Here we propose this patch series to add support in PCI endpoint driver to wake up host from D3 states. As endpoint cannot send any data/MSI when the D-state is in D3cold or D3hot. Endpoint needs to bring the device back to D0 to send any kind of data. For this endpoint needs to send inband PME the device is in D3 state or toggle wake when the device is D3 cold and vaux is not supplied. Based on the D-state the EPF driver decides to wake host either by toggling wake or by sending PME. When the MHI state is in M3 MHI driver will wakeup the host using the wakeup op. This change is dependent on this series PCI: endpoint: add D-state change notifier support https://lore.kernel.org/linux-pci/1690948281-2143-1-git-send-email-quic_krichai@xxxxxxxxxxx/ --- Changes from v4: - removed the enum to select to send PME or toggle wake and use bool variable in the api itself as suggested by mani. Changes from v3: - changed the bool return type to int for waking the host in mhi ep driver as suggested by dan and bjorn. - Changed commit logs as suggested by bjorn. Changes from v2: - Addressed review comments made by mani. Changes from v1: - Moved from RFC patch to regular patch - Inclueded EPF patch and added a new op patch to notify D-state change. --- Krishna chaitanya chundru (5): PCI: endpoint: Add wakeup host API to EPC core PCI: dwc: Add wakeup host op to pci_epc_ops PCI: qcom-ep: Add wake up host op to dw_pcie_ep_ops PCI: epf-mhi: Add wakeup host op bus: mhi: ep: wake up host if the MHI state is in M3 Documentation/PCI/endpoint/pci-endpoint.rst | 6 +++++ drivers/bus/mhi/ep/main.c | 28 +++++++++++++++++++++++ drivers/pci/controller/dwc/pcie-designware-ep.c | 12 ++++++++++ drivers/pci/controller/dwc/pcie-designware.h | 2 ++ drivers/pci/controller/dwc/pcie-qcom-ep.c | 26 +++++++++++++++++++++ drivers/pci/endpoint/functions/pci-epf-mhi.c | 12 ++++++++++ drivers/pci/endpoint/pci-epc-core.c | 30 +++++++++++++++++++++++++ include/linux/mhi_ep.h | 1 + include/linux/pci-epc.h | 5 +++++ 9 files changed, 122 insertions(+) -- 2.7.4
