As hotplug is not the only driver touching LNKCTL, use the pcie_lnkctl_clear_and_set() helper which handles concurrent changes correctly. Suggested-by: Lukas Wunner <lukas@xxxxxxxxx> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> --- drivers/pci/hotplug/pciehp_hpc.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index f8c70115b691..14ffbb27957c 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -332,17 +332,10 @@ int pciehp_check_link_status(struct controller *ctrl) static int __pciehp_link_set(struct controller *ctrl, bool enable) { struct pci_dev *pdev = ctrl_dev(ctrl); - u16 lnk_ctrl; - pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &lnk_ctrl); + pcie_lnkctl_clear_and_set(pdev, PCI_EXP_LNKCTL_LD, + !enable ? PCI_EXP_LNKCTL_LD : 0); - if (enable) - lnk_ctrl &= ~PCI_EXP_LNKCTL_LD; - else - lnk_ctrl |= PCI_EXP_LNKCTL_LD; - - pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, lnk_ctrl); - ctrl_dbg(ctrl, "%s: lnk_ctrl = %x\n", __func__, lnk_ctrl); return 0; } -- 2.30.2