On Mon, Jul 24, 2023 at 05:58:30PM -0400, Frank Li wrote:
> From: Hou Zhiqiang <Zhiqiang.Hou@xxxxxxx>
>
> Add PME_Turn_Off/PME_TO_Ack handshake sequence, and finally
> put the PCIe controller into D3 state after the L2/L3 ready
> state transition process completion.
> ...
> +#ifdef CONFIG_PM_SLEEP
> +static int ls_pcie_suspend_noirq(struct device *dev)
> +{
> + struct ls_pcie *pcie = dev_get_drvdata(dev);
> + struct dw_pcie *pci = pcie->pci;
> +
> + if (!pcie->drvdata->pm_support)
> + return 0;
> +
> + return dw_pcie_suspend_noirq(pci);
> +}
> +
> +static int ls_pcie_resume_noirq(struct device *dev)
> +{
> +
> + struct ls_pcie *pcie = dev_get_drvdata(dev);
> + struct dw_pcie *pci = pcie->pci;
> +
> + if (!pcie->drvdata->pm_support)
> + return 0;
> +
> + return dw_pcie_resume_noirq(pci);
> +}
> +#endif /* CONFIG_PM_SLEEP */
You may be able to dispense with some of these #ifdefs as in
https://lore.kernel.org/all/20220720224829.GA1667002@bhelgaas/
> +static const struct dev_pm_ops ls_pcie_pm_ops = {
> + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(ls_pcie_suspend_noirq,
> + ls_pcie_resume_noirq)
> +};
> +
> static struct platform_driver ls_pcie_driver = {
> .probe = ls_pcie_probe,
> .driver = {
> .name = "layerscape-pcie",
> .of_match_table = ls_pcie_of_match,
> .suppress_bind_attrs = true,
> + .pm = &ls_pcie_pm_ops,
> },
> };
> builtin_platform_driver(ls_pcie_driver);
> --
> 2.34.1
>
