Re: (subset) [PATCH v6 0/5] PCI: brcmstb: Configure appropriate HW CLKREQ# mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 23 Jun 2023 10:40:53 -0400, Jim Quinlan wrote:
> v6 -- No code has been changed.
>    -- Changed commit subject and comment in "#PERST" commit (Bjorn, Cyril)
>    -- Changed sign-off and author email address for all commits.
>       This was due to a change in Broadcom's upstreaming policy.
> 
> v5 -- Remove DT property "brcm,completion-timeout-us" from
>       "DT bindings" commit.  Although this error may be reported
>       as a completion timeout, its cause was traced to an
>       internal bus timeout which may occur even when there is
>       no PCIe access being processed.  We set a timeout of four
>       seconds only if we are operating in "L1SS CLKREQ#" mode.
>    -- Correct CEM 2.0 reference provided by HW engineer,
>       s/3.2.5.2.5/3.2.5.2.2/ (Bjorn)
>    -- Add newline to dev_info() string (Stefan)
>    -- Change variable rval to unsigned (Stefan)
>    -- s/implementaion/implementation/ (Bjorn)
>    -- s/superpowersave/powersupersave/ (Bjorn)
>    -- Slightly modify message on "PERST#" commit.
>    -- Rebase to torvalds master
> 
> [...]

Applied to controller/brcmstb, thanks!

[4/5] PCI: brcmstb: Assert PERST# on BCM2711
      https://git.kernel.org/pci/pci/c/8eb8c2735306
[5/5] PCI: brcmstb: Remove stale comment
      https://git.kernel.org/pci/pci/c/6dac1507a654

Thanks,
Lorenzo



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux