RE: [PATCH v13 09/22] PCI: dwc: Add support for triggering INTx IRQs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Manivannan,

> From: Manivannan Sadhasivam, Sent: Saturday, April 22, 2023 8:39 PM
> 
> On Tue, Apr 18, 2023 at 09:23:50PM +0900, Yoshihiro Shimoda wrote:
> 
> It's good to add "endpoint drivers" in subject as below:
> 
> PCI: dwc: Add support for triggering INTx IRQs from endpoint drivers

Thank you for the suggestion! I'll change the subject.

> > Add support for triggering INTx IRQs by using outbound iATU.
> > Outbound iATU is utilized to send assert and de-assert INTx TLPs.
> > The message is generated based on the payloadless Msg TLP with type
> > 0x14, where 0x4 is the routing code implying the Terminate at
> > Receiver message. The message code is specified as b1000xx for
> > the INTx assertion and b1001xx for the INTx de-assertion.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > ---
> >  .../pci/controller/dwc/pcie-designware-ep.c   | 70 +++++++++++++++++--
> >  drivers/pci/controller/dwc/pcie-designware.h  |  2 +
> >  2 files changed, 68 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > index 96375b0aba82..304ed093f551 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > @@ -6,6 +6,7 @@
> >   * Author: Kishon Vijay Abraham I <kishon@xxxxxx>
> >   */
> >
> > +#include <linux/delay.h>
> >  #include <linux/of.h>
> >  #include <linux/platform_device.h>
> >
> > @@ -485,14 +486,62 @@ static const struct pci_epc_ops epc_ops = {
> >  	.get_features		= dw_pcie_ep_get_features,
> >  };
> >
> > +static int dw_pcie_ep_send_msg(struct dw_pcie_ep *ep, u8 func_no, u8 code,
> > +			       u8 routing)
> > +{
> > +	struct dw_pcie_outbound_atu atu = { 0 };
> > +	struct pci_epc *epc = ep->epc;
> > +	int ret;
> > +
> > +	atu.func_no = func_no;
> > +	atu.code = code;
> > +	atu.routing = routing;
> > +	atu.type = PCIE_ATU_TYPE_MSG;
> > +	atu.cpu_addr = ep->intx_mem_phys;
> > +	atu.size = epc->mem->window.page_size;
> 
> Newline here.

I got it.

> > +	ret = dw_pcie_ep_outbound_atu(ep, &atu);
> > +	if (ret)
> > +		return ret;
> > +
> > +	writel(0, ep->intx_mem);
> > +
> > +	dw_pcie_ep_unmap_addr(epc, func_no, 0, ep->intx_mem_phys);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no,
> > +					 int intx)
> > +{
> > +	int ret;
> > +
> > +	ret = dw_pcie_ep_send_msg(ep, func_no, PCI_CODE_ASSERT_INTA + intx,
> > +				  PCI_MSG_ROUTING_LOCAL);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/*
> > +	 * The documents of PCIe and the controller don't mention how long
> > +	 * the INTx should be asserted. If 10 usec, sometimes it failed.
> > +	 * So, asserted for 50 usec.
> > +	 */
> > +	usleep_range(50, 100);
> > +
> > +	return dw_pcie_ep_send_msg(ep, func_no, PCI_CODE_DEASSERT_INTA + intx,
> > +				   PCI_MSG_ROUTING_LOCAL);
> > +}
> > +
> >  int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no)
> >  {
> >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> >  	struct device *dev = pci->dev;
> >
> > -	dev_err(dev, "EP cannot trigger INTx IRQs\n");
> > +	if (!ep->intx_mem) {
> > +		dev_err(dev, "EP cannot trigger INTx IRQs\n");
> 
> INTx not supported.

I got it.

> > +		return -EINVAL;
> 
> -ENOTSUPP

I'll fix it on v13.

Best regards,
Yoshihiro Shimoda

> - Mani
> 
> > +	}
> >
> > -	return -EINVAL;
> > +	return __dw_pcie_ep_raise_intx_irq(ep, func_no, 0);
> >  }
> >  EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_intx_irq);
> >
> > @@ -623,6 +672,10 @@ void dw_pcie_ep_exit(struct dw_pcie_ep *ep)
> >
> >  	dw_pcie_edma_remove(pci);
> >
> > +	if (ep->intx_mem)
> > +		pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem,
> > +				      epc->mem->window.page_size);
> > +
> >  	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
> >  			      epc->mem->window.page_size);
> >
> > @@ -794,9 +847,14 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> >  		goto err_exit_epc_mem;
> >  	}
> >
> > +	ep->intx_mem = pci_epc_mem_alloc_addr(epc, &ep->intx_mem_phys,
> > +					      epc->mem->window.page_size);
> > +	if (!ep->intx_mem)
> > +		dev_warn(dev, "Failed to reserve memory for INTx\n");
> > +
> >  	ret = dw_pcie_edma_detect(pci);
> >  	if (ret)
> > -		goto err_free_epc_mem;
> > +		goto err_free_epc_mem_intx;
> >
> >  	if (ep->ops->get_features) {
> >  		epc_features = ep->ops->get_features(ep);
> > @@ -813,7 +871,11 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> >  err_remove_edma:
> >  	dw_pcie_edma_remove(pci);
> >
> > -err_free_epc_mem:
> > +err_free_epc_mem_intx:
> > +	if (ep->intx_mem)
> > +		pci_epc_mem_free_addr(epc, ep->intx_mem_phys, ep->intx_mem,
> > +				      epc->mem->window.page_size);
> > +
> >  	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
> >  			      epc->mem->window.page_size);
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > index 954d504890a1..8c08159ea08e 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -369,6 +369,8 @@ struct dw_pcie_ep {
> >  	unsigned long		*ob_window_map;
> >  	void __iomem		*msi_mem;
> >  	phys_addr_t		msi_mem_phys;
> > +	void __iomem		*intx_mem;
> > +	phys_addr_t		intx_mem_phys;
> >  	struct pci_epf_bar	*epf_bar[PCI_STD_NUM_BARS];
> >  };
> >
> > --
> > 2.25.1
> >
> 
> --
> மணிவண்ணன் சதாசிவம்




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux