[PATCH] PCI: Allocate maximum available buses to help extending the daisy chain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In the case of Thunderbolt, it contains a PCIe switch and one or
more hotplug-capable PCIe downstream ports where the daisy chain
can be extended.

Currently when a Thunderbolt Dock is plugged in during S5/Reboot,
System BIOS allocates a very minimal number of buses for bridges and
hot-plug capable PCIe downstream ports to enumerate the dock during
boot. Because of this, we run out of bus space pretty quickly when
more PCIe devices are attached to hotplug downstream ports in order
to extend the chain.

Before:
           +-04.0
           +-04.1-[63-c1]----00.0-[64-69]--+-00.0-[65]--
           |                               +-01.0-[66]--
           |                               +-02.0-[67]--
           |                               +-03.0-[68]--
           |                               \-04.0-[69]--
           +-08.0

In case of a thunderbolt capable bridge, reconfigure the buses allocated
by BIOS to the maximum available buses. So that the hot-plug bridges gets
maximum buses and chain can be extended to accommodate more PCIe devices.
This fix is necessary for all the PCIe downstream ports where the daisy
chain can be extended.

After:
           +-04.0
           +-04.1-[63-c1]----00.0-[64-c1]--+-00.0-[65]--
           |                               +-01.0-[66-84]--
           |                               +-02.0-[85-a3]--
           |                               +-03.0-[a4-c0]--
           |                               \-04.0-[c1]--
           +-08.0

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000
Signed-off-by: Sanjay R Mehta <sanju.mehta@xxxxxxx>
Signed-off-by: Sanath S <Sanath.S@xxxxxxx>
---
 drivers/pci/probe.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 8bac3ce02609..ab7e90ef2382 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1263,6 +1263,8 @@ static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
 	bool fixed_buses;
 	u8 fixed_sec, fixed_sub;
 	int next_busnr;
+	int start = bus->busn_res.start;
+	int end = bus->busn_res.end;
 
 	/*
 	 * Make sure the bridge is powered on to be able to access config
@@ -1292,6 +1294,13 @@ static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev,
 		broken = 1;
 	}
 
+	/* Reconfigure, If maximum buses are not allocated */
+	if (!pass && start != 0 && end != 0xff && subordinate != end) {
+		pci_info(dev, "Bridge has subordinate 0x%x but max busn 0x%x, reconfiguring\n",
+			 subordinate, end);
+		broken = 1;
+	}
+
 	/*
 	 * Disable Master-Abort Mode during probing to avoid reporting of
 	 * bus errors in some architectures.
-- 
2.34.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux