Enable PCIe PHY on SDX65 MTP for PCIe EP. While at it, updating status as last property for each node. Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx> --- arch/arm/boot/dts/qcom-sdx65-mtp.dts | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index ed98c83..facb8e2 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -245,13 +245,18 @@ status = "okay"; }; -&qpic_bam { +&pcie_phy { + vdda-phy-supply = <&vreg_l1b_1p2>; + vdda-pll-supply = <&vreg_l4b_0p88>; + status = "okay"; }; -&qpic_nand { +&qpic_bam { status = "okay"; +}; +&qpic_nand { nand@0 { reg = <0>; @@ -262,11 +267,14 @@ secure-regions = /bits/ 64 <0x500000 0x500000 0xa00000 0xb00000>; }; + + status = "okay"; }; &remoteproc_mpss { - status = "okay"; memory-region = <&mpss_adsp_mem>; + + status = "okay"; }; &usb { @@ -278,14 +286,16 @@ }; &usb_hsphy { - status = "okay"; vdda-pll-supply = <&vreg_l4b_0p88>; vdda33-supply = <&vreg_l10b_3p08>; vdda18-supply = <&vreg_l5b_1p8>; + + status = "okay"; }; &usb_qmpphy { - status = "okay"; vdda-phy-supply = <&vreg_l4b_0p88>; vdda-pll-supply = <&vreg_l1b_1p2>; + + status = "okay"; }; -- 2.7.4