Instead of hardcoding the link speed in MBps, let's make use of the existing QCOM_PCIE_LINK_SPEED_TO_BW() macro that does the encoding of the link speed for us. This eliminates the need for a switch case in qcom_pcie_icc_update() and also works for future Gen speeds without any code modifications. Suggested-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> --- Changes in v2: - Switched to QCOM_PCIE_LINK_SPEED_TO_BW() macro as per Bjorn's suggestion https://lore.kernel.org/linux-pci/20230924160713.217086-1-manivannan.sadhasivam@xxxxxxxxxx/ drivers/pci/controller/dwc/pcie-qcom.c | 24 ++++++------------------ 1 file changed, 6 insertions(+), 18 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 297442c969b6..dce80d6dc88f 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -148,6 +148,9 @@ #define QCOM_PCIE_CRC8_POLYNOMIAL (BIT(2) | BIT(1) | BIT(0)) +#define QCOM_PCIE_LINK_SPEED_TO_BW(speed) \ + MBps_to_icc(PCIE_SPEED2MBS_ENC(pcie_link_speed[speed]) / BITS_PER_BYTE) + #define QCOM_PCIE_1_0_0_MAX_CLOCKS 4 struct qcom_pcie_resources_1_0_0 { struct clk_bulk_data clks[QCOM_PCIE_1_0_0_MAX_CLOCKS]; @@ -1347,7 +1350,7 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie) * Set an initial peak bandwidth corresponding to single-lane Gen 1 * for the pcie-mem path. */ - ret = icc_set_bw(pcie->icc_mem, 0, MBps_to_icc(250)); + ret = icc_set_bw(pcie->icc_mem, 0, QCOM_PCIE_LINK_SPEED_TO_BW(1)); if (ret) { dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n", ret); @@ -1360,7 +1363,7 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie) static void qcom_pcie_icc_update(struct qcom_pcie *pcie) { struct dw_pcie *pci = pcie->pci; - u32 offset, status, bw; + u32 offset, status; int speed, width; int ret; @@ -1377,22 +1380,7 @@ static void qcom_pcie_icc_update(struct qcom_pcie *pcie) speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status); width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status); - switch (speed) { - case 1: - bw = MBps_to_icc(250); - break; - case 2: - bw = MBps_to_icc(500); - break; - default: - WARN_ON_ONCE(1); - fallthrough; - case 3: - bw = MBps_to_icc(985); - break; - } - - ret = icc_set_bw(pcie->icc_mem, 0, width * bw); + ret = icc_set_bw(pcie->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed)); if (ret) { dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n", ret); -- 2.25.1
