From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Sort Kconfig entries by vendor so they appear in alphabetical order in menuconfig. Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> --- drivers/pci/controller/Kconfig | 456 ++++++++++++++++----------------- 1 file changed, 228 insertions(+), 228 deletions(-) diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 7690cc7bbd3f..c52ca0c9550d 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -3,19 +3,6 @@ menu "PCI controller drivers" depends on PCI -config PCI_MVEBU - tristate "Marvell EBU PCIe controller" - depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST - depends on MVEBU_MBUS - depends on ARM - depends on OF - depends on BROKEN - select PCI_BRIDGE_EMUL - help - Add support for Marvell EBU PCIe controller. This PCIe controller - is used on 32-bit Marvell ARM SoCs: Dove, Kirkwood, Armada 370, - Armada XP, Armada 375, Armada 38x and Armada 39x. - config PCI_AARDVARK tristate "Aardvark PCIe controller" depends on (ARCH_MVEBU && ARM64) || COMPILE_TEST @@ -27,120 +14,54 @@ config PCI_AARDVARK controller is part of the South Bridge of the Marvel Armada 3700 SoC. -config PCIE_XILINX_NWL - bool "Xilinx NWL PCIe controller" - depends on ARCH_ZYNQMP || COMPILE_TEST +config PCIE_ALTERA + tristate "Altera PCIe controller" + depends on ARM || NIOS2 || ARM64 || COMPILE_TEST + help + Say Y here if you want to enable PCIe controller support on Altera + FPGA. + +config PCIE_ALTERA_MSI + tristate "Altera PCIe MSI feature" + depends on PCIE_ALTERA depends on PCI_MSI help - Say 'Y' here if you want kernel support for Xilinx - NWL PCIe controller. The controller can act as Root Port - or End Point. The current option selection will only - support root port enabling. + Say Y here if you want PCIe MSI support for the Altera FPGA. + This MSI driver supports Altera MSI to GIC controller IP. -config PCI_FTPCI100 - bool "Faraday Technology FTPCI100 PCI controller" +config PCIE_APPLE_MSI_DOORBELL_ADDR + hex + default 0xfffff000 + depends on PCIE_APPLE + +config PCIE_APPLE + tristate "Apple PCIe controller" + depends on ARCH_APPLE || COMPILE_TEST depends on OF - default ARCH_GEMINI - -config PCI_IXP4XX - bool "Intel IXP4xx PCI controller" - depends on ARM && OF - depends on ARCH_IXP4XX || COMPILE_TEST - default ARCH_IXP4XX - help - Say Y here if you want support for the PCI host controller found - in the Intel IXP4xx XScale-based network processor SoC. - -config PCI_TEGRA - bool "NVIDIA Tegra PCIe controller" - depends on ARCH_TEGRA || COMPILE_TEST depends on PCI_MSI - help - Say Y here if you want support for the PCIe host controller found - on NVIDIA Tegra SoCs. - -config PCI_RCAR_GEN2 - bool "Renesas R-Car Gen2 Internal PCI controller" - depends on ARCH_RENESAS || COMPILE_TEST - depends on ARM - help - Say Y here if you want internal PCI support on R-Car Gen2 SoC. - There are 3 internal PCI controllers available with a single - built-in EHCI/OHCI host controller present on each one. - -config PCIE_RCAR_HOST - bool "Renesas R-Car PCIe controller (host mode)" - depends on ARCH_RENESAS || COMPILE_TEST - depends on PCI_MSI - help - Say Y here if you want PCIe controller support on R-Car SoCs in host - mode. - -config PCIE_RCAR_EP - bool "Renesas R-Car PCIe controller (endpoint mode)" - depends on ARCH_RENESAS || COMPILE_TEST - depends on PCI_ENDPOINT - help - Say Y here if you want PCIe controller support on R-Car SoCs in - endpoint mode. - -config PCI_HOST_COMMON - tristate - select PCI_ECAM - -config PCI_HOST_GENERIC - tristate "Generic PCI host controller" - depends on OF - select PCI_HOST_COMMON - select IRQ_DOMAIN - help - Say Y here if you want to support a simple generic PCI host - controller, such as the one emulated by kvmtool. - -config PCIE_XILINX - bool "Xilinx AXI PCIe controller" - depends on OF || COMPILE_TEST - depends on PCI_MSI - help - Say 'Y' here if you want kernel to support the Xilinx AXI PCIe - Host Bridge driver. - -config PCIE_XILINX_CPM - bool "Xilinx Versal CPM PCI controller" - depends on ARCH_ZYNQMP || COMPILE_TEST select PCI_HOST_COMMON help - Say 'Y' here if you want kernel support for the - Xilinx Versal CPM host bridge. + Say Y here if you want to enable PCIe controller support on Apple + system-on-chips, like the Apple M1. This is required for the USB + type-A ports, Ethernet, Wi-Fi, and Bluetooth. -config PCI_XGENE - bool "X-Gene PCIe controller" - depends on ARM64 || COMPILE_TEST - depends on OF || (ACPI && PCI_QUIRKS) - help - Say Y here if you want internal PCI support on APM X-Gene SoC. - There are 5 internal PCIe ports available. Each port is GEN3 capable - and have varied lanes from x1 to x8. - -config PCI_XGENE_MSI - bool "X-Gene v1 PCIe MSI feature" - depends on PCI_XGENE - depends on PCI_MSI - default y - help - Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC. - This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC. - -config PCI_V3_SEMI - bool "V3 Semiconductor PCI controller" - depends on OF - depends on ARM || COMPILE_TEST - default ARCH_INTEGRATOR_AP + If unsure, say Y if you have an Apple Silicon system. config PCI_VERSATILE bool "ARM Versatile PB PCI controller" depends on ARCH_VERSATILE || COMPILE_TEST +config PCIE_BRCMSTB + tristate "Broadcom Brcmstb PCIe controller" + depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \ + BMIPS_GENERIC || COMPILE_TEST + depends on OF + depends on PCI_MSI + default ARCH_BRCMSTB || BMIPS_GENERIC + help + Say Y here to enable PCIe host controller support for + Broadcom STB based SoCs, like the Raspberry Pi 4. + config PCIE_IPROC tristate help @@ -177,21 +98,6 @@ config PCIE_IPROC_MSI Say Y here if you want to enable MSI support for Broadcom's iProc PCIe controller -config PCIE_ALTERA - tristate "Altera PCIe controller" - depends on ARM || NIOS2 || ARM64 || COMPILE_TEST - help - Say Y here if you want to enable PCIe controller support on Altera - FPGA. - -config PCIE_ALTERA_MSI - tristate "Altera PCIe MSI feature" - depends on PCIE_ALTERA - depends on PCI_MSI - help - Say Y here if you want PCIe MSI support for the Altera FPGA. - This MSI driver supports Altera MSI to GIC controller IP. - config PCI_HOST_THUNDER_PEM bool "Cavium Thunder PCIe controller to off-chip devices" depends on ARM64 || COMPILE_TEST @@ -208,6 +114,157 @@ config PCI_HOST_THUNDER_ECAM help Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs. +config PCI_FTPCI100 + bool "Faraday Technology FTPCI100 PCI controller" + depends on OF + default ARCH_GEMINI + +config PCI_HOST_COMMON + tristate + select PCI_ECAM + +config PCI_HOST_GENERIC + tristate "Generic PCI host controller" + depends on OF + select PCI_HOST_COMMON + select IRQ_DOMAIN + help + Say Y here if you want to support a simple generic PCI host + controller, such as the one emulated by kvmtool. + +config PCIE_HISI_ERR + depends on ACPI_APEI_GHES && (ARM64 || COMPILE_TEST) + bool "HiSilicon HIP PCIe controller error handling driver" + help + Say Y here if you want error handling support + for the PCIe controller's errors on HiSilicon HIP SoCs + +config PCI_IXP4XX + bool "Intel IXP4xx PCI controller" + depends on ARM && OF + depends on ARCH_IXP4XX || COMPILE_TEST + default ARCH_IXP4XX + help + Say Y here if you want support for the PCI host controller found + in the Intel IXP4xx XScale-based network processor SoC. + +config VMD + depends on PCI_MSI && X86_64 && !UML + tristate "Intel Volume Management Device Driver" + help + Adds support for the Intel Volume Management Device (VMD). VMD is a + secondary PCI host bridge that allows PCI Express root ports, + and devices attached to them, to be removed from the default + PCI domain and placed within the VMD domain. This provides + more bus resources than are otherwise possible with a + single domain. If you know your system provides one of these and + has devices attached to it, say Y; if you are not sure, say N. + + To compile this driver as a module, choose M here: the + module will be called vmd. + +config PCI_LOONGSON + bool "LOONGSON PCIe controller" + depends on MACH_LOONGSON64 || COMPILE_TEST + depends on OF || ACPI + depends on PCI_QUIRKS + default MACH_LOONGSON64 + help + Say Y here if you want to enable PCI controller support on + Loongson systems. + +config PCI_MVEBU + tristate "Marvell EBU PCIe controller" + depends on ARCH_MVEBU || ARCH_DOVE || COMPILE_TEST + depends on MVEBU_MBUS + depends on ARM + depends on OF + depends on BROKEN + select PCI_BRIDGE_EMUL + help + Add support for Marvell EBU PCIe controller. This PCIe controller + is used on 32-bit Marvell ARM SoCs: Dove, Kirkwood, Armada 370, + Armada XP, Armada 375, Armada 38x and Armada 39x. + +config PCIE_MEDIATEK + tristate "MediaTek PCIe controller" + depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST + depends on OF + depends on PCI_MSI + help + Say Y here if you want to enable PCIe controller support on + MediaTek SoCs. + +config PCIE_MEDIATEK_GEN3 + tristate "MediaTek Gen3 PCIe controller" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on PCI_MSI + help + Adds support for PCIe Gen3 MAC controller for MediaTek SoCs. + This PCIe controller is compatible with Gen3, Gen2 and Gen1 speed, + and support up to 256 MSI interrupt numbers for + multi-function devices. + + Say Y here if you want to enable Gen3 PCIe controller support on + MediaTek SoCs. + +config PCIE_MT7621 + tristate "MediaTek MT7621 PCIe controller" + depends on SOC_MT7621 || COMPILE_TEST + select PHY_MT7621_PCI + default SOC_MT7621 + help + This selects a driver for the MediaTek MT7621 PCIe Controller. + +config PCIE_MICROCHIP_HOST + bool "Microchip AXI PCIe controller" + depends on PCI_MSI && OF + select PCI_HOST_COMMON + help + Say Y here if you want kernel to support the Microchip AXI PCIe + Host Bridge driver. + +config PCI_HYPERV_INTERFACE + tristate "Microsoft Hyper-V PCI Interface" + depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI + help + The Hyper-V PCI Interface is a helper driver that allows other + drivers to have a common interface with the Hyper-V PCI frontend + driver. + +config PCI_TEGRA + bool "NVIDIA Tegra PCIe controller" + depends on ARCH_TEGRA || COMPILE_TEST + depends on PCI_MSI + help + Say Y here if you want support for the PCIe host controller found + on NVIDIA Tegra SoCs. + +config PCIE_RCAR_HOST + bool "Renesas R-Car PCIe controller (host mode)" + depends on ARCH_RENESAS || COMPILE_TEST + depends on PCI_MSI + help + Say Y here if you want PCIe controller support on R-Car SoCs in host + mode. + +config PCIE_RCAR_EP + bool "Renesas R-Car PCIe controller (endpoint mode)" + depends on ARCH_RENESAS || COMPILE_TEST + depends on PCI_ENDPOINT + help + Say Y here if you want PCIe controller support on R-Car SoCs in + endpoint mode. + +config PCI_RCAR_GEN2 + bool "Renesas R-Car Gen2 Internal PCI controller" + depends on ARCH_RENESAS || COMPILE_TEST + depends on ARM + help + Say Y here if you want internal PCI support on R-Car Gen2 SoC. + There are 3 internal PCI controllers available with a single + built-in EHCI/OHCI host controller present on each one. + config PCIE_ROCKCHIP bool depends on PCI @@ -236,114 +293,57 @@ config PCIE_ROCKCHIP_EP endpoint mode on Rockchip SoC. There is 1 internal PCIe port available to support GEN2 with 4 slots. -config PCIE_MEDIATEK - tristate "MediaTek PCIe controller" - depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST +config PCI_V3_SEMI + bool "V3 Semiconductor PCI controller" depends on OF + depends on ARM || COMPILE_TEST + default ARCH_INTEGRATOR_AP + +config PCI_XGENE + bool "X-Gene PCIe controller" + depends on ARM64 || COMPILE_TEST + depends on OF || (ACPI && PCI_QUIRKS) + help + Say Y here if you want internal PCI support on APM X-Gene SoC. + There are 5 internal PCIe ports available. Each port is GEN3 capable + and have varied lanes from x1 to x8. + +config PCI_XGENE_MSI + bool "X-Gene v1 PCIe MSI feature" + depends on PCI_XGENE + depends on PCI_MSI + default y + help + Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC. + This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC. + +config PCIE_XILINX + bool "Xilinx AXI PCIe controller" + depends on OF || COMPILE_TEST depends on PCI_MSI help - Say Y here if you want to enable PCIe controller support on - MediaTek SoCs. - -config PCIE_MEDIATEK_GEN3 - tristate "MediaTek Gen3 PCIe controller" - depends on ARCH_MEDIATEK || COMPILE_TEST - depends on PCI_MSI - help - Adds support for PCIe Gen3 MAC controller for MediaTek SoCs. - This PCIe controller is compatible with Gen3, Gen2 and Gen1 speed, - and support up to 256 MSI interrupt numbers for - multi-function devices. - - Say Y here if you want to enable Gen3 PCIe controller support on - MediaTek SoCs. - -config VMD - depends on PCI_MSI && X86_64 && !UML - tristate "Intel Volume Management Device Driver" - help - Adds support for the Intel Volume Management Device (VMD). VMD is a - secondary PCI host bridge that allows PCI Express root ports, - and devices attached to them, to be removed from the default - PCI domain and placed within the VMD domain. This provides - more bus resources than are otherwise possible with a - single domain. If you know your system provides one of these and - has devices attached to it, say Y; if you are not sure, say N. - - To compile this driver as a module, choose M here: the - module will be called vmd. - -config PCIE_BRCMSTB - tristate "Broadcom Brcmstb PCIe controller" - depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCMBCA || \ - BMIPS_GENERIC || COMPILE_TEST - depends on OF - depends on PCI_MSI - default ARCH_BRCMSTB || BMIPS_GENERIC - help - Say Y here to enable PCIe host controller support for - Broadcom STB based SoCs, like the Raspberry Pi 4. - -config PCI_HYPERV_INTERFACE - tristate "Microsoft Hyper-V PCI Interface" - depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI - help - The Hyper-V PCI Interface is a helper driver that allows other - drivers to have a common interface with the Hyper-V PCI frontend - driver. - -config PCI_LOONGSON - bool "LOONGSON PCIe controller" - depends on MACH_LOONGSON64 || COMPILE_TEST - depends on OF || ACPI - depends on PCI_QUIRKS - default MACH_LOONGSON64 - help - Say Y here if you want to enable PCI controller support on - Loongson systems. - -config PCIE_MICROCHIP_HOST - bool "Microchip AXI PCIe controller" - depends on PCI_MSI && OF - select PCI_HOST_COMMON - help - Say Y here if you want kernel to support the Microchip AXI PCIe + Say 'Y' here if you want kernel to support the Xilinx AXI PCIe Host Bridge driver. -config PCIE_HISI_ERR - depends on ACPI_APEI_GHES && (ARM64 || COMPILE_TEST) - bool "HiSilicon HIP PCIe controller error handling driver" - help - Say Y here if you want error handling support - for the PCIe controller's errors on HiSilicon HIP SoCs - -config PCIE_APPLE_MSI_DOORBELL_ADDR - hex - default 0xfffff000 - depends on PCIE_APPLE - -config PCIE_APPLE - tristate "Apple PCIe controller" - depends on ARCH_APPLE || COMPILE_TEST - depends on OF +config PCIE_XILINX_NWL + bool "Xilinx NWL PCIe controller" + depends on ARCH_ZYNQMP || COMPILE_TEST depends on PCI_MSI + help + Say 'Y' here if you want kernel support for Xilinx + NWL PCIe controller. The controller can act as Root Port + or End Point. The current option selection will only + support root port enabling. + +config PCIE_XILINX_CPM + bool "Xilinx Versal CPM PCI controller" + depends on ARCH_ZYNQMP || COMPILE_TEST select PCI_HOST_COMMON help - Say Y here if you want to enable PCIe controller support on Apple - system-on-chips, like the Apple M1. This is required for the USB - type-A ports, Ethernet, Wi-Fi, and Bluetooth. - - If unsure, say Y if you have an Apple Silicon system. - -config PCIE_MT7621 - tristate "MediaTek MT7621 PCIe controller" - depends on SOC_MT7621 || COMPILE_TEST - select PHY_MT7621_PCI - default SOC_MT7621 - help - This selects a driver for the MediaTek MT7621 PCIe Controller. + Say 'Y' here if you want kernel support for the + Xilinx Versal CPM host bridge. +source "drivers/pci/controller/cadence/Kconfig" source "drivers/pci/controller/dwc/Kconfig" source "drivers/pci/controller/mobiveil/Kconfig" -source "drivers/pci/controller/cadence/Kconfig" endmenu -- 2.25.1
