PCIe needs to choose the appropriate performance state of RPMH power domain based upon the PCIe gen speed. So let's add the OPP table support to specify RPMH performance states. Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 47 ++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 595533a..c77a683 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -1803,7 +1803,28 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; + operating-points-v2 = <&pcie0_opp_table>; + status = "disabled"; + + pcie0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; pcie0_phy: phy@1c06000 { @@ -1915,7 +1936,33 @@ pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; + operating-points-v2 = <&pcie1_opp_table>; + status = "disabled"; + + pcie1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-8000000 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-16000000 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; pcie1_phy: phy@1c0f000 { -- 2.7.4