Re: [PATCH v3 2/4] dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Serge, thanks for your reply.

On 16 2月 23 19:17:17, Serge Semin wrote:
> On Mon, Feb 13, 2023 at 09:24:07PM +0800, Cai Huoqing wrote:
> > From: Cai huoqing <cai.huoqing@xxxxxxxxx>
> > 
> > The structure dw_edma_core_ops has a set of the pointers
> > abstracting out the DW eDMA vX and DW HDMA Native controllers.
> > And use dw_edma_v0_core_register to set up operation.
> > 
> > Signed-off-by: Cai huoqing <cai.huoqing@xxxxxxxxx>
> > ---
> >  drivers/dma/dw-edma/dw-edma-core.c    | 63 ++++++------------
> >  drivers/dma/dw-edma/dw-edma-core.h    | 92 +++++++++++++++++++++++++++
> >  drivers/dma/dw-edma/dw-edma-v0-core.c | 88 +++++++++++++++++++++----
> >  drivers/dma/dw-edma/dw-edma-v0-core.h | 14 +---
> >  4 files changed, 188 insertions(+), 69 deletions(-)
> > 
> > diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> > index 1906a836f0aa..c171809beba1 100644
> > --- a/drivers/dma/dw-edma/dw-edma-core.c
> > +++ b/drivers/dma/dw-edma/dw-edma-core.c
> > @@ -183,6 +183,7 @@ static void vchan_free_desc(struct virt_dma_desc *vdesc)
> >  
> >  static void dw_edma_start_transfer(struct dw_edma_chan *chan)
> >  {
> > +	struct dw_edma *dw = chan->dw;
> >  	struct dw_edma_chunk *child;
> >  	struct dw_edma_desc *desc;
> >  	struct virt_dma_desc *vd;
> > @@ -200,7 +201,7 @@ static void dw_edma_start_transfer(struct dw_edma_chan *chan)
> >  	if (!child)
> >  		return;
> >  
> > -	dw_edma_v0_core_start(child, !desc->xfer_sz);
> > +	dw_edma_core_start(dw, child, !desc->xfer_sz);
> >  	desc->xfer_sz += child->ll_region.sz;
> >  	dw_edma_free_burst(child);
> >  	list_del(&child->list);
> > @@ -285,7 +286,7 @@ static int dw_edma_device_terminate_all(struct dma_chan *dchan)
> >  		chan->configured = false;
> >  	} else if (chan->status == EDMA_ST_IDLE) {
> >  		chan->configured = false;
> > -	} else if (dw_edma_v0_core_ch_status(chan) == DMA_COMPLETE) {
> > +	} else if (dw_edma_core_ch_status(chan) == DMA_COMPLETE) {
> >  		/*
> >  		 * The channel is in a false BUSY state, probably didn't
> >  		 * receive or lost an interrupt
> > @@ -588,13 +589,13 @@ dw_edma_device_prep_interleaved_dma(struct dma_chan *dchan,
> >  	return dw_edma_device_transfer(&xfer);
> >  }
> >  
> > -static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
> > +void dw_edma_done_interrupt(struct dw_edma_chan *chan)
> >  {
> >  	struct dw_edma_desc *desc;
> >  	struct virt_dma_desc *vd;
> >  	unsigned long flags;
> >  
> 
> > -	dw_edma_v0_core_clear_done_int(chan);
> > +	dw_edma_core_clear_done_int(chan);   <+
>                                               |
> As I already said in v2 just call this method + in the IRQ-handle loop
> within the IP-core-specific module (see further for details). Thus you'll
> be able to drop the dw_edma_core_ops.clear_done_int pointer. The same
> concerns the dw_edma_core_ops.clear_abort_int callback.
> 
> >  
> >  	spin_lock_irqsave(&chan->vc.lock, flags);
> >  	vd = vchan_next_desc(&chan->vc);
> > @@ -631,12 +632,12 @@ static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
> >  	spin_unlock_irqrestore(&chan->vc.lock, flags);
> >  }
> >  
> > -static void dw_edma_abort_interrupt(struct dw_edma_chan *chan)
> > +void dw_edma_abort_interrupt(struct dw_edma_chan *chan)
> >  {
> >  	struct virt_dma_desc *vd;
> >  	unsigned long flags;
> >  
> 
> > -	dw_edma_v0_core_clear_abort_int(chan);
> > +	dw_edma_core_clear_abort_int(chan);
> 
> ditto
> 
> >  
> >  	spin_lock_irqsave(&chan->vc.lock, flags);
> >  	vd = vchan_next_desc(&chan->vc);
> > @@ -651,41 +652,11 @@ static void dw_edma_abort_interrupt(struct dw_edma_chan *chan)
> >  
> >  static irqreturn_t dw_edma_interrupt(int irq, void *data, bool write)
> >  {
> > +	enum dw_edma_dir dir = write ? EDMA_DIR_WRITE : EDMA_DIR_READ;
> >  	struct dw_edma_irq *dw_irq = data;
> > -	struct dw_edma *dw = dw_irq->dw;
> > -	unsigned long total, pos, val;
> > -	unsigned long off;
> > -	u32 mask;
> > -
> > -	if (write) {
> > -		total = dw->wr_ch_cnt;
> > -		off = 0;
> > -		mask = dw_irq->wr_mask;
> > -	} else {
> > -		total = dw->rd_ch_cnt;
> > -		off = dw->wr_ch_cnt;
> > -		mask = dw_irq->rd_mask;
> > -	}
> > -
> > -	val = dw_edma_v0_core_status_done_int(dw, write ?
> > -							  EDMA_DIR_WRITE :
> > -							  EDMA_DIR_READ);
> > -	val &= mask;
> > -	for_each_set_bit(pos, &val, total) {
> > -		struct dw_edma_chan *chan = &dw->chan[pos + off];
> > -
> > -		dw_edma_done_interrupt(chan);
> > -	}
> > -
> > -	val = dw_edma_v0_core_status_abort_int(dw, write ?
> > -							   EDMA_DIR_WRITE :
> > -							   EDMA_DIR_READ);
> > -	val &= mask;
> > -	for_each_set_bit(pos, &val, total) {
> > -		struct dw_edma_chan *chan = &dw->chan[pos + off];
> >  
> > -		dw_edma_abort_interrupt(chan);
> > -	}
> > +	dw_edma_core_done_handle(dw_irq, dir);
> > +	dw_edma_core_abort_handle(dw_irq, dir);
> >  
> >  	return IRQ_HANDLED;
> >  }
> > @@ -806,7 +777,7 @@ static int dw_edma_channel_setup(struct dw_edma *dw, u32 wr_alloc, u32 rd_alloc)
> >  
> >  		vchan_init(&chan->vc, dma);
> >  
> > -		dw_edma_v0_core_device_config(chan);
> > +		dw_edma_core_ch_config(chan);
> >  	}
> >  
> >  	/* Set DMA channel capabilities */
> > @@ -951,14 +922,16 @@ int dw_edma_probe(struct dw_edma_chip *chip)
> >  
> >  	dw->chip = chip;
> >  
> > +	dw_edma_v0_core_register(dw);
> > +
> >  	raw_spin_lock_init(&dw->lock);
> >  
> >  	dw->wr_ch_cnt = min_t(u16, chip->ll_wr_cnt,
> > -			      dw_edma_v0_core_ch_count(dw, EDMA_DIR_WRITE));
> > +			      dw_edma_core_ch_count(dw, EDMA_DIR_WRITE));
> >  	dw->wr_ch_cnt = min_t(u16, dw->wr_ch_cnt, EDMA_MAX_WR_CH);
> >  
> >  	dw->rd_ch_cnt = min_t(u16, chip->ll_rd_cnt,
> > -			      dw_edma_v0_core_ch_count(dw, EDMA_DIR_READ));
> > +			      dw_edma_core_ch_count(dw, EDMA_DIR_READ));
> >  	dw->rd_ch_cnt = min_t(u16, dw->rd_ch_cnt, EDMA_MAX_RD_CH);
> >  
> >  	if (!dw->wr_ch_cnt && !dw->rd_ch_cnt)
> > @@ -977,7 +950,7 @@ int dw_edma_probe(struct dw_edma_chip *chip)
> >  		 dev_name(chip->dev));
> >  
> >  	/* Disable eDMA, only to establish the ideal initial conditions */
> > -	dw_edma_v0_core_off(dw);
> > +	dw_edma_core_off(dw);
> >  
> >  	/* Request IRQs */
> >  	err = dw_edma_irq_request(dw, &wr_alloc, &rd_alloc);
> > @@ -990,7 +963,7 @@ int dw_edma_probe(struct dw_edma_chip *chip)
> >  		goto err_irq_free;
> >  
> >  	/* Turn debugfs on */
> > -	dw_edma_v0_core_debugfs_on(dw);
> > +	dw_edma_core_debugfs_on(dw);
> >  
> >  	chip->dw = dw;
> >  
> > @@ -1016,7 +989,7 @@ int dw_edma_remove(struct dw_edma_chip *chip)
> >  		return -ENODEV;
> >  
> >  	/* Disable eDMA */
> > -	dw_edma_v0_core_off(dw);
> > +	dw_edma_core_off(dw);
> >  
> >  	/* Free irqs */
> >  	for (i = (dw->nr_irqs - 1); i >= 0; i--)
> > diff --git a/drivers/dma/dw-edma/dw-edma-core.h b/drivers/dma/dw-edma/dw-edma-core.h
> > index 0ab2b6dba880..2555ae0e1b8b 100644
> > --- a/drivers/dma/dw-edma/dw-edma-core.h
> > +++ b/drivers/dma/dw-edma/dw-edma-core.h
> > @@ -111,6 +111,23 @@ struct dw_edma {
> >  	raw_spinlock_t			lock;		/* Only for legacy */
> >  
> >  	struct dw_edma_chip             *chip;
> > +
> > +	const struct dw_edma_core_ops	*core;
> > +};
> > +
> > +struct dw_edma_core_ops {
> > +	void (*off)(struct dw_edma *dw);
> > +	u16 (*ch_count)(struct dw_edma *dw, enum dw_edma_dir dir);
> > +	enum dma_status (*ch_status)(struct dw_edma_chan *chan);
> 
> > +	void (*clear_done_int)(struct dw_edma_chan *chan);
> > +	void (*clear_abort_int)(struct dw_edma_chan *chan);
> 
> As I noted above these methods could be called locally from the
> corresponding IP-core-specific module. Thus you won't need to define
> the callbacks. It shall simplify the interface a bit.
> 
> > +	void (*done_handle)(struct dw_edma_irq *dw_irq,
> > +			    enum dw_edma_dir dir);
> > +	void (*abort_handle)(struct dw_edma_irq *dw_irq,
> > +			     enum dw_edma_dir dir);
> 
> Seeing both of these callbacks (done,abort handlers) are called from
> the same IRQ-handler what about converting them to a single callback:
> irqreturn_t (*handle_int)(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir);
> ?
> The eDMA channels IRQ-handlers would look like this:
> --- a/drivers/dma/dw-edma/dw-edma-core.c
> +++ b/drivers/dma/dw-edma/dw-edma-core.c
> @@ -692,12 +692,16 @@ static irqreturn_t dw_edma_interrupt(int irq, void *data, bool write)
>  static inline irqreturn_t dw_edma_interrupt_write(int irq, void *data)
>  {
> -	return dw_edma_interrupt(irq, data, true);
> +	struct dw_edma_irq *dw_irq = data;
> +
> +	return dw_edma_core_handle_int(dw_irq, EDMA_DIR_WRITE);
>  }
>  
>  static inline irqreturn_t dw_edma_interrupt_read(int irq, void *data)
>  {
> -	return dw_edma_interrupt(irq, data, false);
> +	struct dw_edma_irq *dw_irq = data;
> +
> +	return dw_edma_core_handle_int(dw_irq, EDMA_DIR_READ);
>  }
>  
>  static irqreturn_t dw_edma_interrupt_common(int irq, void *data)
> 
> Therefore you'll be able to completely drop the
> static irqreturn_t dw_edma_interrupt(int irq, void *data, bool write)
> function from drivers/dma/dw-edma/dw-edma-core.c. The function body would
> be almost fully moved to the handle_int() function of the eDMA/HDMA
> core-specific ops.
> 
> For instance in case of the DW eDMA it would look like this:
> static irqreturn_t dw_edma_v0_core_handle_int(struct dw_edma_irq, enum dw_edma_dir dir)
> {
>         struct dw_edma *dw = dw_irq->dw;
>         unsigned long total, pos, val;
>         unsigned long off;
>         u32 mask;
> 
> 	if (dir == EDMA_DIR_WRITE) {
> 		total = dw->wr_ch_cnt;
> 		off = 0;
> 		mask = dw_irq->wr_mask;
> 	} else {
> 		total = dw->rd_ch_cnt;
> 		off = dw->wr_ch_cnt;
> 		mask = dw_irq->rd_mask;
> 	}
> 
> 	val = dw_edma_v0_core_status_done_int(dw, dir) & mask;
>         for_each_set_bit(pos, &val, total) {
>                 struct dw_edma_chan *chan = &dw->chan[pos + off];
> 
> 		dw_edma_v0_core_clear_done_int(chan);
> 
>                 dw_edma_done_interrupt(chan);
>         }
> 
>         val = dw_edma_v0_core_status_abort_int(dw, dir) & mask;
>         for_each_set_bit(pos, &val, total) {
>                 struct dw_edma_chan *chan = &dw->chan[pos + off];
> 
> 		dw_edma_v0_core_clear_abort_int(chan);
> 
>                 dw_edma_abort_interrupt(chan);
>         }
> 
>         return IRQ_HANDLED;
> }
> 
> What do you think?
> 
> > +	void (*start)(struct dw_edma_chunk *chunk, bool first);
> > +	void (*ch_config)(struct dw_edma_chan *chan);
> > +	void (*debugfs_on)(struct dw_edma *dw);
> >  };
> >  
> >  struct dw_edma_sg {
> > @@ -136,6 +153,9 @@ struct dw_edma_transfer {
> >  	enum dw_edma_xfer_type		type;
> >  };
> >  
> > +void dw_edma_done_interrupt(struct dw_edma_chan *chan);
> > +void dw_edma_abort_interrupt(struct dw_edma_chan *chan);
> > +
> >  static inline
> >  struct dw_edma_chan *vc2dw_edma_chan(struct virt_dma_chan *vc)
> >  {
> > @@ -148,4 +168,76 @@ struct dw_edma_chan *dchan2dw_edma_chan(struct dma_chan *dchan)
> >  	return vc2dw_edma_chan(to_virt_chan(dchan));
> >  }
> >  
> > +static inline
> > +void dw_edma_core_off(struct dw_edma *dw)
> > +{
> > +	dw->core->off(dw);
> > +}
> > +
> > +static inline
> > +u16 dw_edma_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> > +{
> > +	return dw->core->ch_count(dw, dir);
> > +}
> > +
> > +static inline
> > +enum dma_status dw_edma_core_ch_status(struct dw_edma_chan *chan)
> > +{
> > +	struct dw_edma *dw = chan->dw;
> > +
> > +	return dw->core->ch_status(chan);
> > +}
> > +
> > +static inline
> > +void dw_edma_core_clear_done_int(struct dw_edma_chan *chan)
> > +{
> > +	struct dw_edma *dw = chan->dw;
> > +
> > +	dw->core->clear_done_int(chan);
> > +}
> > +
> > +static inline
> > +void dw_edma_core_clear_abort_int(struct dw_edma_chan *chan)
> > +{
> > +	struct dw_edma *dw = chan->dw;
> > +
> > +	dw->core->clear_abort_int(chan);
> > +}
> > +
> 
> > +static inline
> > +void dw_edma_core_done_handle(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir)
> > +{
> > +	struct dw_edma *dw = dw_irq->dw;
> > +
> > +	dw->core->done_handle(dw_irq, dir);
> > +}
> > +
> > +static inline
> > +void dw_edma_core_abort_handle(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir)
> > +{
> > +	struct dw_edma *dw = dw_irq->dw;
> > +
> > +	dw->core->abort_handle(dw_irq, dir);
> > +}
> 
> As I suggested above these two methods can be replaced with a single
> one: dw_edma_core_handle_int(...).
> 
> > +
> > +static inline
> > +void dw_edma_core_start(struct dw_edma *dw, struct dw_edma_chunk *chunk, bool first)
> > +{
> > +	dw->core->start(chunk, first);
> > +}
> > +
> > +static inline
> > +void dw_edma_core_ch_config(struct dw_edma_chan *chan)
> > +{
> > +	struct dw_edma *dw = chan->dw;
> > +
> > +	dw->core->ch_config(chan);
> > +}
> > +
> > +static inline
> > +void dw_edma_core_debugfs_on(struct dw_edma *dw)
> > +{
> > +	dw->core->debugfs_on(dw);
> > +}
> > +
> >  #endif /* _DW_EDMA_CORE_H */
> > diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c
> > index 72e79a0c0a4e..73dcf72ba3a9 100644
> > --- a/drivers/dma/dw-edma/dw-edma-v0-core.c
> > +++ b/drivers/dma/dw-edma/dw-edma-v0-core.c
> > @@ -216,7 +216,7 @@ static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch,
> >  	readq_ch(dw, dir, ch, &(__dw_ch_regs(dw, dir, ch)->name))
> >  
> >  /* eDMA management callbacks */
> > -void dw_edma_v0_core_off(struct dw_edma *dw)
> > +static void dw_edma_v0_core_off(struct dw_edma *dw)
> >  {
> >  	SET_BOTH_32(dw, int_mask,
> >  		    EDMA_V0_DONE_INT_MASK | EDMA_V0_ABORT_INT_MASK);
> > @@ -225,7 +225,7 @@ void dw_edma_v0_core_off(struct dw_edma *dw)
> >  	SET_BOTH_32(dw, engine_en, 0);
> >  }
> >  
> > -u16 dw_edma_v0_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> > +static u16 dw_edma_v0_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> >  {
> >  	u32 num_ch;
> >  
> > @@ -242,7 +242,7 @@ u16 dw_edma_v0_core_ch_count(struct dw_edma *dw, enum dw_edma_dir dir)
> >  	return (u16)num_ch;
> >  }
> >  
> > -enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan)
> > +static enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan)
> >  {
> >  	struct dw_edma *dw = chan->dw;
> >  	u32 tmp;
> > @@ -258,7 +258,7 @@ enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan)
> >  		return DMA_ERROR;
> >  }
> >  
> > -void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan)
> > +static void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan)
> >  {
> >  	struct dw_edma *dw = chan->dw;
> >  
> > @@ -266,7 +266,7 @@ void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan)
> >  		  FIELD_PREP(EDMA_V0_DONE_INT_MASK, BIT(chan->id)));
> >  }
> >  
> > -void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan)
> > +static void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan)
> >  {
> >  	struct dw_edma *dw = chan->dw;
> >  
> > @@ -274,18 +274,66 @@ void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan)
> >  		  FIELD_PREP(EDMA_V0_ABORT_INT_MASK, BIT(chan->id)));
> >  }
> >  
> > -u32 dw_edma_v0_core_status_done_int(struct dw_edma *dw, enum dw_edma_dir dir)
> > +static u32 dw_edma_v0_core_status_done_int(struct dw_edma *dw, enum dw_edma_dir dir)
> >  {
> >  	return FIELD_GET(EDMA_V0_DONE_INT_MASK,
> >  			 GET_RW_32(dw, dir, int_status));
> >  }
> >  
> > -u32 dw_edma_v0_core_status_abort_int(struct dw_edma *dw, enum dw_edma_dir dir)
> > +static u32 dw_edma_v0_core_status_abort_int(struct dw_edma *dw, enum dw_edma_dir dir)
> >  {
> >  	return FIELD_GET(EDMA_V0_ABORT_INT_MASK,
> >  			 GET_RW_32(dw, dir, int_status));
> >  }
> >  
> > +static
> > +void dw_edma_v0_core_done_handle(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir)
> > +{
> > +	struct dw_edma *dw = dw_irq->dw;
> > +	unsigned long total, pos, val;
> > +	unsigned long off;
> > +	u32 mask;
> > +
> > +	if (dir == EDMA_DIR_WRITE) {
> > +		total = dw->wr_ch_cnt;
> > +		off = 0;
> > +		mask = dw_irq->wr_mask;
> > +	} else {
> > +		total = dw->rd_ch_cnt;
> > +		off = dw->wr_ch_cnt;
> > +		mask = dw_irq->rd_mask;
> > +	}
> > +
> > +	val = dw_edma_v0_core_status_done_int(dw, dir);
> > +	val &= mask;
> 
> > +	for_each_set_bit(pos, &val, total)
> > +		dw_edma_done_interrupt(&dw->chan[pos + off]);
> 
> As I suggested above replace this with:
> +	for_each_set_bit(pos, &val, total) {
> +		struct dw_edma_chan *chan = &dw->chan[pos + off];
> +
> + 		dw_edma_v0_core_clear_done_int(chan);
> + 
> +		dw_edma_done_interrupt(chan);
> + 	}
> 
> Therefore you'll be able to drop the clear_done_int callback and its
> invocation from the dw_edma_done_interrupt() function.
> 
> BTW Why did you change the dw_edma_v0_core_done_handle() semantics
> from taking the function pointers as an argument to calling the global
> version of dw_edma_done_interrupt() ?
In my patch, 'dw_edma_core_clear_done_int' is called by 'dw_edma_done_interrupt',

'dw_edma_core_clear_done_int' point to 'dw_edma_v0_core_clear_done_int'.

-static void dw_edma_done_interrupt(struct dw_edma_chan *chan)
+void dw_edma_done_interrupt(struct dw_edma_chan *chan)
 {
 	struct dw_edma_desc *desc;
 	struct virt_dma_desc *vd;
 	unsigned long flags;
 
-	dw_edma_v0_core_clear_done_int(chan);
+	dw_edma_core_clear_done_int(chan);


So, my patch only drop the callback params, like this in v2 patch
"dw_irq, dw_edma_done_interrupt, dir)"


-	for_each_set_bit(pos, &val, total) {
-		struct dw_edma_chan *chan = &dw->chan[pos + off];
+	enum dw_edma_dir dir = write ? EDMA_DIR_WRITE : EDMA_DIR_READ;

-		dw_edma_abort_interrupt(chan);
-	}
+	dw->core->dw_xdma_core_done_handle(dw_irq, dw_edma_done_interrupt, dir);
+	dw->core->dw_xdma_core_abort_handle(dw_irq, dw_edma_abort_interrupt, dir);


And I will fix it in next version.

Thanks,
Cai-
> 
> > +}
> > +
> > +static
> > +void dw_edma_v0_core_abort_handle(struct dw_edma_irq *dw_irq, enum dw_edma_dir dir)
> > +{
> > +	struct dw_edma *dw = dw_irq->dw;
> > +	unsigned long total, pos, val;
> > +	unsigned long off;
> > +	u32 mask;
> > +
> > +	if (dir == EDMA_DIR_WRITE) {
> > +		total = dw->wr_ch_cnt;
> > +		off = 0;
> > +		mask = dw_irq->wr_mask;
> > +	} else {
> > +		total = dw->rd_ch_cnt;
> > +		off = dw->wr_ch_cnt;
> > +		mask = dw_irq->rd_mask;
> > +	}
> > +
> > +	val = dw_edma_v0_core_status_abort_int(dw, dir);
> > +	val &= mask;
> 
> > +	for_each_set_bit(pos, &val, total)
> > +		dw_edma_abort_interrupt(&dw->chan[pos + off]);
> 
> ditto
> 
> > +}
> > +
> >  static void dw_edma_v0_write_ll_data(struct dw_edma_chunk *chunk, int i,
> >  				     u32 control, u32 size, u64 sar, u64 dar)
> >  {
> > @@ -356,7 +404,7 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
> >  	dw_edma_v0_write_ll_link(chunk, i, control, chunk->ll_region.paddr);
> >  }
> >  
> > -void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
> > +static void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
> >  {
> >  	struct dw_edma_chan *chan = chunk->chan;
> >  	struct dw_edma *dw = chan->dw;
> > @@ -427,7 +475,7 @@ void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
> >  		  FIELD_PREP(EDMA_V0_DOORBELL_CH_MASK, chan->id));
> >  }
> >  
> > -int dw_edma_v0_core_device_config(struct dw_edma_chan *chan)
> > +static void dw_edma_v0_core_ch_config(struct dw_edma_chan *chan)
> >  {
> >  	struct dw_edma *dw = chan->dw;
> >  	u32 tmp = 0;
> > @@ -494,12 +542,28 @@ int dw_edma_v0_core_device_config(struct dw_edma_chan *chan)
> >  		SET_RW_32(dw, chan->dir, ch67_imwr_data, tmp);
> >  		break;
> >  	}
> > -
> > -	return 0;
> >  }
> >  
> >  /* eDMA debugfs callbacks */
> > -void dw_edma_v0_core_debugfs_on(struct dw_edma *dw)
> > +static void dw_edma_v0_core_debugfs_on(struct dw_edma *dw)
> >  {
> >  	dw_edma_v0_debugfs_on(dw);
> >  }
> > +
> > +static const struct dw_edma_core_ops edma_core = {
> > +	.off = dw_edma_v0_core_off,
> > +	.ch_count = dw_edma_v0_core_ch_count,
> > +	.ch_status = dw_edma_v0_core_ch_status,
> 
> > +	.clear_done_int = dw_edma_v0_core_clear_done_int,
> > +	.clear_abort_int = dw_edma_v0_core_clear_abort_int,
> > +	.done_handle = dw_edma_v0_core_done_handle,
> > +	.abort_handle = dw_edma_v0_core_abort_handle,
> 
> If you take into account what I suggested above these four callbacks will
> be replaced with a single one handle_int. Thus the interface will look
> much simpler so will the whole IRQs-handling logic:
> 
> irq: dw_edma_interrupt_{write,read}()
>      +-> dw_edma_core_handle_int() (dw-edma-v0-core.c)
>          +-> dw_edma_v0_core_status_done_int() (dw-edma-v0-core.c)
>          +-> dw_edma_v0_core_clear_done_int() (dw-edma-v0-core.c)
>          +-> dw_edma_done_interrupt() (dw-edma-core.c)
>          +-> dw_edma_v0_core_status_abort_int() (dw-edma-v0-core.c)
>          +-> dw_edma_v0_core_clear_abort_int() (dw-edma-v0-core.c)
>          +-> dw_edma_abort_interrupt() (dw-edma-core.c)
> 
> In your case the calls hierarchy looks like this:
> irq: dw_edma_interrupt_{write,read}()
>      +-> dw_edma_interrupt()
>          +-> dw_edma_core_done_handle() (dw-edma-v0-core.c)
>              +-> dw_edma_v0_core_status_done_int() (dw-edma-v0-core.c)
>              +-> dw_edma_done_interrupt() (dw-edma-core.c)
>                  +-> dw_edma_core_clear_done_int() (dw-edma-v0-core.c)
>          +-> dw_edma_core_abort_handle() (dw-edma-v0-core.c)
>              +-> dw_edma_v0_core_status_abort_int() (dw-edma-v0-core.c)
>              +-> dw_edma_abort_interrupt() (dw-edma-core.c)
>                  +-> dw_edma_core_clear_abort_int() (dw-edma-v0-core.c)
> 
> See the calls thread is more linear in my case and the reader won't
> need to get several times back and forth between the generic part of
> the driver and the IP-core-specific one.
> 
> -Serge(y)
> 
> > +	.start = dw_edma_v0_core_start,
> > +	.ch_config = dw_edma_v0_core_ch_config,
> > +	.debugfs_on = dw_edma_v0_core_debugfs_on,
> > +};
> > +
> > +void dw_edma_v0_core_register(struct dw_edma *dw)
> > +{
> > +	dw->core = &edma_core;
> > +}
> > diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.h b/drivers/dma/dw-edma/dw-edma-v0-core.h
> > index ab96a1f48080..04a882222f99 100644
> > --- a/drivers/dma/dw-edma/dw-edma-v0-core.h
> > +++ b/drivers/dma/dw-edma/dw-edma-v0-core.h
> > @@ -11,17 +11,7 @@
> >  
> >  #include <linux/dma/edma.h>
> >  
> > -/* eDMA management callbacks */
> > -void dw_edma_v0_core_off(struct dw_edma *chan);
> > -u16 dw_edma_v0_core_ch_count(struct dw_edma *chan, enum dw_edma_dir dir);
> > -enum dma_status dw_edma_v0_core_ch_status(struct dw_edma_chan *chan);
> > -void dw_edma_v0_core_clear_done_int(struct dw_edma_chan *chan);
> > -void dw_edma_v0_core_clear_abort_int(struct dw_edma_chan *chan);
> > -u32 dw_edma_v0_core_status_done_int(struct dw_edma *chan, enum dw_edma_dir dir);
> > -u32 dw_edma_v0_core_status_abort_int(struct dw_edma *chan, enum dw_edma_dir dir);
> > -void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first);
> > -int dw_edma_v0_core_device_config(struct dw_edma_chan *chan);
> > -/* eDMA debug fs callbacks */
> > -void dw_edma_v0_core_debugfs_on(struct dw_edma *dw);
> > +/* eDMA core register */
> > +void dw_edma_v0_core_register(struct dw_edma *dw);
> >  
> >  #endif /* _DW_EDMA_V0_CORE_H */
> > -- 
> > 2.34.1
> > 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux