[PATCH v5 1/2] PCI/VGA: Make the vga_is_firmware_default() less arch-dependent

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently, the vga_is_firmware_default() function only works on x86 and
ia64, it is a no-op on the rest of the architectures. This patch completes
the implementation for it, the added code tries to capture the PCI (e) VGA
device that owns the firmware framebuffer, since only one GPU could own
the firmware fb, things are almost done once we have determined the boot
VGA device. As the PCI resource relocation do have a influence on the
results of identification, we make it available on architectures where PCI
resource relocation does happen at first. Because this patch is more
important for those architectures(such as arm, arm64, loongarch, mips and
risc-v etc).

Signed-off-by: Sui Jingfeng <suijingfeng@xxxxxxxxxxx>
---
 drivers/pci/vgaarb.c | 76 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 75 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/vgaarb.c b/drivers/pci/vgaarb.c
index 5a696078b382..bc5fcc855513 100644
--- a/drivers/pci/vgaarb.c
+++ b/drivers/pci/vgaarb.c
@@ -60,7 +60,8 @@ static int vga_count, vga_decode_count;
 static bool vga_arbiter_used;
 static DEFINE_SPINLOCK(vga_lock);
 static DECLARE_WAIT_QUEUE_HEAD(vga_wait_queue);
-
+/* The PCI(e) device who owns the firmware framebuffer */
+static struct pci_dev *pdev_boot_vga;
 
 static const char *vga_iostate_to_str(unsigned int iostate)
 {
@@ -571,6 +572,9 @@ static bool vga_is_firmware_default(struct pci_dev *pdev)
 
 		return true;
 	}
+#else
+	if (pdev_boot_vga && pdev_boot_vga == pdev)
+		return true;
 #endif
 	return false;
 }
@@ -1555,3 +1559,73 @@ static int __init vga_arb_device_init(void)
 	return rc;
 }
 subsys_initcall_sync(vga_arb_device_init);
+
+/*
+ * Get the physical address range that the firmware framebuffer occupies.
+ *
+ * Note that the global screen_info is arch-specific, thus CONFIG_SYSFB is
+ * chosen as compile-time conditional to suppress linkage problems on non-x86
+ * architectures.
+ *
+ * Returns true on success, otherwise return false.
+ */
+static bool vga_arb_get_firmware_fb_range(u64 *start, u64 *end)
+{
+	u64 fb_start = 0;
+	u64 fb_size = 0;
+	u64 fb_end;
+
+#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_SYSFB)
+	fb_start = screen_info.lfb_base;
+	if (screen_info.capabilities & VIDEO_CAPABILITY_64BIT_BASE)
+		fb_start |= (u64)screen_info.ext_lfb_base << 32;
+
+	fb_size = screen_info.lfb_size;
+#endif
+
+	/* No firmware framebuffer support */
+	if (!fb_start || !fb_size)
+		return false;
+
+	fb_end = fb_start + fb_size - 1;
+
+	*start = fb_start;
+	*end = fb_end;
+
+	return true;
+}
+
+/*
+ * Identify the PCI VGA device that contains the firmware framebuffer
+ */
+static void pci_boot_vga_capturer(struct pci_dev *pdev)
+{
+	u64 fb_start, fb_end;
+	struct resource *res;
+	unsigned int i;
+
+	if (pdev_boot_vga)
+		return;
+
+	if (!vga_arb_get_firmware_fb_range(&fb_start, &fb_end))
+		return;
+
+	pci_dev_for_each_resource(pdev, res, i) {
+		if (resource_type(res) != IORESOURCE_MEM)
+			continue;
+
+		if (!res->start || !res->end)
+			continue;
+
+		if (res->start <= fb_start && fb_end <= res->end) {
+			pdev_boot_vga = pdev;
+
+			vgaarb_info(&pdev->dev,
+				    "BAR %u: %pR contains firmware FB [0x%llx-0x%llx]\n",
+				    i, res, fb_start, fb_end);
+			break;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA,
+			       8, pci_boot_vga_capturer);
-- 
2.34.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux