Florian Fainelli <f.fainelli@xxxxxxxxx> (2023-04-14):
> Cyril, based upon the table and logs you provided whereby you have used the
> following:
>
> - Raspberry Pi Compute Module 4 (Rev 1.0, 8G RAM, 32G storage)
> - Raspberry Pi Compute Module 4 IO Board
> - SupaHub PCIe-to-multiple-USB adapter, reference PCE6U1C-R02, VER 006S
>
> in the before/unpatched case we have a PCIe link down and in the
> after/patched we have a PCIe link up but a kernel panic. Neither are great
> nor resulting in a fully functional PCIe device.
Based on Jim's feedback, I'm attaching a new dmesg for the aforementioned
setup, with an unpatched kernel (dmesg-unpatched-pcie-link-up.txt).
I fear that initially I might have not waited enough before power off and
power on when replugging the SupaHub adapter, and I've only seen the PCIe
link down a few times (now that I'm actively paying attention to that
part). I'm indeed seeing PCIe link up consistently (100%) when using the
following method:
for i in $(seq 1 20); do
# power on, let the system boot up and settle:
sispmctl -t 4; sleep 2m
ssh cm4 sh -c "dmesg > dmesg-$i.txt; poweroff"
# let the system power down, and power off:
sleep 30; sispmctl -t 4
# wait before power cycling:
sleep 10
done
> Looking at:
> https://www.amazon.co.uk/SupaHub-Express-BandWidth-Capable-Expanding/dp/B092ZQWG5B
>
> it would appear that it can accept an external power supply, do you have one
> connected to that USB expansion card by any chance?
With the patched kernel, I have tried several things (leaving the regular
12V adapter plugged in all the time):
- No external power supply (that's what I've been using in all previous
attempts).
- Using a 5V PSU with 2 pins (ground and 5V) plugged on the Ext PSU
4-pin header on the IO Board.
- Using a 5V PSU with a SATA connector plugged directly onto the SupaHub
adapter.
I'm getting the same trace in all cases.
> Are you able to boot the kernel before/after if you disconnect any USB
> peripheral?
The trace is obtained without any USB peripheral (on the extension card or
on the onboard USB slots). Besides the SupaHub adapter on the PCIe slot, I
only have Ethernet and HDMI plugged in (I'm getting traces via serial
console, and operating the system over SSH when it boots fine).
As soon as I unplug the SupaHub board itself, the system boots fine.
> Does that SupaHub board plugged to the CM4 1.0 system work fine in the
> Raspberry Pi kernel tree?
With the Raspberry Pi OS (64-bit) > Raspberry Pi OS Lite image
(2023-02-21-raspios-bullseye-arm64-lite.img.xz), the system at least
boots fine; I haven't tried adding devices to the mix just yet, trying
to stick with that particular setup.
A full dmesg is attached (dmesg-raspios.txt).
Cheers,
--
Cyril Brulebois (kibi@xxxxxxxxxx) <https://debamax.com/>
D-I release manager -- Release team member -- Freelance Consultant
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.3.0-rc6+ (kibi@genova) (aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Thu Apr 13 20:03:01 CEST 2023
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000037400000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000037400000..0x000000003b3fffff (65536 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x000000003ef625a0..0x000000003ef626d0 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] earlycon: bcm2835aux0 at MMIO32 0x00000000fe215040 (options '115200n8')
[ 0.000000] printk: bootconsole [bcm2835aux0] enabled
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x1ff00c280-0x1ff00efff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges
[ 0.000000] percpu: Embedded 31 pages/cpu s88232 r8192 d30552 u126976
[ 0.000000] pcpu-alloc: s88232 r8192 d30552 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 dma.dmachans=0x37f5 bcm2709.boardrev=0xd03140 bcm2709.serial=0x751d0632 bcm2709.uart_clock=48000000 smsc95xx.macaddr=E4:5F:01:4D:5F:D7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS1,115200 root=LABEL=RASPIROOT rw fsck.repair=yes net.ifnames=0 rootwait earlycon
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000033400000-0x0000000037400000] (64MB)
[ 0.000000] Memory: 3987300K/8245248K available (13440K kernel code, 2774K rwdata, 8248K rodata, 6528K init, 607K bss, 290288K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 43928 entries in 172 pages
[ 0.000000] ftrace: allocated 172 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.008293] Console: colour dummy device 80x25
[ 0.012831] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.023383] pid_max: default: 32768 minimum: 301
[ 0.028104] LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,apparmor,tomoyo,bpf
[ 0.037094] landlock: Up and running.
[ 0.040785] Yama: becoming mindful.
[ 0.044391] AppArmor: AppArmor initialized
[ 0.048529] TOMOYO Linux initialized
[ 0.052150] LSM support for eBPF active
[ 0.056115] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.063811] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.073125] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.080449] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.086656] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.092943] rcu: Hierarchical SRCU implementation.
[ 0.097782] rcu: Max phase no-delay instances is 1000.
[ 0.104118] EFI services will not be available.
[ 0.109030] smp: Bringing up secondary CPUs ...
[ 0.113978] Detected PIPT I-cache on CPU1
[ 0.114047] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.114421] Detected PIPT I-cache on CPU2
[ 0.114457] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.114822] Detected PIPT I-cache on CPU3
[ 0.114857] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.114898] smp: Brought up 1 node, 4 CPUs
[ 0.150939] SMP: Total of 4 processors activated.
[ 0.155688] CPU features: detected: 32-bit EL0 Support
[ 0.160873] CPU features: detected: 32-bit EL1 Support
[ 0.166062] CPU features: detected: CRC32 instructions
[ 0.171305] CPU: All CPU(s) started at EL2
[ 0.175448] alternatives: applying system-wide alternatives
[ 0.258167] node 0 deferred pages initialised in 76ms
[ 0.264630] devtmpfs: initialized
[ 0.273248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.283148] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.291457] pinctrl core: initialized pinctrl subsystem
[ 0.297614] DMI not present or invalid.
[ 0.301833] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.309143] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.316833] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.325692] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.333817] audit: initializing netlink subsys (disabled)
[ 0.339412] audit: type=2000 audit(0.244:1): state=initialized audit_enabled=0 res=1
[ 0.339957] thermal_sys: Registered thermal governor 'fair_share'
[ 0.347244] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.353398] thermal_sys: Registered thermal governor 'step_wise'
[ 0.359463] thermal_sys: Registered thermal governor 'user_space'
[ 0.365528] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.371707] cpuidle: using governor ladder
[ 0.382439] cpuidle: using governor menu
[ 0.386517] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.393433] ASID allocator initialised with 32768 entries
[ 0.399130] Serial: AMBA PL011 UART driver
[ 0.410262] KASLR enabled
[ 0.413665] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.420530] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.426862] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.433717] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.440046] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.446900] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.453229] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.460083] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.467546] ACPI: Interpreter disabled.
[ 0.471664] iommu: Default domain type: Translated
[ 0.476593] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.483082] EDAC MC: Ver: 3.0.0
[ 0.486519] scmi_core: SCMI protocol bus registered
[ 0.492029] NetLabel: Initializing
[ 0.495466] NetLabel: domain hash size = 128
[ 0.499863] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.505611] NetLabel: unlabeled traffic allowed by default
[ 0.511374] vgaarb: loaded
[ 0.514332] clocksource: Switched to clocksource arch_sys_counter
[ 0.549785] VFS: Disk quotas dquot_6.6.0
[ 0.553806] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.561228] AppArmor: AppArmor Filesystem Enabled
[ 0.566034] pnp: PnP ACPI: disabled
[ 0.573512] NET: Registered PF_INET protocol family
[ 0.578927] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.590470] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.599270] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.607308] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.616322] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.626439] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.633407] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[ 0.641344] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.648308] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.655786] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.661535] NET: Registered PF_XDP protocol family
[ 0.666384] PCI: CLS 0 bytes, default 64
[ 0.670609] Trying to unpack rootfs image as initramfs...
[ 0.676170] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.684669] kvm [1]: IPA Size Limit: 44 bits
[ 0.690004] kvm [1]: vgic interrupt IRQ9
[ 0.694037] kvm [1]: Hyp mode initialized successfully
[ 0.700409] Initialise system trusted keyrings
[ 0.704985] Key type blacklist registered
[ 0.709327] workingset: timestamp_bits=42 max_order=21 bucket_order=0
[ 0.716008] zbud: loaded
[ 0.719171] integrity: Platform Keyring initialized
[ 0.724197] integrity: Machine keyring initialized
[ 0.729077] Key type asymmetric registered
[ 0.733224] Asymmetric key parser 'x509' registered
[ 1.675267] Freeing initrd memory: 31880K
[ 1.692974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.700551] io scheduler mq-deadline registered
[ 1.707175] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 18)
[ 1.720146] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.727354] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.734395] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.743554] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x0603ffffff -> 0x00f8000000
[ 1.751740] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000
[ 1.760548] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.766887] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.772430] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[ 1.782907] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.789018] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.904371] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.910823] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
[ 1.916913] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 1.923886] pci 0000:01:00.0: PME# supported from D0 D3hot
[ 1.938371] pci 0000:00:00.0: BAR 14: assigned [mem 0x600000000-0x6000fffff]
[ 1.945500] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit]
[ 1.953074] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.958095] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.965230] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.971458] pcieport 0000:00:00.0: PME: Signaling with IRQ 23
[ 1.977465] pcieport 0000:00:00.0: AER: enabled with IRQ 23
[ 1.983179] pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 6.988927] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801
[ 6.996862] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x968 took 4896177 usecs
[ 7.005184] simple-framebuffer 3e4e0000.framebuffer: framebuffer at 0x3e4e0000, 0x6e7000 bytes
[ 7.013892] simple-framebuffer 3e4e0000.framebuffer: format=a8r8g8b8, mode=1824x984x32, linelength=7296
[ 7.026754] Console: switching to colour frame buffer device 228x61
[ 7.036135] simple-framebuffer 3e4e0000.framebuffer: fb0: simplefb registered!
[ 7.048696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 7.056025] printk: console [ttyS1] disabled
[ 7.060403] fe215040.serial: ttyS1 at MMIO 0xfe215040 (irq = 31, base_baud = 62499999) is a 16550
[ 7.069404] printk: console [ttyS1] enabled
[ 7.077886] printk: bootconsole [bcm2835aux0] disabled
[ 7.088802] Serial: AMBA driver
[ 7.092199] msm_serial: driver initialized
[ 7.097592] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 7.105367] mousedev: PS/2 mouse device common for all mice
[ 7.111592] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 7.118682] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 7.126399] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.133020] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 7.156951] NET: Registered PF_INET6 protocol family
[ 7.174534] Segment Routing with IPv6
[ 7.178286] In-situ OAM (IOAM) with IPv6
[ 7.182323] mip6: Mobile IPv6
[ 7.185345] NET: Registered PF_PACKET protocol family
[ 7.190549] mpls_gso: MPLS GSO support
[ 7.197394] registered taskstats version 1
[ 7.201792] Loading compiled-in X.509 certificates
[ 7.244632] Loaded X.509 cert 'Build time autogenerated kernel key: 83983db0a2e3422ed1c09ac9326e286f87dd9c0e'
[ 7.256299] zswap: loaded using pool lzo/zbud
[ 7.264462] Key type .fscrypt registered
[ 7.268454] Key type fscrypt-provisioning registered
[ 7.285473] Key type encrypted registered
[ 7.289560] AppArmor: AppArmor sha1 policy hashing enabled
[ 7.295146] ima: No TPM chip found, activating TPM-bypass!
[ 7.300722] ima: Allocated hash algorithm: sha256
[ 7.305517] ima: No architecture policies found
[ 7.310133] evm: Initialising EVM extended attributes:
[ 7.315340] evm: security.selinux
[ 7.318697] evm: security.SMACK64 (disabled)
[ 7.323022] evm: security.SMACK64EXEC (disabled)
[ 7.327699] evm: security.SMACK64TRANSMUTE (disabled)
[ 7.332818] evm: security.SMACK64MMAP (disabled)
[ 7.337495] evm: security.apparmor
[ 7.340939] evm: security.ima
[ 7.343942] evm: security.capability
[ 7.347562] evm: HMAC attrs: 0x1
[ 7.556359] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 33, base_baud = 0) is a PL011 rev2
[ 7.565687] serial serial0: tty port ttyAMA0 registered
[ 7.571649] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-08-26T14:03:16
[ 7.581835] gpio-573 (ant1): hogged as output/high
[ 7.587958] gpio-577 (ant2): hogged as output/low
[ 7.605203] Freeing unused kernel memory: 6528K
[ 7.660804] Checked W+X mappings: passed, no W+X pages found
[ 7.666581] Run /init as init process
[ 7.670288] with arguments:
[ 7.670292] /init
[ 7.670295] with environment:
[ 7.670298] HOME=/
[ 7.670301] TERM=linux
[ 7.940360] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 7.957146] sdhci: Secure Digital Host Controller Interface driver
[ 7.963452] sdhci: Copyright(c) Pierre Ossman
[ 7.972361] usbcore: registered new interface driver usbfs
[ 7.981134] usbcore: registered new interface driver hub
[ 7.988461] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 7.988739] usbcore: registered new device driver usb
[ 7.989085] sdhci-pltfm: SDHCI platform and OF driver helper
[ 8.002036] sdhci-iproc fe300000.mmc: allocated mmc-pwrseq
[ 8.039280] pps_core: LinuxPPS API ver. 1 registered
[ 8.042379] mmc1: SDHCI controller on fe300000.mmc [fe300000.mmc] using PIO
[ 8.044401] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 8.051555] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 8.072286] PTP clock support registered
[ 8.113638] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[ 8.121016] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[ 8.180510] dwc2 fe980000.usb: DWC OTG Controller
[ 8.185300] dwc2 fe980000.usb: new USB bus registered, assigned bus number 1
[ 8.192464] dwc2 fe980000.usb: irq 38, io mem 0xfe980000
[ 8.197962] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[ 8.206351] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.210412] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 8.213675] usb usb1: Product: DWC OTG Controller
[ 8.224619] usb usb1: Manufacturer: Linux 6.3.0-rc6+ dwc2_hsotg
[ 8.230624] usb usb1: SerialNumber: fe980000.usb
[ 8.235979] hub 1-0:1.0: USB hub found
[ 8.239821] hub 1-0:1.0: 1 port detected
[ 8.542339] usb 1-1: new high-speed USB device number 2 using dwc2
[ 8.754442] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
[ 8.762741] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.770307] hub 1-1:1.0: USB hub found
[ 8.774175] hub 1-1:1.0: 4 ports detected
[ 9.822715] xhci_hcd 0000:01:00.0: Timeout for Set DATAX step: 34
[ 9.828909] xhci_hcd 0000:01:00.0: ROM Download Step 34 failed at position 136 bytes with (-110)
[ 10.188426] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 10.193749] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 10.199301] mmc0: new HS200 MMC card at address 0001
[ 10.207166] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB
[ 10.213627] mmcblk0: p1 p2
[ 10.217291] mmcblk0boot0: mmc0:0001 BJTD4R 4.00 MiB
[ 10.225007] mmcblk0boot1: mmc0:0001 BJTD4R 4.00 MiB
[ 10.232142] mmcblk0rpmb: mmc0:0001 BJTD4R 4.00 MiB, chardev (241:0)
[ 10.315008] xhci_hcd 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000410
[ 10.324800] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 10.330118] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
[ 10.337628] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 10.344165] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[ 10.352553] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.359932] usb usb2: Product: xHCI Host Controller
[ 10.364877] usb usb2: Manufacturer: Linux 6.3.0-rc6+ xhci-hcd
[ 10.370703] usb usb2: SerialNumber: 0000:01:00.0
[ 10.375841] hub 2-0:1.0: USB hub found
[ 10.379725] hub 2-0:1.0: 4 ports detected
[ 10.384226] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 10.392500] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[ 10.400886] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.408216] usb usb3: Product: xHCI Host Controller
[ 10.413161] usb usb3: Manufacturer: Linux 6.3.0-rc6+ xhci-hcd
[ 10.418988] usb usb3: SerialNumber: 0000:01:00.0
[ 10.424074] hub 3-0:1.0: USB hub found
[ 10.427948] hub 3-0:1.0: 4 ports detected
[ 10.591348] EXT4-fs (mmcblk0p2): mounted filesystem 76e585ad-07e2-43e0-aae7-43697734a9c4 with ordered data mode. Quota mode: none.
[ 10.658391] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 10.717021] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 10.823840] usb 2-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54
[ 10.832181] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.839439] usb 2-1: Product: USB2.1 Hub
[ 10.843422] usb 2-1: Manufacturer: GenesysLogic
[ 10.851736] hub 2-1:1.0: USB hub found
[ 10.856225] hub 2-1:1.0: 4 ports detected
[ 10.909886] systemd[1]: System time before build time, advancing clock.
[ 10.947056] usb 3-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 10.955466] systemd[1]: Inserted module 'autofs4'
[ 10.975706] usb 3-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.54
[ 10.984029] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.991283] usb 3-1: Product: USB3.1 Hub
[ 10.995270] usb 3-1: Manufacturer: GenesysLogic
[ 11.004261] hub 3-1:1.0: USB hub found
[ 11.008720] hub 3-1:1.0: 4 ports detected
[ 11.013048] systemd[1]: systemd 252.5-2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 11.045555] systemd[1]: Detected architecture arm64.
[ 11.068093] systemd[1]: Hostname set to <rpi4-20230307>.
[ 11.372962] systemd[1]: Queued start job for default target graphical.target.
[ 11.404694] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 11.431376] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 11.459456] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 11.487308] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 11.515115] systemd[1]: Created slice user.slice - User and Session Slice.
[ 11.538596] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 11.566527] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 11.594854] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 11.626478] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 11.650418] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 11.678427] systemd[1]: Reached target paths.target - Path Units.
[ 11.702417] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 11.726391] systemd[1]: Reached target slices.target - Slice Units.
[ 11.750410] systemd[1]: Reached target swap.target - Swaps.
[ 11.770407] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 11.798822] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 11.826561] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 11.854837] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 11.882732] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 11.910746] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 11.935246] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 11.962692] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 12.006600] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 12.033105] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 12.061091] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 12.088991] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 12.117491] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 12.145364] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 12.173387] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 12.201603] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 12.229518] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 12.248682] fuse: init (API version 7.38)
[ 12.254624] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 12.290806] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 12.318928] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 12.346941] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 12.369881] EXT4-fs (mmcblk0p2): re-mounted 76e585ad-07e2-43e0-aae7-43697734a9c4. Quota mode: none.
[ 12.379420] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[ 12.394204] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 12.422815] systemd[1]: Started systemd-journald.service - Journal Service.
[ 12.825398] systemd-journald[222]: Received client request to flush runtime journal.
[ 12.836254] systemd-journald[222]: File /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 13.546414] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.559829] iproc-rng200 fe104000.rng: hwrng registered
[ 13.613221] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 13.710060] [drm] Initialized v3d 1.0.0 20180419 for fec00000.gpu on minor 0
[ 13.739924] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 13.750638] mc: Linux media interface: v0.10
[ 13.785003] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.801798] videodev: Linux video capture interface: v2.00
[ 13.811527] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 13.873899] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.898212] Console: switching to colour dummy device 80x25
[ 13.898513] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 13.935810] audit: type=1400 audit(1675040631.023:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=346 comm="apparmor_parser"
[ 13.951158] audit: type=1400 audit(1675040631.027:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=347 comm="apparmor_parser"
[ 13.951770] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 13.968187] audit: type=1400 audit(1675040631.027:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=347 comm="apparmor_parser"
[ 13.989368] audit: type=1400 audit(1675040631.039:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=349 comm="apparmor_parser"
[ 14.007674] audit: type=1400 audit(1675040631.039:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=349 comm="apparmor_parser"
[ 14.025945] audit: type=1400 audit(1675040631.039:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=349 comm="apparmor_parser"
[ 14.044325] audit: type=1400 audit(1675040631.039:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=349 comm="apparmor_parser"
[ 14.053979] Registered IR keymap rc-cec
[ 14.065816] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 14.073723] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
[ 14.111139] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 14.118921] Registered IR keymap rc-cec
[ 14.122949] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 14.130483] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
[ 14.149200] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 14.156226] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 14.166016] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.174576] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.182578] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.190243] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 14.199249] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 14.226017] Bluetooth: Core ver 2.22
[ 14.229811] NET: Registered PF_BLUETOOTH protocol family
[ 14.235247] Bluetooth: HCI device and connection manager initialized
[ 14.242619] Bluetooth: HCI socket layer initialized
[ 14.247632] Bluetooth: L2CAP socket layer initialized
[ 14.252788] Bluetooth: SCO socket layer initialized
[ 14.275535] systemd-journald[222]: Oldest entry in /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[ 14.275550] systemd-journald[222]: /var/log/journal/04dbc87385f34b49af5f5948a7d17809/system.journal: Journal header limits reached or header out-of-date, rotating.
[ 14.283240] Console: switching to colour frame buffer device 240x67
[ 14.323550] Bluetooth: HCI UART driver ver 2.3
[ 14.335320] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[ 14.341668] Bluetooth: HCI UART protocol H4 registered
[ 14.357601] Bluetooth: HCI UART protocol LL registered
[ 14.362846] Bluetooth: HCI UART protocol ATH3K registered
[ 14.368456] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 14.375594] Bluetooth: HCI UART protocol Intel registered
[ 14.381875] Bluetooth: HCI UART protocol Broadcom registered
[ 14.383301] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 14.388107] Bluetooth: HCI UART protocol QCA registered
[ 14.396353] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 14.402219] Bluetooth: HCI UART protocol AG6XX registered
[ 14.402257] Bluetooth: HCI UART protocol Marvell registered
[ 14.530445] uart-pl011 fe201000.serial: no DMA platform data
[ 15.194826] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 15.263357] bcmgenet fd580000.ethernet eth0: Link is Down
[ 16.674349] Bluetooth: hci0: command 0xfc18 tx timeout
[ 19.362458] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 19.370808] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.674343] Bluetooth: hci0: BCM: failed to write update baudrate (-110)
[ 24.681157] Bluetooth: hci0: Failed to set baudrate
[ 26.690343] Bluetooth: hci0: command 0x0c03 tx timeout
[ 30.517817] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=481 'systemd'
[ 34.914342] Bluetooth: hci0: BCM: Reset failed (-110)
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.15.84-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1613 SMP PREEMPT Thu Jan 5 12:03:08 GMT 2023 [ 0.000000] random: crng init done [ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.0 [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges [ 0.000000] percpu: Embedded 28 pages/cpu s77336 r8192 d29160 u114688 [ 0.000000] pcpu-alloc: s77336 r8192 d29160 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2028848 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=E4:5F:01:4D:5F:D7 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=2633f715-02 rootfstype=ext4 fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB) [ 0.000000] Memory: 7668384K/8245248K available (11520K kernel code, 1956K rwdata, 4136K rodata, 3776K init, 975K bss, 249184K reserved, 327680K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 38065 entries in 149 pages [ 0.000000] ftrace: allocated 149 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10) [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000355] Console: colour dummy device 80x25 [ 0.000966] printk: console [tty1] enabled [ 0.001048] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000) [ 0.001089] pid_max: default: 32768 minimum: 301 [ 0.001248] LSM: Security Framework initializing [ 0.001546] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.001681] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003002] cgroup: Disabling memory control group subsystem [ 0.006038] rcu: Hierarchical SRCU implementation. [ 0.007234] EFI services will not be available. [ 0.007806] smp: Bringing up secondary CPUs ... [ 0.009038] Detected PIPT I-cache on CPU1 [ 0.009125] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.010352] Detected PIPT I-cache on CPU2 [ 0.010404] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.011592] Detected PIPT I-cache on CPU3 [ 0.011642] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.011796] smp: Brought up 1 node, 4 CPUs [ 0.011893] SMP: Total of 4 processors activated. [ 0.011963] CPU features: detected: 32-bit EL0 Support [ 0.011986] CPU features: detected: 32-bit EL1 Support [ 0.012010] CPU features: detected: CRC32 instructions [ 0.045452] CPU: All CPU(s) started at EL2 [ 0.045557] alternatives: patching kernel code [ 0.047483] devtmpfs: initialized [ 0.059212] Enabled cp15_barrier support [ 0.059287] Enabled setend support [ 0.059328] KASLR enabled [ 0.059550] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.059602] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.069809] pinctrl core: initialized pinctrl subsystem [ 0.070734] DMI not present or invalid. [ 0.071477] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.075331] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.075667] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.076633] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.076757] audit: initializing netlink subsys (disabled) [ 0.077092] audit: type=2000 audit(0.076:1): state=initialized audit_enabled=0 res=1 [ 0.077702] thermal_sys: Registered thermal governor 'step_wise' [ 0.077948] cpuidle: using governor menu [ 0.078275] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.078489] ASID allocator initialised with 32768 entries [ 0.078673] Serial: AMBA PL011 UART driver [ 0.091640] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.116400] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-01-05T10:46:54, variant start [ 0.120415] raspberrypi-firmware soc:firmware: Firmware hash is 8ba17717fbcedd4c3b6d4bce7e50c7af4155cba9 [ 0.173306] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.177690] vgaarb: loaded [ 0.178161] SCSI subsystem initialized [ 0.178406] usbcore: registered new interface driver usbfs [ 0.178475] usbcore: registered new interface driver hub [ 0.178555] usbcore: registered new device driver usb [ 0.178945] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.179178] usb_phy_generic phy: dummy supplies not allowed for exclusive requests [ 0.179503] pps_core: LinuxPPS API ver. 1 registered [ 0.179527] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 0.179566] PTP clock support registered [ 0.181225] clocksource: Switched to clocksource arch_sys_counter [ 0.273823] VFS: Disk quotas dquot_6.6.0 [ 0.273976] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.274169] FS-Cache: Loaded [ 0.274443] CacheFiles: Loaded [ 0.275842] simple-framebuffer 3e3cf000.framebuffer: framebuffer at 0x3e3cf000, 0x7f8000 bytes [ 0.275880] simple-framebuffer 3e3cf000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680 [ 0.288079] Console: switching to colour frame buffer device 240x67 [ 0.299085] simple-framebuffer 3e3cf000.framebuffer: fb0: simplefb registered! [ 0.309941] NET: Registered PF_INET protocol family [ 0.311043] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.317271] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.317476] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.317589] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.318158] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.319322] TCP: Hash tables configured (established 65536 bind 65536) [ 0.319726] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.319964] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.320498] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.322192] RPC: Registered named UNIX socket transport module. [ 0.322286] RPC: Registered udp transport module. [ 0.322348] RPC: Registered tcp transport module. [ 0.322411] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.322500] PCI: CLS 0 bytes, default 64 [ 0.325077] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.325580] kvm [1]: IPA Size Limit: 44 bits [ 0.326840] kvm [1]: vgic interrupt IRQ9 [ 0.327166] kvm [1]: Hyp mode initialized successfully [ 1.165639] Initialise system trusted keyrings [ 1.166141] workingset: timestamp_bits=46 max_order=21 bucket_order=0 [ 1.173319] zbud: loaded [ 1.175334] FS-Cache: Netfs 'nfs' registered for caching [ 1.176145] NFS: Registering the id_resolver key type [ 1.176245] Key type id_resolver registered [ 1.176304] Key type id_legacy registered [ 1.176468] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.176553] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.177919] Key type asymmetric registered [ 1.177987] Asymmetric key parser 'x509' registered [ 1.178129] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.178482] io scheduler mq-deadline registered [ 1.178549] io scheduler kyber registered [ 1.187178] gpio-507 (ant1): hogged as output/high [ 1.191521] gpio-511 (ant2): hogged as output/low [ 1.193106] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.196194] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.199282] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.202337] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x01ffffffff -> 0x0400000000 [ 1.239327] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.242607] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.245566] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.248544] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.251681] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.254957] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.261935] pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330 [ 1.265001] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit] [ 1.268294] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.274980] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.277979] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600001fff 64bit] [ 1.280967] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.283928] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.286965] pci 0000:00:00.0: enabling device (0000 -> 0002) [ 1.289902] pci 0000:01:00.0: enabling device (0000 -> 0002) [ 6.292814] pci 0000:01:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x1801 [ 6.295779] pci 0000:01:00.0: quirk_usb_early_handoff+0x0/0x8b0 took 4891439 usecs [ 6.311060] iproc-rng200 fe104000.rng: hwrng registered [ 6.314534] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 6.319013] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 6.335069] brd: module loaded [ 6.348156] loop: module loaded [ 6.351963] Loading iSCSI transport class v2.0-870. [ 6.360243] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 6.421392] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 6.425459] usbcore: registered new interface driver r8152 [ 6.428322] usbcore: registered new interface driver lan78xx [ 6.431160] usbcore: registered new interface driver smsc95xx [ 6.434470] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 6.437182] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 16.439927] xhci_hcd 0000:01:00.0: can't setup: -110 [ 16.442611] xhci_hcd 0000:01:00.0: USB bus 1 deregistered [ 16.445296] xhci_hcd 0000:01:00.0: init 0000:01:00.0 fail, -110 [ 16.447938] xhci_hcd: probe of 0000:01:00.0 failed with error -110 [ 16.476657] xhci-hcd fe9c0000.xhci: xHCI Host Controller [ 16.479403] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 1 [ 16.482477] xhci-hcd fe9c0000.xhci: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000000010010 [ 16.485318] xhci-hcd fe9c0000.xhci: irq 60, io mem 0xfe9c0000 [ 16.488253] xhci-hcd fe9c0000.xhci: xHCI Host Controller [ 16.490882] xhci-hcd fe9c0000.xhci: new USB bus registered, assigned bus number 2 [ 16.493588] xhci-hcd fe9c0000.xhci: Host supports USB 3.0 SuperSpeed [ 16.496643] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 16.499387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.502112] usb usb1: Product: xHCI Host Controller [ 16.504795] usb usb1: Manufacturer: Linux 5.15.84-v8+ xhci-hcd [ 16.507470] usb usb1: SerialNumber: fe9c0000.xhci [ 16.510874] hub 1-0:1.0: USB hub found [ 16.513639] hub 1-0:1.0: 1 port detected [ 16.516948] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 16.519964] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 16.522732] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 16.525424] usb usb2: Product: xHCI Host Controller [ 16.528124] usb usb2: Manufacturer: Linux 5.15.84-v8+ xhci-hcd [ 16.530826] usb usb2: SerialNumber: fe9c0000.xhci [ 16.534135] hub 2-0:1.0: USB hub found [ 16.536843] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 16.540215] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 16.543346] dwc_otg: FIQ enabled [ 16.543358] dwc_otg: NAK holdoff enabled [ 16.543367] dwc_otg: FIQ split-transaction FSM enabled [ 16.543381] Module dwc_common_port init [ 16.543991] usbcore: registered new interface driver uas [ 16.546859] usbcore: registered new interface driver usb-storage [ 16.549814] mousedev: PS/2 mouse device common for all mice [ 16.557943] sdhci: Secure Digital Host Controller Interface driver [ 16.560691] sdhci: Copyright(c) Pierre Ossman [ 16.564066] sdhci-pltfm: SDHCI platform and OF driver helper [ 16.570498] ledtrig-cpu: registered to indicate activity on CPUs [ 16.573830] hid: raw HID events driver (C) Jiri Kosina [ 16.576692] usbcore: registered new interface driver usbhid [ 16.579387] usbhid: USB HID core driver [ 16.582406] ashmem: initialized [ 16.594310] NET: Registered PF_PACKET protocol family [ 16.597253] Key type dns_resolver registered [ 16.601363] registered taskstats version 1 [ 16.604033] Loading compiled-in X.509 certificates [ 16.607327] Key type .fscrypt registered [ 16.610011] Key type fscrypt-provisioning registered [ 16.624033] uart-pl011 fe201000.serial: there is not valid maps for state default [ 16.627121] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 16.629994] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2 [ 16.644203] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 16.647525] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 16.651495] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 16.654242] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 16.688803] of_cfs_init [ 16.691670] of_cfs_init: OK [ 16.722560] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 16.725724] Waiting for root device PARTUUID=2633f715-02... [ 16.769309] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 16.796903] mmc0: new DDR MMC card at address 0001 [ 16.800837] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB [ 16.809033] mmcblk0: p1 p2 [ 16.812442] mmcblk0: mmc0:0001 BJTD4R 29.1 GiB [ 16.815836] mmcblk0boot0: mmc0:0001 BJTD4R 4.00 MiB [ 16.821551] mmcblk0boot1: mmc0:0001 BJTD4R 4.00 MiB [ 16.826723] mmcblk0rpmb: mmc0:0001 BJTD4R 4.00 MiB, chardev (242:0) [ 16.846435] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 16.849554] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 16.856110] devtmpfs: mounted [ 16.867885] Freeing unused kernel memory: 3776K [ 16.871018] Run /sbin/init as init process [ 16.873799] with arguments: [ 16.873812] /sbin/init [ 16.873824] with environment: [ 16.873834] HOME=/ [ 16.873844] TERM=linux [ 16.917625] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 16.920517] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 16.976801] hub 1-1:1.0: USB hub found [ 16.979955] hub 1-1:1.0: 4 ports detected [ 17.115025] systemd[1]: System time before build time, advancing clock. [ 17.281006] NET: Registered PF_INET6 protocol family [ 17.285955] Segment Routing with IPv6 [ 17.288759] In-situ OAM (IOAM) with IPv6 [ 17.347801] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 17.355107] systemd[1]: Detected architecture arm64. [ 17.372826] systemd[1]: Set hostname to <raspberrypi>. [ 18.007461] systemd[1]: Queued start job for default target Multi-User System. [ 18.015245] systemd[1]: Created slice system-getty.slice. [ 18.023361] systemd[1]: Created slice system-modprobe.slice. [ 18.031070] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 18.038628] systemd[1]: Created slice User and Session Slice. [ 18.045695] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 18.052794] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 18.060646] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 18.067819] systemd[1]: Reached target Local Encrypted Volumes. [ 18.074931] systemd[1]: Reached target Paths. [ 18.081989] systemd[1]: Reached target Slices. [ 18.088999] systemd[1]: Reached target Swap. [ 18.098874] systemd[1]: Listening on Syslog Socket. [ 18.107183] systemd[1]: Listening on fsck to fsckd communication Socket. [ 18.114639] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 18.123004] systemd[1]: Listening on Journal Audit Socket. [ 18.130947] systemd[1]: Listening on Journal Socket (/dev/log). [ 18.139130] systemd[1]: Listening on Journal Socket. [ 18.150293] systemd[1]: Listening on udev Control Socket. [ 18.158768] systemd[1]: Listening on udev Kernel Socket. [ 18.167005] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 18.174867] systemd[1]: Mounting POSIX Message Queue File System... [ 18.188259] systemd[1]: Mounting RPC Pipe File System... [ 18.203433] systemd[1]: Mounting Kernel Debug File System... [ 18.216228] systemd[1]: Mounting Kernel Trace File System... [ 18.224478] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 18.233963] systemd[1]: Starting Restore / save the current clock... [ 18.247761] systemd[1]: Starting Set the console keyboard layout... [ 18.263157] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 18.277612] systemd[1]: Starting Load Kernel Module configfs... [ 18.292076] systemd[1]: Starting Load Kernel Module drm... [ 18.310158] systemd[1]: Starting Load Kernel Module fuse... [ 18.322455] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 18.332214] systemd[1]: Starting File System Check on Root Device... [ 18.351258] systemd[1]: Starting Journal Service... [ 18.366322] fuse: init (API version 7.34) [ 18.370518] systemd[1]: Starting Load Kernel Modules... [ 18.386246] systemd[1]: Starting Coldplug All udev Devices... [ 18.429542] systemd[1]: Mounted POSIX Message Queue File System. [ 18.445993] systemd[1]: Mounted RPC Pipe File System. [ 18.472913] systemd[1]: Mounted Kernel Debug File System. [ 18.480740] systemd[1]: Mounted Kernel Trace File System. [ 18.495347] systemd[1]: Finished Restore / save the current clock. [ 18.526563] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 18.537341] systemd[1]: modprobe@configfs.service: Succeeded. [ 18.542775] systemd[1]: Finished Load Kernel Module configfs. [ 18.552696] systemd[1]: modprobe@drm.service: Succeeded. [ 18.558659] systemd[1]: Finished Load Kernel Module drm. [ 18.568541] systemd[1]: modprobe@fuse.service: Succeeded. [ 18.573880] systemd[1]: Finished Load Kernel Module fuse. [ 18.583801] systemd[1]: Finished File System Check on Root Device. [ 18.594209] systemd[1]: Finished Load Kernel Modules. [ 18.614455] systemd[1]: Mounting FUSE Control File System... [ 18.627736] systemd[1]: Mounting Kernel Configuration File System... [ 18.642651] systemd[1]: Started File System Check Daemon to report status. [ 18.665986] systemd[1]: Starting Remount Root and Kernel File Systems... [ 18.678575] systemd[1]: Starting Apply Kernel Variables... [ 18.693594] systemd[1]: Mounted FUSE Control File System. [ 18.717867] systemd[1]: Mounted Kernel Configuration File System. [ 18.737925] systemd[1]: Started Journal Service. [ 18.843553] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. [ 18.900078] systemd-journald[146]: Received client request to flush runtime journal. [ 18.908223] systemd-journald[146]: File /var/log/journal/5c71b33d54d54b56a83192f2a7dd0c26/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 19.868410] mc: Linux media interface: v0.10 [ 20.022952] videodev: Linux video capture interface: v2.00 [ 20.085706] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 20.116995] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 20.117044] [vc_sm_connected_init]: start [ 20.126068] [vc_sm_connected_init]: installed successfully [ 20.165594] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 20.178502] bcm2835_audio bcm2835_audio: there is not valid maps for state default [ 20.222178] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 20.231807] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 20.236649] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 20.237863] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 20.238268] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 20.251942] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 20.269008] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 20.270311] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 20.296440] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 20.333534] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned. [ 20.339814] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 20.371042] rpivid feb10000.codec: Device registered as /dev/video19 [ 20.383685] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 20.383742] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 20.383765] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 20.383784] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 20.383826] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 20.425869] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 20.426721] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 20.427593] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 20.427623] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 20.427682] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 20.435536] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 20.435595] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 20.435638] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 20.435657] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 20.435674] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 20.436031] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 20.555668] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 20.558412] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 20.572482] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 20.572563] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 20.609906] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 20.609978] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 20.617966] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 20.618066] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 20.700103] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 21.480722] checking generic (3e3cf000 7f8000) vs hw (0 ffffffffffffffff) [ 21.480772] fb0: switching to vc4 from simple [ 21.490606] Console: switching to colour dummy device 80x25 [ 21.538621] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 21.541009] Registered IR keymap rc-cec [ 21.541283] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 21.541508] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 [ 21.549809] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 21.560367] Registered IR keymap rc-cec [ 21.560599] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 21.560831] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1 [ 21.567421] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 21.567959] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 21.568349] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 21.568694] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 21.569042] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 21.569502] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 21.569876] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 21.586325] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 21.683816] Console: switching to colour frame buffer device 240x67 [ 21.712387] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 22.009917] 8021q: 802.1Q VLAN Support v1.8 [ 22.086183] uart-pl011 fe201000.serial: no DMA platform data [ 22.096980] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 22.360820] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 22.389520] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 22.397905] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 22.488754] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 22.490537] bcmgenet fd580000.ethernet eth0: Link is Down [ 26.589395] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 26.589433] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Attachment:
signature.asc
Description: PGP signature
