On Thu, 14 Sep 2023, Mario Limonciello wrote:
> Iain reports that USB devices can't be used to wake a Lenovo Z13
> from suspend. This problem occurs because the PCIe root port has been put
> into D3hot and AMD's platform can't handle USB devices waking the platform
> from a hardware sleep state in this case. The platform is put into
> a hardware sleep state by the actions of the amd-pmc driver.
>
> Although the issue is initially reported on a single model it actually
> affects all Yellow Carp (Rembrandt) and Pink Sardine (Phoenix) SoCs.
> This problem only occurs on Linux specifically when attempting to
> wake the platform from a hardware sleep state.
> Comparing the behavior on Windows and Linux, Windows doesn't put
> the root ports into D3 at this time.
>
> Linux decides the target state to put the device into at suspend by
> this policy:
> 1. If platform_pci_power_manageable():
> Use platform_pci_choose_state()
> 2. If the device is armed for wakeup:
> Select the deepest D-state that supports a PME.
> 3. Else:
> Use D3hot.
>
> Devices are considered power manageable by the platform when they have
> one or more objects described in the table in section 7.3 of the ACPI 6.5
> specification [1]. In this case the root ports are not power manageable.
>
> If devices are not considered power manageable; specs are ambiguous as
> to what should happen. In this situation Windows 11 puts PCIe ports
> in D0 ostensibly due the policy from the "uPEP driver" which is a
> complimentary driver the Linux "amd-pmc" driver.
>
> Linux chooses to allow D3 for these root ports due to the policy
> introduced by commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during
> suspend").
>
> The Windows uPEP driver expresses the desired state that should be
> selected for suspend but Linux doesn't, so introduce a quirk for the
> problematic root ports.
>
> The quirk removes PME support for D3hot and D3cold at suspend time if the
> system will be using s2idle. When the port is configured for wakeup this
> will prevent these states from being selected in pci_target_state().
>
> After the system is resumes the PME support is re-read from the PM
> capabilities register to allow opportunistic power savings at runtime by
> letting the root port go into D3hot or D3cold.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Link: https://learn.microsoft.com/en-us/windows-hardware/design/device-experiences/platform-design-for-modern-standby#low-power-core-silicon-cpu-soc-dram [1]
> Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend")
> Reported-by: Iain Lane <iain@xxxxxxxxxxxxxxxxxxx>
> Closes: https://forums.lenovo.com/t5/Ubuntu/Z13-can-t-resume-from-suspend-with-external-USB-keyboard/m-p/5217121
> Signed-off-by: Mario Limonciello <mario.limonciello@xxxxxxx>
> ---
> drivers/pci/quirks.c | 61 ++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 61 insertions(+)
>
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index eeec1d6f9023..ebc0afbc814e 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -6188,3 +6188,64 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a31, dpc_log_size);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5020, of_pci_make_dev_node);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5021, of_pci_make_dev_node);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REDHAT, 0x0005, of_pci_make_dev_node);
> +
> +/*
> + * When AMD PCIe root ports with AMD USB4 controllers attached to them are put
> + * into D3hot or D3cold downstream USB devices may fail to wakeup the system.
> + * This manifests as a missing wakeup interrupt.
> + *
> + * Prevent the associated root port from using PME to wake from D3hot or
> + * D3cold power states during s2idle.
> + * This will effectively put the root port into D0 power state over s2idle.
> + */
> +static bool child_has_amd_usb4(struct pci_dev *pdev)
> +{
> + struct pci_dev *child = NULL;
> +
> + while ((child = pci_get_class(PCI_CLASS_SERIAL_USB_USB4, child))) {
> + if (child->vendor != PCI_VENDOR_ID_AMD)
> + continue;
> + if (pcie_find_root_port(child) != pdev)
> + continue;
> + return true;
> + }
> +
> + return false;
> +}
> +
> +static void quirk_reenable_pme(struct pci_dev *dev)
> +{
> + u16 pmc;
> +
> + if (!dev->pm_cap)
> + return;
> +
> + if (!child_has_amd_usb4(dev))
> + return;
> +
> + pci_read_config_word(dev, dev->pm_cap + PCI_PM_PMC, &pmc);
> + pmc &= PCI_PM_CAP_PME_MASK;
> + dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
FIELD_GET(PCI_PM_CAP_PME_MASK, pmc);
--
i.
> +}
> +
> +static void quirk_disable_pme_suspend(struct pci_dev *dev)
> +{
> + int mask;
> +
> + if (pm_suspend_via_firmware())
> + return;
> +
> + if (!child_has_amd_usb4(dev))
> + return;
> +
> + mask = (PCI_PM_CAP_PME_D3hot|PCI_PM_CAP_PME_D3cold) >> PCI_PM_CAP_PME_SHIFT;
> + if (!(dev->pme_support & mask))
> + return;
> + dev->pme_support &= ~mask;
> + dev_info_once(&dev->dev, "quirk: disabling PME from D3hot and D3cold at suspend\n");
> +}
> +
> +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x14b9, quirk_disable_pme_suspend);
> +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x14b9, quirk_reenable_pme);
> +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x14eb, quirk_disable_pme_suspend);
> +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x14eb, quirk_reenable_pme);
>
