[PATCH v2 6/8] PCI: microchip: Gather MSI information from hardware config registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>

The PCIe Root Complex on PolarFire SoC is configured at bitstream creation
time using Libero.  Key MSI-related parameters include the number of
MSIs (1/2/4/8/16/32) and the MSI address. In the device driver, extract
this information from hw registers at init time, and use it to configure
MSI system, including configuring MSI capability structure correctly in
configuration space.

This is backward compatible with all devices in the field.  All devices
report their MSI parameters.

Signed-off-by: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
 drivers/pci/controller/pcie-microchip-host.c | 40 +++++++++++++-------
 1 file changed, 27 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c
index 6b28442ffe5a..20ce21438a7e 100644
--- a/drivers/pci/controller/pcie-microchip-host.c
+++ b/drivers/pci/controller/pcie-microchip-host.c
@@ -20,8 +20,7 @@
 #include "../pci.h"
 
 /* Number of MSI IRQs */
-#define MC_NUM_MSI_IRQS				32
-#define MC_NUM_MSI_IRQS_CODED			5
+#define MC_MAX_NUM_MSI_IRQS			32
 
 /* PCIe Bridge Phy and Controller Phy offsets */
 #define MC_PCIE1_BRIDGE_ADDR			0x00008000u
@@ -31,6 +30,11 @@
 #define MC_PCIE_CTRL_ADDR			(MC_PCIE1_CTRL_ADDR)
 
 /* PCIe Bridge Phy Regs */
+#define PCIE_PCI_IRQ_DW0			0xa8
+#define  MSIX_CAP_MASK				BIT(31)
+#define  NUM_MSI_MSGS_MASK			GENMASK(6, 4)
+#define  NUM_MSI_MSGS_SHIFT			4
+
 #define IMASK_LOCAL				0x180
 #define  DMA_END_ENGINE_0_MASK			0x00000000u
 #define  DMA_END_ENGINE_0_SHIFT			0
@@ -79,7 +83,6 @@
 #define IMASK_HOST				0x188
 #define ISTATUS_HOST				0x18c
 #define IMSI_ADDR				0x190
-#define  MSI_ADDR				0x190
 #define ISTATUS_MSI				0x194
 
 /* PCIe Master table init defines */
@@ -158,8 +161,6 @@
 
 /* PCIe Config space MSI capability structure */
 #define MC_MSI_CAP_CTRL_OFFSET			0xe0u
-#define  MC_MSI_MAX_Q_AVAIL			(MC_NUM_MSI_IRQS_CODED << 1)
-#define  MC_MSI_Q_SIZE				(MC_NUM_MSI_IRQS_CODED << 4)
 
 /* Events */
 #define EVENT_PCIE_L2_EXIT			0
@@ -259,7 +260,7 @@ struct mc_msi {
 	struct irq_domain *dev_domain;
 	u32 num_vectors;
 	u64 vector_phy;
-	DECLARE_BITMAP(used, MC_NUM_MSI_IRQS);
+	DECLARE_BITMAP(used, MC_MAX_NUM_MSI_IRQS);
 };
 
 struct mc_pcie {
@@ -387,14 +388,14 @@ static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *base)
 	struct mc_msi *msi = &port->msi;
 	u32 cap_offset = MC_MSI_CAP_CTRL_OFFSET;
 	u16 msg_ctrl = readw_relaxed(base + cap_offset + PCI_MSI_FLAGS);
+	u8 queue_size;
 
 	msg_ctrl |= PCI_MSI_FLAGS_ENABLE;
-	msg_ctrl &= ~PCI_MSI_FLAGS_QMASK;
-	msg_ctrl |= MC_MSI_MAX_Q_AVAIL;
+	/* Fixup PCI MSI queue flags */
+	queue_size = msg_ctrl & PCI_MSI_FLAGS_QMASK;
+	queue_size >>= 1;
 	msg_ctrl &= ~PCI_MSI_FLAGS_QSIZE;
-	msg_ctrl |= MC_MSI_Q_SIZE;
-	msg_ctrl |= PCI_MSI_FLAGS_64BIT;
-
+	msg_ctrl |= queue_size << 4;
 	writew_relaxed(msg_ctrl, base + cap_offset + PCI_MSI_FLAGS);
 
 	writel_relaxed(lower_32_bits(msi->vector_phy),
@@ -1103,6 +1104,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
 	struct mc_pcie *port;
 	void __iomem *bridge_base_addr;
 	int ret;
+	u32 val;
 
 	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
 	if (!port)
@@ -1123,12 +1125,24 @@ static int mc_platform_init(struct pci_config_window *cfg)
 
 	bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
 
-	port->msi.vector_phy = MSI_ADDR;
-	port->msi.num_vectors = MC_NUM_MSI_IRQS;
+	/* Allow enabling MSI by disabling MSI-X */
+	val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
+	val &= ~MSIX_CAP_MASK;
+	writel(val, bridge_base_addr + PCIE_PCI_IRQ_DW0);
+
+	/* Pick num vectors from bitfile programmed onto FPGA fabric */
+	val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
+	val &= NUM_MSI_MSGS_MASK;
+	val >>= NUM_MSI_MSGS_SHIFT;
+
+	port->msi.num_vectors = 1 << val;
 
 	/* Hardware doesn't setup MSI by default */
 	mc_pcie_enable_msi(port, cfg->win);
 
+	/* Pick vector address from design */
+	port->msi.vector_phy = readl_relaxed(bridge_base_addr + IMSI_ADDR);
+
 	/* Configure Address Translation Table 0 for PCIe config space */
 	mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start & 0xffffffff,
 			     cfg->res.start, resource_size(&cfg->res));
-- 
2.25.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux