RE: [PATCH v20 04/19] PCI: designware-ep: Add INTx IRQs support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

> From: Bjorn Helgaas, Sent: Thursday, September 14, 2023 8:31 AM
> 
> On Fri, Aug 25, 2023 at 06:32:04PM +0900, Yoshihiro Shimoda wrote:
> > Add support for triggering INTx IRQs by using outbound iATU.
> > Outbound iATU is utilized to send assert and de-assert INTA TLPs
> > as simulated edge IRQ for INTA. (Other INT[BCD] are not asserted.)
> > This INTx support is optional (if there is no memory for INTx,
> > probe will not fail).
> >
> > The message is generated based on the payloadless Msg TLP with type
> > 0x14, where 0x4 is the routing code implying the Terminate at
> > Receiver message. The message code is specified as b1000xx for
> > the INTx assertion and b1001xx for the INTx de-assertion.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>
> > ---
> >  .../pci/controller/dwc/pcie-designware-ep.c   | 70 +++++++++++++++++--
> >  drivers/pci/controller/dwc/pcie-designware.h  |  2 +
> >  2 files changed, 68 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > index 747d5bc07222..91e3c4335031 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > @@ -6,9 +6,11 @@
> >   * Author: Kishon Vijay Abraham I <kishon@xxxxxx>
> >   */
> >
> > +#include <linux/delay.h>
> >  #include <linux/of.h>
> >  #include <linux/platform_device.h>
> >
> > +#include "../../pci.h"
> >  #include "pcie-designware.h"
> >  #include <linux/pci-epc.h>
> >  #include <linux/pci-epf.h>
> > @@ -484,14 +486,61 @@ static const struct pci_epc_ops epc_ops = {
> >  	.get_features		= dw_pcie_ep_get_features,
> >  };
> >
> > +static int dw_pcie_ep_send_msg(struct dw_pcie_ep *ep, u8 func_no, u8 code,
> > +			       u8 routing)
> > +{
> > +	struct dw_pcie_ob_atu_cfg atu = { 0 };
> > +	struct pci_epc *epc = ep->epc;
> > +	int ret;
> > +
> > +	atu.func_no = func_no;
> > +	atu.code = code;
> > +	atu.routing = routing;
> > +	atu.type = PCIE_ATU_TYPE_MSG;
> > +	atu.cpu_addr = ep->intx_mem_phys;
> > +	atu.size = epc->mem->window.page_size;
> > +
> > +	ret = dw_pcie_ep_outbound_atu(ep, &atu);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* A dummy-write ep->intx_mem is converted to a Msg TLP */
> > +	writel(0, ep->intx_mem);
> > +
> > +	dw_pcie_ep_unmap_addr(epc, func_no, 0, ep->intx_mem_phys);
> > +
> > +	return 0;
> > +}
> > +
> >  int dw_pcie_ep_raise_legacy_irq(struct dw_pcie_ep *ep, u8 func_no)
> >  {
> >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> >  	struct device *dev = pci->dev;
> > +	int ret;
> >
> > -	dev_err(dev, "EP cannot trigger legacy IRQs\n");
> > +	if (!ep->intx_mem) {
> > +		dev_err(dev, "legacy IRQs not supported\n");
> > +		return -EOPNOTSUPP;
> > +	}
> >
> > -	return -EINVAL;
> > +	/*
> > +	 * Even though the PCI bus specification implies the level-triggered
> > +	 * INTx interrupts the kernel PCIe endpoint framework has a single
> > +	 * PCI_EPC_IRQ_INTx flag defined for the legacy IRQs simulation. Thus
> > +	 * this function sends the Deassert_INTx PCIe TLP after the Assert_INTx
> > +	 * message with the 50 usec duration basically implementing the
> > +	 * rising-edge triggering IRQ. Hopefully the interrupt controller will
> > +	 * still be able to register the incoming IRQ event...
> 
> I'm not really convinced about this "assert INTA, wait 50us, deassert
> INTA" thing.  All the INTx language in the spec is like this:
> 
>   ... the virtual INTx wire must be asserted whenever and *as long as*
>   the following conditions are satisfied:
> 
>     - The Interrupt Disable bit in the Command register is set to 0b.
> 
>     - The <feature> Interrupt Enable bit in the <feature> Control
>       Register is set to 1b.
> 
>     - The <feature> Status bit in the <feature> Status register is
>       set.
> 
> E.g., sec PCIe r6.0, sec 5.5.6 (Link Activation), 6.1.6 (Native PME),
> 6.2.4.1.2 (AER Interrupt Generation), 6.2.11.1 (DPC Interrupts),
> 6.7.3.4 (Software Notification of Hot-Plug Events).
> 
> So it seems to me like the endpoint needs an "interrupt status" bit,
> and the Deassert_INTx message would be sent when the host interrupt
> handler clears that bit.

Thank you very much for your comments! About this topic, 
Frank also has a similar opinion before [1]. So, I asked Kishon
about this, but I didn't get any comment from Kishon at that time.
Anyway, to handle INTx on PCIe endpoint framework properly,
we need to modify the PCIe Endpoint framework, IIUC.

Should I modify the PCIe Endpoint framework at first?
Or, can this patch be applied as-is? 
I guess that such modification of the PCIe Endpoint framework
need much time. So, if I should modify the framework at first,
I would like to drop adding INTx support [2] from my patch series
because supporting INTx on my PCIe controller is not mandatory.

[1]
https://lore.kernel.org/linux-pci/TYBPR01MB5341EFAC471AEBB9100D6051D8719@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/

[2]
The following patches are not needed if INTx support should be dropped:

eb185e1e628a PCI: designware-ep: Add INTx IRQs support
5d0e51f85b23 PCI: dwc: Add outbound MSG TLPs support
4758bef61cc2 PCI: dwc: Change arguments of dw_pcie_prog_outbound_atu()
44938b13046b PCI: Add INTx Mechanism Messages macros

Best regards,
Yoshihiro Shimoda

> > +	 */
> > +	ret = dw_pcie_ep_send_msg(ep, func_no, PCI_MSG_CODE_ASSERT_INTA,
> > +				  PCI_MSG_TYPE_R_LOCAL);
> > +	if (ret)
> > +		return ret;
> > +
> > +	usleep_range(50, 100);
> > +
> > +	return dw_pcie_ep_send_msg(ep, func_no, PCI_MSG_CODE_DEASSERT_INTA,
> > +				   PCI_MSG_TYPE_R_LOCAL);
> >  }
> >  EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_legacy_irq);
> >
> > @@ -622,6 +671,10 @@ void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
> >
> >  	dw_pcie_edma_remove(pci);
> >
> > +	if (ep->intx_mem)
> > +		pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem,
> > +				      epc->mem->window.page_size);
> > +
> >  	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
> >  			      epc->mem->window.page_size);
> >
> > @@ -793,9 +846,14 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> >  		goto err_exit_epc_mem;
> >  	}
> >
> > +	ep->intx_mem = pci_epc_mem_alloc_addr(epc, &ep->intx_mem_phys,
> > +					      epc->mem->window.page_size);
> > +	if (!ep->intx_mem)
> > +		dev_warn(dev, "Failed to reserve memory for INTx\n");
> > +
> >  	ret = dw_pcie_edma_detect(pci);
> >  	if (ret)
> > -		goto err_free_epc_mem;
> > +		goto err_free_epc_mem_intx;
> >
> >  	if (ep->ops->get_features) {
> >  		epc_features = ep->ops->get_features(ep);
> > @@ -812,7 +870,11 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> >  err_remove_edma:
> >  	dw_pcie_edma_remove(pci);
> >
> > -err_free_epc_mem:
> > +err_free_epc_mem_intx:
> > +	if (ep->intx_mem)
> > +		pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem,
> > +				      epc->mem->window.page_size);
> > +
> >  	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
> >  			      epc->mem->window.page_size);
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > index 8f22a7bc0523..e02d4986bc2b 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -376,6 +376,8 @@ struct dw_pcie_ep {
> >  	unsigned long		*ob_window_map;
> >  	void __iomem		*msi_mem;
> >  	phys_addr_t		msi_mem_phys;
> > +	void __iomem		*intx_mem;
> > +	phys_addr_t		intx_mem_phys;
> >  	struct pci_epf_bar	*epf_bar[PCI_STD_NUM_BARS];
> >  };
> >
> > --
> > 2.25.1
> >




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux