Re: [PATCH v16 13/22] PCI: dwc: Add EDMA_UNROLL capability flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 10, 2023 at 03:22:25PM +0900, Yoshihiro Shimoda wrote:
> Renesas R-Car Gen4 PCIe controllers have an unexpected register value on
> the dbi+0x97b register. So, add a new capability flag "EDMA_UNROLL"
> which would force the unrolled eDMA mapping for the problematic
> device, 

> as suggested by Serge Semin.

Drop this. Suggested-by tag already means that.

> 
> Suggested-by: Serge Semin <fancer.lancer@xxxxxxxxx>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-designware.c | 8 +++++++-
>  drivers/pci/controller/dwc/pcie-designware.h | 5 +++--
>  2 files changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 8b2978c6eb23..e405bfae0191 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -881,8 +881,14 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
>  	 * Indirect eDMA CSRs access has been completely removed since v5.40a
>  	 * thus no space is now reserved for the eDMA channels viewport and
>  	 * former DMA CTRL register is no longer fixed to FFs.
> +	 *
> +	 * Note that Renesas R-Car S4-8's PCIe controllers for unknown reason

> +	 * may have zeros in the eDMA CTRL register even though the HW-manual

s/may have/have
(your comment is about a particular device which for sure has the
denoted problem.)

Other than that the change looks good. Thanks!
Reviewed-by: Serge Semin <fancer.lancer@xxxxxxxxx>

-Serge(y)

> +	 * explicitly states there must FFs if the unrolled mapping is enabled.
> +	 * For such cases the low-level drivers are supposed to manually
> +	 * activate the unrolled mapping to bypass the auto-detection procedure.
>  	 */
> -	if (dw_pcie_ver_is_ge(pci, 540A))
> +	if (dw_pcie_ver_is_ge(pci, 540A) || dw_pcie_cap_is(pci, EDMA_UNROLL))
>  		val = 0xFFFFFFFF;
>  	else
>  		val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 06e044e2163a..2639206b4c18 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -54,8 +54,9 @@
>  
>  /* DWC PCIe controller capabilities */
>  #define DW_PCIE_CAP_REQ_RES		0
> -#define DW_PCIE_CAP_IATU_UNROLL		1
> -#define DW_PCIE_CAP_CDM_CHECK		2
> +#define DW_PCIE_CAP_EDMA_UNROLL		1
> +#define DW_PCIE_CAP_IATU_UNROLL		2
> +#define DW_PCIE_CAP_CDM_CHECK		3
>  
>  #define dw_pcie_cap_is(_pci, _cap) \
>  	test_bit(DW_PCIE_CAP_ ## _cap, &(_pci)->caps)
> -- 
> 2.25.1
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux