On 2023-03-09 10:39:35 -0600, Bjorn Helgaas wrote: > [+cc Daire, Conor for apple/microchip use of ECAM .init() method] > > On Thu, Mar 09, 2023 at 02:36:24PM +0100, Janne Grunau wrote: > > Fixes following warning inside of_irq_parse_raw() called from the common > > PCI device probe path. > > > > /soc/pcie@690000000/pci@1,0 interrupt-map failed, using interrupt-controller > > WARNING: CPU: 4 PID: 252 at drivers/of/irq.c:279 of_irq_parse_raw+0x5fc/0x724 > > Based on this commit log, I assume this patch only fixes the warning, > and the system *works* just fine either way. If that's the case, it's > debatable whether it meets the stable kernel criteria, although the > documented criteria are much stricter than what happens in practice. Yes, it fixes only the warning and hides devices. The present devices still work. I confused myself with the submitted M2 devicetree. It missed information in the dt node of an disabled PCIe port breaking probing of the pcie controller. I agree that the Cc: stable is not necessary. Please drop it or tell me to resend the change. > > ... > > Call trace: > > of_irq_parse_raw+0x5fc/0x724 > > of_irq_parse_and_map_pci+0x128/0x1d8 > > pci_assign_irq+0xc8/0x140 > > pci_device_probe+0x70/0x188 > > really_probe+0x178/0x418 > > __driver_probe_device+0x120/0x188 > > driver_probe_device+0x48/0x22c > > __device_attach_driver+0x134/0x1d8 > > bus_for_each_drv+0x8c/0xd8 > > __device_attach+0xdc/0x1d0 > > device_attach+0x20/0x2c > > pci_bus_add_device+0x5c/0xc0 > > pci_bus_add_devices+0x58/0x88 > > pci_host_probe+0x124/0x178 > > pci_host_common_probe+0x124/0x198 [pci_host_common] > > apple_pcie_probe+0x108/0x16c [pcie_apple] > > platform_probe+0xb4/0xdc > > > > This became apparent after disabling unused PCIe ports in the Apple > > silicon device trees instead of deleting them. > > > > Use for_each_available_child_of_node instead of for_each_child_of_node > > which takes the "status" property into account. > > > > Link: https://lore.kernel.org/asahi/20230214-apple_dts_pcie_disable_unused-v1-0-5ea0d3ddcde3@xxxxxxxxxx/ > > Link: https://lore.kernel.org/asahi/1ea2107a-bb86-8c22-0bbc-82c453ab08ce@xxxxxxxxxx/ > > Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up") > > Cc: stable@xxxxxxxxxxxxxxx > > Reviewed-by: Marc Zyngier <maz@xxxxxxxxxx> > > Signed-off-by: Janne Grunau <j@xxxxxxxxxx> > > --- > > Changes in v2: > > - rewritten commit message with more details and corrections > > - collected Marc's "Reviewed-by:" > > - Link to v1: https://lore.kernel.org/r/20230307-apple_pcie_disabled_ports-v1-1-b32ef91faf19@xxxxxxxxxx > > --- > > drivers/pci/controller/pcie-apple.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c > > index 66f37e403a09..f8670a032f7a 100644 > > --- a/drivers/pci/controller/pcie-apple.c > > +++ b/drivers/pci/controller/pcie-apple.c > > @@ -783,7 +783,7 @@ static int apple_pcie_init(struct pci_config_window *cfg) > > cfg->priv = pcie; > > INIT_LIST_HEAD(&pcie->ports); > > > > - for_each_child_of_node(dev->of_node, of_port) { > > + for_each_available_child_of_node(dev->of_node, of_port) { > > ret = apple_pcie_setup_port(pcie, of_port); > > if (ret) { > > dev_err(pcie->dev, "Port %pOF setup fail: %d\n", of_port, ret); > > Is this change still needed after 6fffbc7ae137 ("PCI: Honor firmware's > device disabled status")? This is a generic problem, and it would be > a lot nicer if we had a generic solution. But I assume it *is* still > needed because Rob gave his Reviewed-by. 6fffbc7ae137 avoids the warning and hides the disabled ports as well. I think we want to keep this change however in the hope that avoiding the port setup of disbled ports saves energy. Thanks Janne
