Re: [PATCH] PCI:PM: Support platforms that do not implement ACPI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2023-06-09 at 19:58 +0200, Rafael J. Wysocki wrote:
>  	 
>  On Fri, Jun 9, 2023 at 1:49 PM Bjorn Helgaas <helgaas@xxxxxxxxxx>
> wrote:
> >
> > [+cc Rafael, linux-pm]
> >
> > On Fri, Jun 09, 2023 at 10:30:38AM +0800, Zhiren Chen wrote:
> > > From: Zhiren Chen <Zhiren.Chen@xxxxxxxxxxxx>
> > >
> > > The platform_pci_choose_state function and other low-level
> platform
> > > interfaces used by PCI power management processing did not take
> into
> > > account non-ACPI-supported platforms. This shortcoming can result
> in
> > > limitations and issues.
> > >
> > > For example, in embedded systems like smartphones, a PCI device
> can be
> > > shared by multiple processors for different purposes. The PCI
> device and
> > > some of the processors are controlled by Linux, while the rest of
> the
> > > processors runs its own operating system.
> > > When Linux initiates system-level sleep, if it does not consider
> the
> > > working state of the shared PCI device and forcefully sets the
> PCI device
> > > state to D3, it will affect the functionality of other processors
> that
> > > are currently using the PCI device.
> > >
> > > To address this problem, an interface should be created for PCI
> devices
> > > that don't support ACPI to enable accurate reporting of the power
> state
> > > during the PCI PM handling process.
> > >
> > > Signed-off-by: Zhiren Chen <Zhiren.Chen@xxxxxxxxxxxx>
> 
> Something like the pci_platform_pm_ops introduced here had been there
> for several years and the only users of it known to me were ACPI and
> Intel MID, which is why it was dropped.
> 
> I would like to see the platform code using these new callbacks in
> the
> first place.
> 
I think that more and more embedded products will use PCI devices to
achieve higher performance for data transfer, and these products may
not necessarily support ACPI.

When developing the Mediatek T8xx modem chip driver, I found that there
was no good way for T8xx to skip D3 setting in certain PM scenarios.

Best Regards,
Zhiren

> > > ---
> > >  drivers/pci/pci.c   | 24 ++++++++++++++++++++++++
> > >  drivers/pci/pci.h   | 40
> ++++++++++++++++++++++++++++++++++++++++
> > >  include/linux/pci.h |  1 +
> > >  3 files changed, 65 insertions(+)
> > >
> > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > > index 5ede93222bc1..9f03406f3081 100644
> > > --- a/drivers/pci/pci.c
> > > +++ b/drivers/pci/pci.c
> > > @@ -1014,6 +1014,9 @@ static void pci_restore_bars(struct pci_dev
> *dev)
> > >
> > >  static inline bool platform_pci_power_manageable(struct pci_dev
> *dev)
> > >  {
> > > +     if (dev->platform_pm_ops && dev->platform_pm_ops-
> >is_manageable)
> > > +             return dev->platform_pm_ops->is_manageable(dev);
> > > +
> > >       if (pci_use_mid_pm())
> > >               return true;
> > >
> > > @@ -1023,6 +1026,9 @@ static inline bool
> platform_pci_power_manageable(struct pci_dev *dev)
> > >  static inline int platform_pci_set_power_state(struct pci_dev
> *dev,
> > >                                              pci_power_t t)
> > >  {
> > > +     if (dev->platform_pm_ops && dev->platform_pm_ops-
> >set_state)
> > > +             return dev->platform_pm_ops->set_state(dev, t);
> > > +
> > >       if (pci_use_mid_pm())
> > >               return mid_pci_set_power_state(dev, t);
> > >
> > > @@ -1031,6 +1037,9 @@ static inline int
> platform_pci_set_power_state(struct pci_dev *dev,
> > >
> > >  static inline pci_power_t platform_pci_get_power_state(struct
> pci_dev *dev)
> > >  {
> > > +     if (dev->platform_pm_ops && dev->platform_pm_ops-
> >get_state)
> > > +             return dev->platform_pm_ops->get_state(dev);
> > > +
> > >       if (pci_use_mid_pm())
> > >               return mid_pci_get_power_state(dev);
> > >
> > > @@ -1039,12 +1048,18 @@ static inline pci_power_t
> platform_pci_get_power_state(struct pci_dev *dev)
> > >
> > >  static inline void platform_pci_refresh_power_state(struct
> pci_dev *dev)
> > >  {
> > > +     if (dev->platform_pm_ops && dev->platform_pm_ops-
> >refresh_state)
> > > +             dev->platform_pm_ops->refresh_state(dev);
> > > +
> > >       if (!pci_use_mid_pm())
> > >               acpi_pci_refresh_power_state(dev);
> > >  }
> > >
> > >  static inline pci_power_t platform_pci_choose_state(struct
> pci_dev *dev)
> > >  {
> > > +     if (dev->platform_pm_ops && dev->platform_pm_ops-
> >choose_state)
> > > +             return dev->platform_pm_ops->choose_state(dev);
> > > +
> > >       if (pci_use_mid_pm())
> > >               return PCI_POWER_ERROR;
> > >
> > > @@ -1053,6 +1068,9 @@ static inline pci_power_t
> platform_pci_choose_state(struct pci_dev *dev)
> > >
> > >  static inline int platform_pci_set_wakeup(struct pci_dev *dev,
> bool enable)
> > >  {
> > > +     if (dev->platform_pm_ops && dev->platform_pm_ops-
> >set_wakeup)
> > > +             return dev->platform_pm_ops->set_wakeup(dev,
> enable);
> > > +
> > >       if (pci_use_mid_pm())
> > >               return PCI_POWER_ERROR;
> > >
> > > @@ -1061,6 +1079,9 @@ static inline int
> platform_pci_set_wakeup(struct pci_dev *dev, bool enable)
> > >
> > >  static inline bool platform_pci_need_resume(struct pci_dev *dev)
> > >  {
> > > +     if (dev->platform_pm_ops && dev->platform_pm_ops-
> >need_resume)
> > > +             return dev->platform_pm_ops->need_resume(dev);
> > > +
> > >       if (pci_use_mid_pm())
> > >               return false;
> > >
> > > @@ -1069,6 +1090,9 @@ static inline bool
> platform_pci_need_resume(struct pci_dev *dev)
> > >
> > >  static inline bool platform_pci_bridge_d3(struct pci_dev *dev)
> > >  {
> > > +     if (dev->platform_pm_ops && dev->platform_pm_ops-
> >bridge_d3)
> > > +             return dev->platform_pm_ops->bridge_d3(dev);
> > > +
> > >       if (pci_use_mid_pm())
> > >               return false;
> > >
> > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> > > index 2475098f6518..85154470c083 100644
> > > --- a/drivers/pci/pci.h
> > > +++ b/drivers/pci/pci.h
> > > @@ -71,6 +71,42 @@ struct pci_cap_saved_state
> *pci_find_saved_ext_cap(struct pci_dev *dev,
> > >   */
> > >  #define PCI_RESET_WAIT               1000    /* msec */
> > >
> > > +/**
> > > + * struct pci_platform_pm_ops - Firmware PM callbacks
> > > + *
> > > + * @is_manageable: returns 'true' if given device is power
> manageable by the
> > > + *                 platform firmware
> > > + *
> > > + * @set_state: invokes the platform firmware to set the device's
> power state
> > > + *
> > > + * @get_state: queries the platform firmware for a device's
> current power state
> > > + *
> > > + * @choose_state: returns PCI power state of given device
> preferred by the
> > > + *                platform; to be used during system-wide
> transitions from a
> > > + *                sleeping state to the working state and vice
> versa
> > > + *
> > > + * @set_wakeup: enables/disables wakeup capability for the
> device
> > > + *
> > > + * @need_resume: returns 'true' if the given device (which is
> currently
> > > + *           suspended) needs to be resumed to be configured for
> system
> > > + *           wakeup.
> > > + *
> > > + * @bridge_d3: return 'true' if given device supoorts D3 when it
> is a bridge
> > > + *
> > > + * @refresh_state: refresh the given device's power state
> > > + *
> > > + */
> > > +struct pci_platform_pm_ops {
> > > +     bool (*is_manageable)(struct pci_dev *dev);
> > > +     int (*set_state)(struct pci_dev *dev, pci_power_t state);
> > > +     pci_power_t (*get_state)(struct pci_dev *dev);
> > > +     pci_power_t (*choose_state)(struct pci_dev *dev);
> > > +     int (*set_wakeup)(struct pci_dev *dev, bool enable);
> > > +     bool (*need_resume)(struct pci_dev *dev);
> > > +     bool (*bridge_d3)(struct pci_dev *dev);
> > > +     void (*refresh_state)(struct pci_dev *dev);
> > > +};
> > > +
> > >  void pci_update_current_state(struct pci_dev *dev, pci_power_t
> state);
> > >  void pci_refresh_power_state(struct pci_dev *dev);
> > >  int pci_power_up(struct pci_dev *dev);
> > > @@ -96,6 +132,10 @@ void pci_bridge_d3_update(struct pci_dev
> *dev);
> > >  void pci_bridge_reconfigure_ltr(struct pci_dev *dev);
> > >  int pci_bridge_wait_for_secondary_bus(struct pci_dev *dev, char
> *reset_type);
> > >
> > > +static inline void pci_set_platform_pm(struct pci_dev *dev,
> struct pci_platform_pm_ops *ops)
> > > +{
> > > +     dev->platform_pm_ops = ops;
> > > +}
> > >  static inline void pci_wakeup_event(struct pci_dev *dev)
> > >  {
> > >       /* Wait 100 ms before the system can be put into a sleep
> state. */
> > > diff --git a/include/linux/pci.h b/include/linux/pci.h
> > > index 60b8772b5bd4..a0171f1abf2f 100644
> > > --- a/include/linux/pci.h
> > > +++ b/include/linux/pci.h
> > > @@ -327,6 +327,7 @@ struct pci_dev {
> > >       void            *sysdata;       /* Hook for sys-specific
> extension */
> > >       struct proc_dir_entry *procent; /* Device entry in
> /proc/bus/pci */
> > >       struct pci_slot *slot;          /* Physical slot this
> device is in */
> > > +     struct pci_platform_pm_ops *platform_pm_ops;
> > >
> > >       unsigned int    devfn;          /* Encoded device &
> function index */
> > >       unsigned short  vendor;
> > > --
> > > 2.17.0
> > >




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux