According to the PCI Express Card Electromechanical Specification, Power stable to PERST# inactive interval is 100 ms as minimum. So, add the macro to use PCIe controller drivers. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx> --- drivers/pci/pci.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 39a8932dc340..5ecbcf041179 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -13,6 +13,9 @@ #define PCIE_LINK_RETRAIN_TIMEOUT_MS 1000 +/* Power stable to PERST# inactive from PCIe card Electromechanical Spec */ +#define PCIE_T_PVPERL_MS 100 + /* * PCIe r6.0, sec 5.3.3.2.1 <PME Synchronization> * Recommends 1ms to 10ms timeout to check L2 ready. -- 2.25.1