On 6/21/23 11:51 AM, Smita Koralahalli wrote: > According to Section 6.7.6 of PCIe Base Specification [1], async removal > with DPC may result in surprise down error. This error is expected and > is just a side-effect of async remove. > > Add support to handle the surprise down error generated as a side-effect > of async remove. Typically, this error is benign as the pciehp handler > invoked by PDC or/and DLLSC alongside DPC, de-enumerates and brings down > the device appropriately. But the error messages might confuse users. Get > rid of these irritating log messages with a 1s delay while pciehp waits > for dpc recovery. > > The implementation is as follows: On an async remove a DPC is triggered > along with a Presence Detect State change and/or DLL State Change. > Determine it's an async remove by checking for DPC Trigger Status in DPC > Status Register and Surprise Down Error Status in AER Uncorrected Error > Status to be non-zero. If true, treat the DPC event as a side-effect of > async remove, clear the error status registers and continue with hot-plug > tear down routines. If not, follow the existing routine to handle AER and > DPC errors. > > Please note that, masking Surprise Down Errors was explored as an > alternative approach, but left due to the odd behavior that masking only > avoids the interrupt, but still records an error per PCIe r6.0.1 Section > 6.2.3.2.2. That stale error is going to be reported the next time some > error other than Surprise Down is handled. I think this fix is applicable to the EDR code path as well. > > Dmesg before: > > pcieport 0000:00:01.4: DPC: containment event, status:0x1f01 source:0x0000 > pcieport 0000:00:01.4: DPC: unmasked uncorrectable error detected > pcieport 0000:00:01.4: PCIe Bus Error: severity=Uncorrected (Fatal), type=Transaction Layer, (Receiver ID) > pcieport 0000:00:01.4: device [1022:14ab] error status/mask=00000020/04004000 > pcieport 0000:00:01.4: [ 5] SDES (First) > nvme nvme2: frozen state error detected, reset controller > pcieport 0000:00:01.4: DPC: Data Link Layer Link Active not set in 1000 msec > pcieport 0000:00:01.4: AER: subordinate device reset failed > pcieport 0000:00:01.4: AER: device recovery failed > pcieport 0000:00:01.4: pciehp: Slot(16): Link Down > nvme2n1: detected capacity change from 1953525168 to 0 > pci 0000:04:00.0: Removing from iommu group 49 > > Dmesg after: > > pcieport 0000:00:01.4: pciehp: Slot(16): Link Down > nvme1n1: detected capacity change from 1953525168 to 0 > pci 0000:04:00.0: Removing from iommu group 37 > > [1] PCI Express Base Specification Revision 6.0, Dec 16 2021. > https://members.pcisig.com/wg/PCI-SIG/document/16609 > > Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@xxxxxxx> > --- > v2: > Indentation is taken care. (Bjorn) > Unrelevant dmesg logs are removed. (Bjorn) > Rephrased commit message, to be clear on native vs FW-First > handling. (Bjorn and Sathyanarayanan) > Prefix changed from pciehp_ to dpc_. (Lukas) > Clearing ARI and AtomicOp Requester are performed as a part of > (de-)enumeration in pciehp_unconfigure_device(). (Lukas) > Changed to clearing all optional capabilities in DEVCTL2. > OS-First -> native. (Sathyanarayanan) > > v3: > Added error message when root port become inactive. > Modified commit description to add more details. > Rearranged code comments and function calls with no functional > change. > Additional check for is_hotplug_bridge. > dpc_completed_waitqueue to wakeup pciehp handler. > Cleared only Fatal error detected in DEVSTA. > --- > drivers/pci/pcie/dpc.c | 58 ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 58 insertions(+) > > diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c > index 3ceed8e3de41..5153ac8ea91c 100644 > --- a/drivers/pci/pcie/dpc.c > +++ b/drivers/pci/pcie/dpc.c > @@ -292,10 +292,68 @@ void dpc_process_error(struct pci_dev *pdev) > } > } > > +static void pci_clear_surpdn_errors(struct pci_dev *pdev) > +{ > + u16 reg16; > + u32 reg32; > + > + pci_read_config_dword(pdev, pdev->dpc_cap + PCI_EXP_DPC_RP_PIO_STATUS, ®32); > + pci_write_config_dword(pdev, pdev->dpc_cap + PCI_EXP_DPC_RP_PIO_STATUS, reg32); It is not clear why you want to clear it. > + > + pci_read_config_word(pdev, PCI_STATUS, ®16); > + pci_write_config_word(pdev, PCI_STATUS, reg16); Same as above. Can you add some comment about why you are clearing it? > + > + pcie_capability_write_word(pdev, PCI_EXP_DEVSTA, PCI_EXP_DEVSTA_FED); > +} > + > +static void dpc_handle_surprise_removal(struct pci_dev *pdev) > +{ > + if (pdev->dpc_rp_extensions && dpc_wait_rp_inactive(pdev)) { > + pci_err(pdev, "failed to retrieve DPC root port on async remove\n"); > + goto out; > + } > + > + pci_aer_raw_clear_status(pdev); > + pci_clear_surpdn_errors(pdev); > + > + pci_write_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_STATUS, > + PCI_EXP_DPC_STATUS_TRIGGER); Don't you need to wait for the link to go down? > + > +out: > + clear_bit(PCI_DPC_RECOVERED, &pdev->priv_flags); > + wake_up_all(&dpc_completed_waitqueue); > +} > + > +static bool dpc_is_surprise_removal(struct pci_dev *pdev) > +{ > + u16 status; > + > + pci_read_config_word(pdev, pdev->aer_cap + PCI_ERR_UNCOR_STATUS, &status); > + > + if (!pdev->is_hotplug_bridge) > + return false; > + > + if (!(status & PCI_ERR_UNC_SURPDN)) > + return false; > + > + return true; > +} > + > static irqreturn_t dpc_handler(int irq, void *context) > { > struct pci_dev *pdev = context; > > + /* > + * According to Section 6.7.6 of the PCIe Base Spec 6.0, since async > + * removal might be unexpected, errors might be reported as a side > + * effect of the event and software should handle them as an expected > + * part of this event. > + */ > + if (dpc_is_surprise_removal(pdev)) { > + dpc_handle_surprise_removal(pdev); > + return IRQ_HANDLED; > + } > + > dpc_process_error(pdev); > > /* We configure DPC so it only triggers on ERR_FATAL */ -- Sathyanarayanan Kuppuswamy Linux Kernel Developer
