[PATCH 04/10] drm/IB/hfi1: Use RMW accessors for changing LNKCTL2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Don't assume that only the driver would be accessing LNKCTL2. In the
case of upstream (parent), the driver does not even own the device it's
changing the registers for.

Use RMW capability accessors which do proper locking to avoid losing
concurrent updates to the register value. This change is also useful as
a cleanup.

Suggested-by: Lukas Wunner <lukas@xxxxxxxxx>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
 drivers/infiniband/hw/hfi1/pcie.c | 30 ++++++++----------------------
 1 file changed, 8 insertions(+), 22 deletions(-)

diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 08732e1ac966..60a177f52eb5 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -1212,14 +1212,11 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
 		    (u32)lnkctl2);
 	/* only write to parent if target is not as high as ours */
 	if ((lnkctl2 & PCI_EXP_LNKCTL2_TLS) < target_vector) {
-		lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
-		lnkctl2 |= target_vector;
-		dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
-			    (u32)lnkctl2);
-		ret = pcie_capability_write_word(parent,
-						 PCI_EXP_LNKCTL2, lnkctl2);
+		ret = pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL2,
+							 PCI_EXP_LNKCTL2_TLS,
+							 target_vector);
 		if (ret) {
-			dd_dev_err(dd, "Unable to write to PCI config\n");
+			dd_dev_err(dd, "Unable to change PCI target speed\n");
 			return_error = 1;
 			goto done;
 		}
@@ -1228,22 +1225,11 @@ int do_pcie_gen3_transition(struct hfi1_devdata *dd)
 	}
 
 	dd_dev_info(dd, "%s: setting target link speed\n", __func__);
-	ret = pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKCTL2, &lnkctl2);
+	ret = pcie_capability_clear_and_set_word(dd->pcidev, PCI_EXP_LNKCTL2,
+						 PCI_EXP_LNKCTL2_TLS,
+						 target_vector);
 	if (ret) {
-		dd_dev_err(dd, "Unable to read from PCI config\n");
-		return_error = 1;
-		goto done;
-	}
-
-	dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__,
-		    (u32)lnkctl2);
-	lnkctl2 &= ~PCI_EXP_LNKCTL2_TLS;
-	lnkctl2 |= target_vector;
-	dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,
-		    (u32)lnkctl2);
-	ret = pcie_capability_write_word(dd->pcidev, PCI_EXP_LNKCTL2, lnkctl2);
-	if (ret) {
-		dd_dev_err(dd, "Unable to write to PCI config\n");
+		dd_dev_err(dd, "Unable to change PCI target speed\n");
 		return_error = 1;
 		goto done;
 	}
-- 
2.30.2




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux