Re: [PATCH 5/6] ARM: dts: qcom: sdx65-mtp: Enable PCIE0 PHY

[Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>]

On 3/6/2023 4:00 PM, Konrad Dybcio wrote:
> On 6.03.2023 06:25, Rohit Agarwal wrote:
> > Enable PCIE0 PHY on SDX65 MTP for PCIE EP.
> >
> > Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
> > ---
> Status should go last. It would be nice if you could update
> that for the other nodes in this dt while at it.

Yes, Surely will do.

Thanks,
Rohit.
> Konrad
> >   arch/arm/boot/dts/qcom-sdx65-mtp.dts | 7 +++++++
> >   1 file changed, 7 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> > index 85ea02d..86bb853 100644
> > --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> > +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> > @@ -245,6 +245,13 @@
> >   	status = "okay";
> >   };
> >   
> > +&pcie0_phy {
> > +	status = "okay";
> > +
> > +	vdda-phy-supply = <&vreg_l1b_1p2>;
> > +	vdda-pll-supply = <&vreg_l4b_0p88>;
> > +};
> > +
> >   &qpic_bam {
> >   	status = "okay";
> >   };