On Mon, 17 Apr 2023 16:02:25 +0530, Thippeswamy Havalige wrote: > Add YAML dtschemas of Xilinx XDMA Soft IP PCIe Root Port Bridge > dt binding. > > Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx> > Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xxxxxxx> > --- > .../bindings/pci/xlnx,xdma-host.yaml | 117 ++++++++++++++++++ > 1 file changed, 117 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/xlnx,xdma-host.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/pci/xlnx,xdma-host.example.dtb: /example-0/soc/pcie@a0000000: failed to match any schema with compatible: ['xlnx,xdma-host-3.00'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230417103226.334588-2-thippeswamy.havalige@xxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.