Re: [PATCH v1] PCI: qcom: Add sysfs entry to change link speed dynamically

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 17, 2023 at 08:04:43AM +0530, Krishna chaitanya chundru wrote:
> PCIe can operate on lower GEN speed if client decided based upon
> the bandwidth & latency requirements. To support dynamic GEN speed
> switch adding this sysfs support.
> 
> To change the GEN speed the link should be in L0, so first disable
> L0s & L1.
> 
> L0s needs to be disabled at both RC & EP because L0s entry is
> independent. For enabling L0s both ends of the link needs to support
> it, so first check if L0s is supported on both ends and then enable
> L0s.
> 
> This patch is dependent on "PCI: qcom: Add support for OPP"
> https://lore.kernel.org/linux-arm-msm/1692192264-18515-1-git-send-email-quic_krichai@xxxxxxxxxxx/T/#t
> 

There is also an ongoing proposal to add PCIe bandwidth controller driver [1]
which more or less does the same thing. Check if you can make use of it.

- Mani

[1] https://lore.kernel.org/linux-pci/20230817121708.53213-1-ilpo.jarvinen@xxxxxxxxxxxxxxx/

> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 141 +++++++++++++++++++++++++++++++++
>  1 file changed, 141 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 831d158..ad67d17 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -241,10 +241,150 @@ struct qcom_pcie {
>  	const struct qcom_pcie_cfg *cfg;
>  	struct dentry *debugfs;
>  	bool suspended;
> +	bool l0s_supported;
>  };
>  
>  #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
>  
> +static void qcom_pcie_icc_update(struct qcom_pcie *pcie);
> +static void qcom_pcie_opp_update(struct qcom_pcie *pcie);
> +
> +static int qcom_pcie_disable_l0s(struct pci_dev *pdev, void *userdata)
> +{
> +	int lnkctl;
> +
> +	pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, &lnkctl);
> +	lnkctl &= ~(PCI_EXP_LNKCTL_ASPM_L0S);
> +	pci_write_config_word(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, lnkctl);
> +
> +	return 0;
> +}
> +
> +static int qcom_pcie_check_l0s_support(struct pci_dev *pdev, void *userdata)
> +{
> +	struct pci_dev *parent = pdev->bus->self;
> +	struct qcom_pcie *pcie = userdata;
> +	struct dw_pcie *pci = pcie->pci;
> +	int lnkcap;
> +
> +	 /* check parent supports L0s */
> +	if (parent) {
> +		dev_err(pci->dev, "parent\n");
> +		pci_read_config_dword(parent, pci_pcie_cap(parent) + PCI_EXP_LNKCAP,
> +				  &lnkcap);
> +		if (!(lnkcap & PCI_EXP_LNKCAP_ASPM_L0S)) {
> +			dev_info(pci->dev, "Parent does not support L0s\n");
> +			pcie->l0s_supported = false;
> +			return 0;
> +		}
> +	}
> +
> +	pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCAP,
> +			  &lnkcap);
> +	dev_err(pci->dev, "child %x\n", lnkcap);
> +	if (!(lnkcap & PCI_EXP_LNKCAP_ASPM_L0S)) {
> +		dev_info(pci->dev, "Device does not support L0s\n");
> +		pcie->l0s_supported = false;
> +		return 0;
> +	}
> +
> +	return 0;
> +}
> +
> +static int qcom_pcie_enable_l0s(struct pci_dev *pdev, void *userdata)
> +{
> +	int lnkctl;
> +
> +	pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, &lnkctl);
> +	lnkctl |= (PCI_EXP_LNKCTL_ASPM_L0S);
> +	pci_write_config_word(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCTL, lnkctl);
> +
> +	return 0;
> +}
> +
> +static ssize_t qcom_pcie_speed_change_store(struct device *dev,
> +			       struct device_attribute *attr,
> +			       const char *buf,
> +			       size_t count)
> +{
> +	unsigned int current_speed, target_speed, max_speed;
> +	struct qcom_pcie *pcie = dev_get_drvdata(dev);
> +	struct pci_bus *child, *root_bus = NULL;
> +	struct dw_pcie_rp *pp = &pcie->pci->pp;
> +	struct dw_pcie *pci = pcie->pci;
> +	struct pci_dev *pdev;
> +	u16 offset;
> +	u32 val;
> +	int ret;
> +
> +	list_for_each_entry(child, &pp->bridge->bus->children, node) {
> +		if (child->parent == pp->bridge->bus) {
> +			root_bus = child;
> +			break;
> +		}
> +	}
> +
> +	pdev = root_bus->self;
> +
> +	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> +
> +	val = readl(pci->dbi_base + offset + PCI_EXP_LNKCAP);
> +	max_speed = FIELD_GET(PCI_EXP_LNKCAP_SLS, val);
> +
> +	val = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
> +	current_speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, val);
> +
> +	ret = kstrtouint(buf, 10, &target_speed);
> +	if (ret)
> +		return ret;
> +
> +	if (target_speed > max_speed)
> +		return -EINVAL;
> +
> +	if (current_speed == target_speed)
> +		return count;
> +
> +	pci_walk_bus(pp->bridge->bus, qcom_pcie_disable_l0s, pcie);
> +
> +	/* Disable L1 */
> +	val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL);
> +	val &= ~(PCI_EXP_LNKCTL_ASPM_L1);
> +	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL, val);
> +
> +	/* Set target GEN speed */
> +	val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL2);
> +	val &= ~PCI_EXP_LNKCTL2_TLS;
> +	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL2, val | target_speed);
> +
> +	ret = pcie_retrain_link(pdev, true);
> +	if (ret)
> +		dev_err(dev, "Link retrain failed %d\n", ret);
> +
> +	/* Enable L1 */
> +	val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL);
> +	val |= (PCI_EXP_LNKCTL_ASPM_L1);
> +	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCTL, val);
> +
> +	pcie->l0s_supported = true;
> +	pci_walk_bus(pp->bridge->bus, qcom_pcie_check_l0s_support, pcie);
> +
> +	if (pcie->l0s_supported)
> +		pci_walk_bus(pp->bridge->bus, qcom_pcie_enable_l0s, pcie);
> +
> +	qcom_pcie_icc_update(pcie);
> +
> +	qcom_pcie_opp_update(pcie);
> +
> +	return count;
> +}
> +static DEVICE_ATTR_WO(qcom_pcie_speed_change);
> +
> +static struct attribute *qcom_pcie_attrs[] = {
> +	&dev_attr_qcom_pcie_speed_change.attr,
> +	NULL,
> +};
> +ATTRIBUTE_GROUPS(qcom_pcie);
> +
>  static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
>  {
>  	gpiod_set_value_cansleep(pcie->reset, 1);
> @@ -1716,6 +1856,7 @@ static struct platform_driver qcom_pcie_driver = {
>  		.of_match_table = qcom_pcie_match,
>  		.pm = &qcom_pcie_pm_ops,
>  		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
> +		.dev_groups = qcom_pcie_groups,
>  	},
>  };
>  builtin_platform_driver(qcom_pcie_driver);
> -- 
> 2.7.4
> 

-- 
மணிவண்ணன் சதாசிவம்



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux