Re: [PATCH v1 2/3] arm64: dts: qcom: sm8450: Add opp table support to PCIe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/15/2023 6:01 PM, Krzysztof Kozlowski wrote:
On 15/08/2023 14:26, Krishna chaitanya chundru wrote:
PCIe needs to choose the appropriate performance state of RPMH power
domain based upon the PCIe gen speed.
This explanation should be also in bindings patch, otherwise why would
we consider the bindings patch?
I will update binding patch with this information.

So, let's add the OPP table support to specify RPMH performance states.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sm8450.dtsi | 47 ++++++++++++++++++++++++++++++++++++
  1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 595533a..681ea9c 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -381,6 +381,49 @@
  		};
  	};
+ pcie0_opp_table: opp-table-pcie0 {
+		compatible = "operating-points-v2";
+
+		opp-2500000 {
+			opp-hz = /bits/ 64 <2500000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+		};
+
+		opp-5000000 {
+			opp-hz = /bits/ 64 <5000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+		};
+
+		opp-8000000 {
+			opp-hz = /bits/ 64 <8000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+		};
+	};
+
+	pcie1_opp_table: opp-table-pcie1 {
+		compatible = "operating-points-v2";
+
+		opp-2500000 {
+			opp-hz = /bits/ 64 <2500000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+		};
+
+		opp-5000000 {
+			opp-hz = /bits/ 64 <5000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+		};
+
+		opp-8000000 {
+			opp-hz = /bits/ 64 <8000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+		};
+
+		opp-16000000 {
+			opp-hz = /bits/ 64 <16000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+		};
+	};
+
  	reserved_memory: reserved-memory {
  		#address-cells = <2>;
  		#size-cells = <2>;
@@ -1803,6 +1846,8 @@
  			pinctrl-names = "default";
  			pinctrl-0 = <&pcie0_default_state>;
+ operating-points-v2 = <&pcie0_opp_table>;
Why the table is not here? Is it shared with multiple devices?

I will move the table to here in the next patch.

- KC


Best regards,
Krzysztof




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux