[PATCH v2 2/8] PCI: qcom-ep: Add support for D-state change notification

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support to pass D-state change notification to Endpoint
function driver.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom-ep.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 1435f51..e75aec4 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -561,6 +561,7 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
 	struct device *dev = pci->dev;
 	u32 status = readl_relaxed(pcie_ep->parf + PARF_INT_ALL_STATUS);
 	u32 mask = readl_relaxed(pcie_ep->parf + PARF_INT_ALL_MASK);
+	pci_power_t state;
 	u32 dstate, val;
 
 	writel_relaxed(status, pcie_ep->parf + PARF_INT_ALL_CLEAR);
@@ -583,11 +584,16 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
 		dstate = dw_pcie_readl_dbi(pci, DBI_CON_STATUS) &
 					   DBI_CON_STATUS_POWER_STATE_MASK;
 		dev_dbg(dev, "Received D%d state event\n", dstate);
+		state = dstate;
 		if (dstate == 3) {
 			val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL);
 			val |= PARF_PM_CTRL_REQ_EXIT_L1;
 			writel_relaxed(val, pcie_ep->parf + PARF_PM_CTRL);
+			state = PCI_D3hot;
+			if (gpiod_get_value(pcie_ep->reset))
+				state = PCI_D3cold;
 		}
+		pci_epc_dstate_change(pci->ep.epc, state);
 	} else if (FIELD_GET(PARF_INT_ALL_LINK_UP, status)) {
 		dev_dbg(dev, "Received Linkup event. Enumeration complete!\n");
 		dw_pcie_ep_linkup(&pci->ep);
-- 
2.7.4




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux