Re: [PATCH v5 06/11] dt-bindings: PCI: Update the RK3399 example to a valid one

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/04/2023 11:26, Lorenzo Pieralisi wrote:
> On Wed, Apr 19, 2023 at 10:01:25PM +0200, Krzysztof Kozlowski wrote:
>> On 18/04/2023 09:46, Rick Wertenbroek wrote:
>>> Update the example in the documentation to a valid example.
>>> Address for mem-base was invalid, it pointed to address
>>> 0x8000'0000 which is the upper region of the DDR which
>>> is not necessarily populated depending on the board.
>>> This address should point to the base of the memory
>>> window region of the controller which is 0xfa00'0000.
>>> Add missing pinctrl.
>>>
>>> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@xxxxxxxxx>
>>> ---
>>>  .../devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml      | 4 +++-
>>>  1 file changed, 3 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
>>> index 88386a6d7011..6b62f6f58efe 100644
>>> --- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
>>> +++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
>>> @@ -47,7 +47,7 @@ examples:
>>>  
>>>          pcie-ep@f8000000 {
>>>              compatible = "rockchip,rk3399-pcie-ep";
>>> -            reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>;
>>> +            reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>;
>>>              reg-names = "apb-base", "mem-base";
>>>              clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
>>>                <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
>>> @@ -63,6 +63,8 @@ examples:
>>>              phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
>>>              phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
>>>              rockchip,max-outbound-regions = <16>;
>>> +            pinctrl-names = "default";
>>> +            pinctrl-0 = <&pcie_clkreqnb_cpm>;
>>
>> This is just example of the binding, you do not need to fill all
>> unrelated (generic) properties like pinctrl.
> 
> Should I merge it as-is ?

Yeah, go ahead. That was the note for the future that generic properties
are not always needed or even helpful in the example.

Best regards,
Krzysztof




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux