On Mon, Jun 19, 2023 at 03:56:04PM +0530, Vidya Sagar wrote:
> This reverts commit 4fb8e46c1bc4 ("PCI: tegra194: Enable
> support for 256 Byte payload").
>
> Consider a PCIe hierarchy with a PCIe switch and a device connected
> downstream of the switch that has support for MPS which is the minimum in
> the hierarchy, and root port programmed with an MPS in its DevCtl register
> that is greater than the minimum. In this scenario, the default bus
> configuration of the kernel i.e. "PCIE_BUS_DEFAULT" doesn't configure the
> MPS settings in the hierarchy correctly resulting in the device with
> support for minimum MPS in the hierarchy receiving the TLPs of size more
> than that. Although this can be addressed by appending "pci=pcie_bus_safe"
> to the kernel command line, it doesn't seem to be a good idea to always
> have this commandline argument even for the basic functionality to work.
I think this has some irrelevant detail (IIUC the problem should
happen even without a switch) and could be more specific (I think the
problem case is RP MPS=256, EP only supports MPS=128).
> Reverting commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256
> Byte payload") avoids this requirement and ensures that the basic
> functionality of the devices irrespective of the hierarchy and the MPS of
> the devices in the hierarchy.
"Ensure" is a transitive verb, so "... ensures that the basic
functionality ..." is missing whatever the object should be.
Maybe something like the following?
After 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte
payload"), we set MPS=256 for tegra194 Root Ports.
By default (CONFIG_PCIE_BUS_DEFAULT set and no "pci=pcie_bus_*"
parameter), Linux configures the MPS of every device to match the
upstream bridge, which is impossible if the Root Port has MPS=256
and a device only supports MPS=128.
This scenario results in uncorrectable Malformed TLP errors if the
Root Port sends TLPs with payloads larger than 128 bytes. These
errors can be avoided by using the "pci=pcie_bus_safe" parameter,
but it doesn't seem to be a good idea to always have this parameter
even for basic functionality to work.
Revert 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte
payload") so the Root Ports default to MPS=128, which all devices
support.
If peer-to-peer DMA is not required, one can use "pci=pcie_bus_perf"
to get the benefit of larger MPS settings.
> To reap the benefits of having support for higher MPS, optionally, one can
> always append the kernel command line with "pci=pcie_bus_perf".
>
> Fixes: 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload")
> Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> ---
> V3:
> * Fixed a build issue
>
> V2:
> * Addressed review comments from Bjorn
>
> drivers/pci/controller/dwc/pcie-tegra194.c | 14 ++------------
> 1 file changed, 2 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index 4fdadc7b045f..a772faff14b5 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -900,11 +900,6 @@ static int tegra_pcie_dw_host_init(struct dw_pcie_rp *pp)
> pcie->pcie_cap_base = dw_pcie_find_capability(&pcie->pci,
> PCI_CAP_ID_EXP);
>
> - val_16 = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_DEVCTL);
> - val_16 &= ~PCI_EXP_DEVCTL_PAYLOAD;
> - val_16 |= PCI_EXP_DEVCTL_PAYLOAD_256B;
> - dw_pcie_writew_dbi(pci, pcie->pcie_cap_base + PCI_EXP_DEVCTL, val_16);
> -
> val = dw_pcie_readl_dbi(pci, PCI_IO_BASE);
> val &= ~(IO_BASE_IO_DECODE | IO_BASE_IO_DECODE_BIT8);
> dw_pcie_writel_dbi(pci, PCI_IO_BASE, val);
> @@ -1756,7 +1751,6 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
> struct device *dev = pcie->dev;
> u32 val;
> int ret;
> - u16 val_16;
>
> if (pcie->ep_state == EP_STATE_ENABLED)
> return;
> @@ -1887,20 +1881,16 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
> pcie->pcie_cap_base = dw_pcie_find_capability(&pcie->pci,
> PCI_CAP_ID_EXP);
>
> - val_16 = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base + PCI_EXP_DEVCTL);
> - val_16 &= ~PCI_EXP_DEVCTL_PAYLOAD;
> - val_16 |= PCI_EXP_DEVCTL_PAYLOAD_256B;
> - dw_pcie_writew_dbi(pci, pcie->pcie_cap_base + PCI_EXP_DEVCTL, val_16);
> -
> /* Clear Slot Clock Configuration bit if SRNS configuration */
> if (pcie->enable_srns) {
> + u16 val_16;
> +
> val_16 = dw_pcie_readw_dbi(pci, pcie->pcie_cap_base +
> PCI_EXP_LNKSTA);
> val_16 &= ~PCI_EXP_LNKSTA_SLC;
> dw_pcie_writew_dbi(pci, pcie->pcie_cap_base + PCI_EXP_LNKSTA,
> val_16);
> }
> -
> clk_set_rate(pcie->core_clk, GEN4_CORE_CLK_FREQ);
>
> val = (ep->msi_mem_phys & MSIX_ADDR_MATCH_LOW_OFF_MASK);
> --
> 2.25.1
>
