To maintain uniformity throughout the driver and also to make the code easier to read, let's make use of bitfield definitions for register fields. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> --- drivers/pci/controller/dwc/pcie-qcom.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index a33653d576b6..44c31c65695a 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -76,24 +76,24 @@ #define REQ_NOT_ENTR_L1 BIT(5) /* PARF_PCS_DEEMPH register fields */ -#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) ((x) << 16) -#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) ((x) << 8) -#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) ((x) << 0) +#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) FIELD_PREP(GENMASK(21, 16), x) +#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) FIELD_PREP(GENMASK(13, 8), x) +#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) FIELD_PREP(GENMASK(5, 0), x) /* PARF_PCS_SWING register fields */ -#define PCS_SWING_TX_SWING_FULL(x) ((x) << 8) -#define PCS_SWING_TX_SWING_LOW(x) ((x) << 0) +#define PCS_SWING_TX_SWING_FULL(x) FIELD_PREP(GENMASK(14, 8), x) +#define PCS_SWING_TX_SWING_LOW(x) FIELD_PREP(GENMASK(6, 0), x) /* PARF_PHY_CTRL register fields */ #define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK GENMASK(20, 16) -#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) ((x) << 16) +#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) FIELD_PREP(PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK, x) /* PARF_PHY_REFCLK register fields */ #define PHY_REFCLK_SSP_EN BIT(16) #define PHY_REFCLK_USE_PAD BIT(12) /* PARF_CONFIG_BITS register fields */ -#define PHY_RX0_EQ(x) ((x) << 24) +#define PHY_RX0_EQ(x) FIELD_PREP(GENMASK(26, 24), x) /* PARF_SLV_ADDR_SPACE_SIZE register value */ #define SLV_ADDR_SPACE_SZ 0x10000000 -- 2.25.1
