On Fri, Jun 23, 2023 at 03:04:42PM +0530, Sricharan Ramabadhran wrote:
> PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro used for IPQ8074
> pcie slave addr size was initially set to 0x358, but
> was wrongly changed to 0x168 as a part of
> 'PCI: qcom: Sort and group registers and bitfield definitions'
> Fixing it back to right value here.
>
> Without this pcie bring up on IPQ8074 is broken now.
>
> Fixes: 769e49d87b15 ("PCI: qcom: Sort and group registers and bitfield definitions")
769e49d87b15 appeared in v6.4-rc1, so ideally this would get merged
before v6.4 releases on Monday. I can try to do that, given an ack
from Manivannan.
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 4ab30892f6ef..59823beed13f 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -43,7 +43,7 @@
> #define PARF_PHY_REFCLK 0x4c
> #define PARF_CONFIG_BITS 0x50
> #define PARF_DBI_BASE_ADDR 0x168
> -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */
> +#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x358 /* Register offset specific to IP ver 2.3.3 */
> #define PARF_MHI_CLOCK_RESET_CTRL 0x174
> #define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
> #define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
> --
> 2.34.1
>
