PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro is used for IPQ8074
2_3_3 post_init ops. pcie slave addr size was initially set
to 0x358, but was wrongly changed to 0x168 as a part of
"PCI: qcom: Remove PCIE20_ prefix from register definitions"
Fixing it, by using the right macro PARF_SLV_ADDR_SPACE_SIZE
and removing the unused PARF_SLV_ADDR_SPACE_SIZE_2_3_3.
Without this pcie bring up on IPQ8074 is broken now.
Fixes: 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from register definitions")
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
---
[V2] Fixed the 'fixes tag' correctly, subject, right macro usage
drivers/pci/controller/dwc/pcie-qcom.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 4ab30892f6ef..1689d072fe86 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -43,7 +43,6 @@
#define PARF_PHY_REFCLK 0x4c
#define PARF_CONFIG_BITS 0x50
#define PARF_DBI_BASE_ADDR 0x168
-#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */
#define PARF_MHI_CLOCK_RESET_CTRL 0x174
#define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
#define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
@@ -811,7 +810,7 @@ static int qcom_pcie_post_init_2_3_3(struct qcom_pcie *pcie)
u32 val;
writel(SLV_ADDR_SPACE_SZ,
- pcie->parf + PARF_SLV_ADDR_SPACE_SIZE_2_3_3);
+ pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
val = readl(pcie->parf + PARF_PHY_CTRL);
val &= ~PHY_TEST_PWR_DOWN;
--
2.34.1
