Fix minor issues of rcar-gen4-pci-host.yaml. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> --- This patch will be squashed into the following commit on the pci.git / controller/rcar branch so that many fixes into a patch: dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git/commit/?h=controller/rcar&id=af285bc39885eaeed434c607a977d664916681a7 --- .../bindings/pci/rcar-gen4-pci-host.yaml | 36 ++++++++++--------- 1 file changed, 20 insertions(+), 16 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml index 513a3416dd8e..ffb34339b637 100644 --- a/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-gen4-pci-host.yaml @@ -20,7 +20,7 @@ properties: - const: renesas,rcar-gen4-pcie # R-Car Gen4 reg: - maxItems: 6 + maxItems: 7 reg-names: items: @@ -29,6 +29,7 @@ properties: - const: atu - const: dma - const: app + - const: phy - const: config interrupts: @@ -55,7 +56,7 @@ properties: resets: maxItems: 1 - resets-names: + reset-names: items: - const: pwr @@ -68,7 +69,9 @@ properties: required: - compatible - reg + - reg-names - interrupts + - interrupt-names - clocks - clock-names - power-domains @@ -91,8 +94,21 @@ examples: compatible = "renesas,r8a779f0-pcie", "renesas,rcar-gen4-pcie"; reg = <0 0xe65d0000 0 0x1000>, <0 0xe65d2000 0 0x0800>, <0 0xe65d3000 0 0x2000>, <0 0xe65d5000 0 0x1200>, - <0 0xe65d6200 0 0x0e00>, <0 0xfe000000 0 0x400000>; - reg-names = "dbi", "dbi2", "atu", "dma", "app", "config"; + <0 0xe65d6200 0 0x0e00>, <0 0xe65d7000 0 0x0400>, + <0 0xfe000000 0 0x400000>; + reg-names = "dbi", "dbi2", "atu", "dma", "app", "phy", "config"; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi", "dma", "sft_ce", "app"; + clocks = <&cpg CPG_MOD 624>, <&pcie0_clkref>; + clock-names = "core", "ref"; + power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; + resets = <&cpg 624>; + reset-names = "pwr"; + max-link-speed = <4>; + num-lanes = <2>; #address-cells = <3>; #size-cells = <2>; bus-range = <0x00 0xff>; @@ -100,24 +116,12 @@ examples: ranges = <0x01000000 0 0x00000000 0 0xfe000000 0 0x00400000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x10000000>; dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi", "dma", "sft_ce", "app"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 2 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 3 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &gic GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 624>, <&clkref>; - clock-names = "core", "ref"; - power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>; - resets = <&cpg 624>; - reset-names = "pwr"; - num-lanes = <2>; snps,enable-cdm-check; - max-link-speed = <4>; }; }; -- 2.25.1
