This series adds support for enabling the PCIe host devices (PCIe0, PCIe1, PCIe2, PCIe3) found on IPQ9574 platform. The PCIe0 & PCIe1 are 1-lane Gen3 host and PCIe2 & PCIe3 are 2-lane Gen3 host. DTS patch is based on the below series https://lore.kernel.org/linux-arm-msm/20230329053726.14860-1-quic_kathirav@xxxxxxxxxxx/ Changes in V3: - Dropped the phy driver and binding patches as they have been posted as a separate series. - Dropped the pinctrl binding fix patch as it is unrelated to the series dt-bindings: pinctrl: qcom: Add few missing functions. - Rebased on linux-next/master. - Detailed change logs are added to the respective patches. Changes in V2: https://lore.kernel.org/linux-arm-msm/20230404164828.8031-1-quic_devipriy@xxxxxxxxxxx/ - Reordered the patches and splitted the board DT changes into a separate patch as suggested - Detailed change logs are added to the respective patches [V1] https://lore.kernel.org/linux-arm-msm/20230214164135.17039-1-quic_devipriy@xxxxxxxxxxx/ Devi Priya (6): dt-bindings: clock: Add PCIe pipe clock definitions clk: qcom: gcc-ipq9574: Add PCIe pipe clocks dt-bindings: PCI: qcom: Add IPQ9574 arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes arm64: dts: qcom: ipq9574: Enable PCIe PHYs and controllers PCI: qcom: Add support for IPQ9574 .../devicetree/bindings/pci/qcom,pcie.yaml | 40 ++ arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 62 +++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 375 +++++++++++++++++- drivers/clk/qcom/gcc-ipq9574.c | 76 ++++ drivers/pci/controller/dwc/pcie-qcom.c | 61 ++- include/dt-bindings/clock/qcom,ipq9574-gcc.h | 4 + 6 files changed, 595 insertions(+), 23 deletions(-) base-commit: 44bf136283e567b2b62653be7630e7511da41da2 -- 2.17.1
