RE: [PATCH] HID: intel-ish-hid: ipc: Rework EHL OOB wakeup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Kai-Heng,

I am also not familiar with this S5 wakeup test case.
I already sent out mails to ask for help on it.
Will come back to you once I get feedback.
Thanks!

Best Regards,
Even Xu

-----Original Message-----
From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> 
Sent: Friday, September 15, 2023 2:01 PM
To: Xu, Even <even.xu@xxxxxxxxx>
Cc: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>; jikos@xxxxxxxxxx; benjamin.tissoires@xxxxxxxxxx; linux-pm@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; Lee, Jian Hui <jianhui.lee@xxxxxxxxxxxxx>; Zhang, Lixu <lixu.zhang@xxxxxxxxx>; Ba, Najumon <najumon.ba@xxxxxxxxx>; linux-input@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Subject: Re: [PATCH] HID: intel-ish-hid: ipc: Rework EHL OOB wakeup

Hi Even,

On Fri, Sep 15, 2023 at 1:31 PM Xu, Even <even.xu@xxxxxxxxx> wrote:
>
> Hi, Srinivas,
>
> Sure, I will test it.
> As long term not working on EHL, I doesn't have EHL board on hand right now, I can test this patch on other ISH related platforms.
> From the patch, it's focus on EHL platform, I assume Kai-Heng already verified the function on EHL board.

I only made sure the GPE overflow issue is fixed by the patch, but I didn't test the S5 wakeup.
That's because I don't know how to test it on the EHL system I have.
I'll test it if you can let me know how to test the S5 wakeup.

Kai-Heng

> I don't think it will take effect on other platforms, anyway, I will test it on the platforms I have to provide cross platform verification.
>
> Thanks!
>
> Best Regards,
> Even Xu
>
> -----Original Message-----
> From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
> Sent: Friday, September 15, 2023 12:11 AM
> To: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>; jikos@xxxxxxxxxx; 
> benjamin.tissoires@xxxxxxxxxx
> Cc: linux-pm@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; Lee, Jian Hui 
> <jianhui.lee@xxxxxxxxxxxxx>; Xu, Even <even.xu@xxxxxxxxx>; Zhang, Lixu 
> <lixu.zhang@xxxxxxxxx>; Ba, Najumon <najumon.ba@xxxxxxxxx>; 
> linux-input@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH] HID: intel-ish-hid: ipc: Rework EHL OOB wakeup
>
> Hi Even,
>
> On Thu, 2023-09-14 at 12:18 +0800, Kai-Heng Feng wrote:
> > System cannot suspend more than 255 times because the driver doesn't 
> > have corresponding acpi_disable_gpe() for acpi_enable_gpe(), so the 
> > GPE refcount overflows.
> >
> > Since PCI core and ACPI core already handles PCI PME wake and GPE 
> > wake when the device has wakeup capability, use device_init_wakeup() 
> > to let them do the wakeup setting work.
> >
> > Also add a shutdown callback which uses pci_prepare_to_sleep() to 
> > let PCI and ACPI set OOB wakeup for S5.
> >
> Please test this change.
>
> Thanks,
> Srinivas
>
> > Fixes: 2e23a70edabe ("HID: intel-ish-hid: ipc: finish power flow for 
> > EHL OOB")
> > Cc: Jian Hui Lee <jianhui.lee@xxxxxxxxxxxxx>
> > Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> > ---
> >  drivers/hid/intel-ish-hid/ipc/pci-ish.c | 59 
> > +++++++----------------
> > --
> >  1 file changed, 15 insertions(+), 44 deletions(-)
> >
> > diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> > b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> > index 55cb25038e63..65e7eeb2fa64 100644
> > --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> > +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
> > @@ -119,42 +119,6 @@ static inline bool ish_should_leave_d0i3(struct 
> > pci_dev *pdev)
> >         return !pm_resume_via_firmware() || pdev->device == 
> > CHV_DEVICE_ID;  }
> >
> > -static int enable_gpe(struct device *dev) -{ -#ifdef CONFIG_ACPI
> > -       acpi_status acpi_sts;
> > -       struct acpi_device *adev;
> > -       struct acpi_device_wakeup *wakeup;
> > -
> > -       adev = ACPI_COMPANION(dev);
> > -       if (!adev) {
> > -               dev_err(dev, "get acpi handle failed\n");
> > -               return -ENODEV;
> > -       }
> > -       wakeup = &adev->wakeup;
> > -
> > -       acpi_sts = acpi_enable_gpe(wakeup->gpe_device, wakeup-
> > >gpe_number);
> > -       if (ACPI_FAILURE(acpi_sts)) {
> > -               dev_err(dev, "enable ose_gpe failed\n");
> > -               return -EIO;
> > -       }
> > -
> > -       return 0;
> > -#else
> > -       return -ENODEV;
> > -#endif
> > -}
> > -
> > -static void enable_pme_wake(struct pci_dev *pdev) -{
> > -       if ((pci_pme_capable(pdev, PCI_D0) ||
> > -            pci_pme_capable(pdev, PCI_D3hot) ||
> > -            pci_pme_capable(pdev, PCI_D3cold)) && !enable_gpe(&pdev-
> > >dev)) {
> > -               pci_pme_active(pdev, true);
> > -               dev_dbg(&pdev->dev, "ish ipc driver pme wake
> > enabled\n");
> > -       }
> > -}
> > -
> >  /**
> >   * ish_probe() - PCI driver probe callback
> >   * @pdev:      pci device
> > @@ -225,7 +189,7 @@ static int ish_probe(struct pci_dev *pdev, const 
> > struct pci_device_id *ent)
> >
> >         /* Enable PME for EHL */
> >         if (pdev->device == EHL_Ax_DEVICE_ID)
> > -               enable_pme_wake(pdev);
> > +               device_init_wakeup(dev, true);
> >
> >         ret = ish_init(ishtp);
> >         if (ret)
> > @@ -248,6 +212,19 @@ static void ish_remove(struct pci_dev *pdev)
> >         ish_device_disable(ishtp_dev);  }
> >
> > +
> > +/**
> > + * ish_shutdown() - PCI driver shutdown callback
> > + * @pdev:      pci device
> > + *
> > + * This function sets up wakeup for S5  */ static void 
> > +ish_shutdown(struct pci_dev *pdev) {
> > +       if (pdev->device == EHL_Ax_DEVICE_ID)
> > +               pci_prepare_to_sleep(pdev); }
> > +
> >  static struct device __maybe_unused *ish_resume_device;
> >
> >  /* 50ms to get resume response */
> > @@ -370,13 +347,6 @@ static int __maybe_unused ish_resume(struct 
> > device *device)
> >         struct pci_dev *pdev = to_pci_dev(device);
> >         struct ishtp_device *dev = pci_get_drvdata(pdev);
> >
> > -       /* add this to finish power flow for EHL */
> > -       if (dev->pdev->device == EHL_Ax_DEVICE_ID) {
> > -               pci_set_power_state(pdev, PCI_D0);
> > -               enable_pme_wake(pdev);
> > -               dev_dbg(dev->devc, "set power state to D0 for ehl\n");
> > -       }
> > -
> >         ish_resume_device = device;
> >         dev->resume_flag = 1;
> >
> > @@ -392,6 +362,7 @@ static struct pci_driver ish_driver = {
> >         .id_table = ish_pci_tbl,
> >         .probe = ish_probe,
> >         .remove = ish_remove,
> > +       .shutdown = ish_shutdown,
> >         .driver.pm = &ish_pm_ops,
> >  };
> >
>




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux