Instead of if conditions with line splits, use the usual error handling
pattern with a separate variable to improve readability.
No functional changes intended.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-ali15x3.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index cc58feacd082..6fedecef9df3 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -122,6 +122,7 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
{
u16 a;
unsigned char temp;
+ int ret;
/* Check the following things:
- SMB I/O address is initialized
@@ -167,12 +168,11 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
if(force_addr) {
dev_info(&ALI15X3_dev->dev, "forcing ISA address 0x%04X\n",
ali15x3_smba);
- if (PCIBIOS_SUCCESSFUL != pci_write_config_word(ALI15X3_dev,
- SMBBA,
- ali15x3_smba))
+ ret = pci_write_config_word(ALI15X3_dev, SMBBA, ali15x3_smba);
+ if (ret != PCIBIOS_SUCCESSFUL)
goto error;
- if (PCIBIOS_SUCCESSFUL != pci_read_config_word(ALI15X3_dev,
- SMBBA, &a))
+ ret = pci_read_config_word(ALI15X3_dev, SMBBA, &a);
+ if (ret != PCIBIOS_SUCCESSFUL)
goto error;
if ((a & ~(ALI15X3_SMB_IOSIZE - 1)) != ali15x3_smba) {
/* make sure it works */
--
2.30.2
