When there is no card plugged on PCIe port a trace that says the port will
be disabled appears. This is expected behaviour but currently is using
'dev_err' for doing that. Since this is not an error at all, change the
trace to use 'dev_info' instead.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
---
drivers/pci/controller/pcie-mt7621.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/pcie-mt7621.c b/drivers/pci/controller/pcie-mt7621.c
index 63a5f4463a9f..a445ec314375 100644
--- a/drivers/pci/controller/pcie-mt7621.c
+++ b/drivers/pci/controller/pcie-mt7621.c
@@ -378,8 +378,8 @@ static int mt7621_pcie_init_ports(struct mt7621_pcie *pcie)
u32 slot = port->slot;
if (!mt7621_pcie_port_is_linkup(port)) {
- dev_err(dev, "pcie%d no card, disable it (RST & CLK)\n",
- slot);
+ dev_info(dev, "pcie%d no card, disable it (RST & CLK)\n",
+ slot);
mt7621_control_assert(port);
port->enabled = false;
num_disabled++;
--
2.25.1
