On Wed, Apr 05, 2023 at 03:04:39PM +0200, Simon Horman wrote:
> On Mon, Apr 03, 2023 at 01:58:49PM +0300, Denis Plotnikov wrote:
> > On 31.03.2023 20:52, Simon Horman wrote:
> > > On Fri, Mar 31, 2023 at 11:06:05AM +0300, Denis Plotnikov wrote:
> > > > Static code analyzer complains to unchecked return value.
> > > > It seems that pci_reset_function return something meaningful
> > > > only if "reset_methods" is set.
> > > > Even if reset_methods isn't used check the return value to avoid
> > > > possible bugs leading to undefined behavior in the future.
> > > >
> > > > Signed-off-by: Denis Plotnikov <den-plotnikov@xxxxxxxxxxxxxx>
> > > nit: The tree this patch is targeted at should be designated, probably
> > > net-next, so the '[PATCH net-next]' in the subject.
> > >
> > > > ---
> > > > drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 4 +++-
> > > > 1 file changed, 3 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
> > > > index 87f76bac2e463..39ecfc1a1dbd0 100644
> > > > --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
> > > > +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
> > > > @@ -628,7 +628,9 @@ int qlcnic_fw_create_ctx(struct qlcnic_adapter *dev)
> > > > int i, err, ring;
> > > > if (dev->flags & QLCNIC_NEED_FLR) {
> > > > - pci_reset_function(dev->pdev);
> > > > + err = pci_reset_function(dev->pdev);
> > > > + if (err && err != -ENOTTY)
> > > Are you sure about the -ENOTTY part?
> > >
> > > It seems odd to me that an FLR would be required but reset is not supported.
> > No, I'm not sure. My logic is: if the reset method isn't set than
> > pci_reset_function() returns -ENOTTY so treat that result as ok.
> > pci_reset_function may return something different than -ENOTTY only if
> > pci_reset_fn_methods[m].reset_fn is set.
>
> I see your reasoning: -ENOTTY means nothing happened, and probably that is ok.
> I think my main question is if that can ever happen.
> If that is unknown, then I think this conservative approach makes sense.
The commit log mentions "reset_methods", which I don't think is really
relevant here because reset_methods is an internal implementation
detail. The point is that pci_reset_function() returns 0 if it was
successful and a negative value if it failed.
If the driver thinks the device needs to be reset, ignoring any
negative return value seems like a mistake because the device was not
reset.
If the reset is required for a firmware update to take effect, maybe a
diagnostic would be helpful if it fails, e.g., the other "Adapter
initialization failed. Please reboot" messages.
"QLCNIC_NEED_FLR" suggests that the driver expects an FLR (as opposed
to other kinds of reset). If the driver knows that all qlcnic devices
support FLR, it could use pcie_flr() directly.
pci_reset_function() does have the possibility that the reset works on
some devices but not all. Secondary Bus Reset fails if there are
other functions on the same bus, e.g., a multi-function device. And
there's some value in doing the reset the same way in all cases.
So I would suggest something like:
if (dev->flags & QLCNIC_NEED_FLR) {
err = pcie_flr(dev->pdev);
if (err) {
dev_err(&pdev->dev, "Adapter reset failed (%d). Please reboot\n", err);
return err;
}
dev->flags &= ~QLCNIC_NEED_FLR;
}
Or, if there are qlcnic devices that don't support FLR:
if (dev->flags & QLCNIC_NEED_FLR) {
err = pci_reset_function(dev->pdev);
if (err) {
dev_err(&pdev->dev, "Adapter reset failed (%d). Please reboot\n", err);
return err;
}
dev->flags &= ~QLCNIC_NEED_FLR;
}
> > > > + return err;
> > > > dev->flags &= ~QLCNIC_NEED_FLR;
> > > > }
> > > > --
> > > > 2.25.1
> > > >
