On 6/23/23 08:40, Jim Quinlan wrote:
Hi Jim,
As I understand, the issue that this patch fixes can be difficult to
trigger reliably. So I'll report that the abort occurs 100% of the time
on a Compute Module 4, installed in slot 3 of a Turing Pi 2 cluster
board, when a bootloader (U-Boot, in my case) is in the boot path. The
third slot of the TP2 board connects to an ASM1061 chip with the CLKREQ#
line left floating. I do not know why the bootloader is necessary for
the crash to occur; I suspect it's timing-related.
With this patch applied to my kernel, my observed crash rate goes from
100% to 0%, so:
Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
Tested-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Tested-by: Cyril Brulebois <cyril@xxxxxxxxxxx>
Tested-by: Sam Edwards <CFSworks@xxxxxxxxx>
Many thanks,
Sam
