Re: [PATCH v2 3/6] ARM: dts: qcom: sdx65: Add support for PCIe PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8.03.2023 13:19, Rohit Agarwal wrote:
> Add devicetree support for PCIe PHY used in SDX65 platform. This PHY is
> used by the PCIe EP controller.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/qcom-sdx65.dtsi | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
> index 192f9f9..df9d428 100644
> --- a/arch/arm/boot/dts/qcom-sdx65.dtsi
> +++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
> @@ -293,6 +293,39 @@
>  			status = "disabled";
>  		};
>  
> +		pcie_phy: phy@1c06000 {
> +			compatible = "qcom,sdx65-qmp-gen4x2-pcie-phy";
> +			reg = <0x01c06000 0x2000>;

> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
No child nodes, please drop this hunk.


Konrad
> +			clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>,
> +				 <&gcc GCC_PCIE_CFG_AHB_CLK>,
> +				 <&gcc GCC_PCIE_0_CLKREF_EN>,
> +				 <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
> +				 <&gcc GCC_PCIE_PIPE_CLK>;
> +			clock-names = "aux",
> +				      "cfg_ahb",
> +				      "ref",
> +				      "rchng",
> +				      "pipe";
> +
> +			resets = <&gcc GCC_PCIE_PHY_BCR>;
> +			reset-names = "phy";
> +
> +			assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>;
> +			assigned-clock-rates = <100000000>;
> +
> +			power-domains = <&gcc PCIE_GDSC>;
> +
> +			#clock-cells = <0>;
> +			clock-output-names = "pcie_pipe_clk";
> +
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
>  		tcsr_mutex: hwlock@1f40000 {
>  			compatible = "qcom,tcsr-mutex";
>  			reg = <0x01f40000 0x40000>;



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux