Re: [PATCH v1 1/3] dt-binding: pci: add JH7110 PCIe dt-binding documents.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/04/2023 20:45, Conor Dooley wrote:
> On Thu, Apr 06, 2023 at 07:35:09PM +0100, Conor Dooley wrote:
>> On Thu, Apr 06, 2023 at 08:24:55PM +0200, Krzysztof Kozlowski wrote:
>>> On 06/04/2023 13:11, Minda Chen wrote:
>>>> +
>>>> +  interrupt-controller:
>>>> +    type: object
>>>> +    properties:
>>>> +      '#address-cells':
>>>> +        const: 0
>>>> +
>>>> +      '#interrupt-cells':
>>>> +        const: 1
>>>> +
>>>> +      interrupt-controller: true
>>>> +
>>>> +    required:
>>>> +      - '#address-cells'
>>>> +      - '#interrupt-cells'
>>>> +      - interrupt-controller
>>>> +
>>>> +    additionalProperties: false
>>>> +
>>>> +required:
>>>> +  - reg
>>>> +  - reg-names
>>>> +  - "#interrupt-cells"
>>>
>>> Keep consistent quotes - either ' or "
>>>
>>> Are you sure this is correct? You have interrupt controller as child node.
>>
>> I know existing stuff in-tree is far from a guarantee that it'll be
>> right, but this does at least follow what we've got for PolarFire SoC:
>> Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
>>
>> Both PLDA and both RISC-V w/ a PLIC as the interrupt controller, so in
>> similar waters.
>> This note existed in the original text form binding of the Microchip
>> PCI controller:
>> | +NOTE:
>> | +The core provides a single interrupt for both INTx/MSI messages. So,
>> | +create an interrupt controller node to support 'interrupt-map' DT
>> | +functionality.  The driver will create an IRQ domain for this map, decode
>> | +the four INTx interrupts in ISR and route them to this domain.
>>
>> Given the similarities, I figure the same requirement applies here too.
>> Minda?
> 
> Further, if, as I currently suspect, there's a lot of commonality here,
> should the binding as well as the driver be split into common pdla bits
> and microchip/starfive specific ones?
> 
> Suppose that's more one for you Krzysztof.

Yeah, looks like only clocks and resets are different. At the end it
depends how much code you would remove...

Best regards,
Krzysztof




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux