Re: [PATCH v3 10/11] PCI: microchip: Partition inbound address translation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[+CC Robin]

On Wed, Jan 11, 2023 at 12:53:22PM +0000, daire.mcnamara@xxxxxxxxxxxxx wrote:
> From: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
> 
> On Microchip PolarFire SoC the PCIe Root Port is behind a set of Fabric
> Interface Controller (FIC) buses that encapsulate buses like ABP/AHP,
> AXI-S, and AXI-M. Depending on which FIC(s) the Root Port is wired
> through to cpu space, the Root Port driver needs to take account of the
> address translation done by a parent (e.g. fabric) node before setting
> up its own inbound address translation tables from attached devices.
> 
> Parse the dma-range properties to determine how much address translation
> to perform in the Root Port and how much is being provided by the
> fabric.

Same reasoning as per patch (9), it requires some review from DT/DMA
maintainers.

Lorenzo

> 
> Signed-off-by: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
>  drivers/pci/controller/pcie-microchip-host.c | 178 ++++++++++++++++++-
>  1 file changed, 172 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c
> index f3dfcdf39c8a..2eb70fd01879 100644
> --- a/drivers/pci/controller/pcie-microchip-host.c
> +++ b/drivers/pci/controller/pcie-microchip-host.c
> @@ -22,6 +22,9 @@
>  /* Number of MSI IRQs */
>  #define MC_MAX_NUM_MSI_IRQS			32
>  
> +#define MC_MAX_NUM_INBOUND_WINDOWS		8
> +#define MC_ATT_MASK				GENMASK_ULL(63, 31)
> +
>  /* PCIe Bridge Phy and Controller Phy offsets */
>  #define MC_PCIE1_BRIDGE_ADDR			0x00008000u
>  #define MC_PCIE1_CTRL_ADDR			0x0000a000u
> @@ -86,10 +89,13 @@
>  #define ISTATUS_MSI				0x194
>  
>  #define ATR_WINDOW_DESC_SIZE			32
> -#define ATR_PCIE_ATR_SIZE			0x25
>  #define ATR_SIZE_SHIFT				1
>  #define ATR_IMPL_ENABLE				1
>  
> +#define ATR_PCIE_WIN0_SRCADDR			0x80000000
> +#define ATR_PCIE_ATR_SIZE			(512 * 1024 * 1024ul)
> +#define ATR_PCIE_NUM_WINDOWS			8
> +
>  /* PCIe Master table init defines */
>  #define ATR0_PCIE_WIN0_SRCADDR_PARAM		0x600u
>  #define ATR0_PCIE_WIN0_SRC_ADDR			0x604u
> @@ -278,6 +284,12 @@ struct mc_msi {
>  	DECLARE_BITMAP(used, MC_MAX_NUM_MSI_IRQS);
>  };
>  
> +struct inbound_windows {
> +	u64 axi_addr;
> +	u64 pci_addr;
> +	u64 size;
> +};
> +
>  struct mc_pcie {
>  	void __iomem *axi_base_addr;
>  	struct device *dev;
> @@ -286,6 +298,8 @@ struct mc_pcie {
>  	raw_spinlock_t lock;
>  	struct mc_msi msi;
>  	u64 outbound_range_offset;
> +	u32 num_inbound_windows;
> +	struct inbound_windows inbound_windows[MC_MAX_NUM_INBOUND_WINDOWS];
>  };
>  
>  struct cause {
> @@ -948,6 +962,43 @@ static int mc_pcie_init_irq_domains(struct mc_pcie *port)
>  	return mc_allocate_msi_domains(port);
>  }
>  
> +static int mc_pcie_setup_inbound_ranges(struct platform_device *pdev, struct mc_pcie *port)
> +{
> +	void __iomem *bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
> +	phys_addr_t pcie_addr;
> +	phys_addr_t axi_addr;
> +	u32 atr_size;
> +	u32 val;
> +	int i;
> +
> +	for (i = 0; i < port->num_inbound_windows; i++) {
> +		atr_size = ilog2(port->inbound_windows[i].size) - 1;
> +		atr_size &= GENMASK(5, 0);
> +
> +		pcie_addr = port->inbound_windows[i].pci_addr;
> +
> +		val = lower_32_bits(pcie_addr) & GENMASK(31, 12);
> +		val |= (atr_size << ATR_SIZE_SHIFT);
> +		val |= ATR_IMPL_ENABLE;
> +		writel(val, bridge_base_addr +
> +		       ATR0_PCIE_WIN0_SRCADDR_PARAM + (i * ATR_WINDOW_DESC_SIZE));
> +		writel(upper_32_bits(pcie_addr), bridge_base_addr +
> +		       ATR0_PCIE_WIN0_SRC_ADDR + (i * ATR_WINDOW_DESC_SIZE));
> +
> +		axi_addr = port->inbound_windows[i].axi_addr;
> +
> +		writel(lower_32_bits(axi_addr), bridge_base_addr +
> +		       ATR0_PCIE_WIN0_TRSL_ADDR_LSB + (i * ATR_WINDOW_DESC_SIZE));
> +		writel(upper_32_bits(axi_addr), bridge_base_addr +
> +		       ATR0_PCIE_WIN0_TRSL_ADDR_UDW + (i * ATR_WINDOW_DESC_SIZE));
> +
> +		writel(TRSL_ID_AXI4_MASTER_0, bridge_base_addr +
> +		       ATR0_PCIE_WIN0_TRSL_PARAM + (i * ATR_WINDOW_DESC_SIZE));
> +	}
> +
> +	return 0;
> +}
> +
>  static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>  				 phys_addr_t axi_addr, phys_addr_t pci_addr,
>  				 size_t size)
> @@ -979,11 +1030,6 @@ static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>  	val = upper_32_bits(pci_addr);
>  	writel(val, bridge_base_addr + (index * ATR_WINDOW_DESC_SIZE) +
>  	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
> -
> -	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> -	val |= (ATR_PCIE_ATR_SIZE << ATR_SIZE_SHIFT);
> -	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
> -	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
>  }
>  
>  static int mc_pcie_setup_windows(struct platform_device *pdev,
> @@ -1163,6 +1209,116 @@ static int mc_check_for_parent_range_handling(struct platform_device *pdev, stru
>  	return 0;
>  }
>  
> +static int mc_check_for_parent_dma_range_handling(struct platform_device *pdev,
> +						  struct mc_pcie *port)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *dn = dev->of_node;
> +	struct of_range_parser parser;
> +	struct of_range range;
> +	int num_parent_ranges = 0;
> +	int num_ranges = 0;
> +	struct inbound_windows ranges[MC_MAX_NUM_INBOUND_WINDOWS] = { 0 };
> +	u64 start_axi = GENMASK_ULL(63, 0);
> +	u64 end_axi = 0;
> +	u64 start_pci = GENMASK_ULL(63, 0);
> +	s64 size;
> +	u64 window_size;
> +	int i;
> +
> +	/* Find all dma-ranges */
> +	if (of_pci_dma_range_parser_init(&parser, dn)) {
> +		dev_err(dev, "missing dma-ranges property\n");
> +		return -EINVAL;
> +	}
> +
> +	for_each_of_range(&parser, &range) {
> +		if (num_ranges > MC_MAX_NUM_INBOUND_WINDOWS) {
> +			dev_err(dev, "too many inbound ranges; %d available tables\n",
> +				MC_MAX_NUM_INBOUND_WINDOWS);
> +			return -EINVAL;
> +		}
> +		ranges[num_ranges].axi_addr = range.cpu_addr;
> +		ranges[num_ranges].pci_addr = range.pci_addr;
> +		ranges[num_ranges].size = range.size;
> +
> +		num_ranges++;
> +	}
> +
> +	/*
> +	 * Check for one level up; will need to adjust address translation
> +	 * tables for these
> +	 */
> +	dn = of_get_parent(dn);
> +	if (dn) {
> +		of_pci_dma_range_parser_init(&parser, dn);
> +
> +		for_each_of_range(&parser, &range) {
> +			if (num_parent_ranges > MC_MAX_NUM_INBOUND_WINDOWS) {
> +				dev_err(dev, "too many parent inbound ranges; %d available tables\n",
> +					MC_MAX_NUM_INBOUND_WINDOWS);
> +				return -EINVAL;
> +			}
> +			ranges[num_parent_ranges].axi_addr = range.pci_addr;
> +			num_parent_ranges++;
> +		}
> +	}
> +
> +	if (num_parent_ranges) {
> +		if (num_ranges != num_parent_ranges) {
> +			dev_err(dev, "num parent inbound ranges must be 0 or match num inbound ranges\n");
> +			return -EINVAL;
> +		}
> +	}
> +
> +	/* Merge ranges */
> +	for (i = 0; i < num_ranges; i++) {
> +		struct inbound_windows *range = &ranges[i];
> +
> +		if (range->axi_addr < start_axi) {
> +			start_axi = range->axi_addr;
> +			start_pci = range->pci_addr;
> +		}
> +
> +		if (range->axi_addr + range->size > end_axi)
> +			end_axi = range->axi_addr + range->size;
> +	}
> +
> +	/* Move starts back as far as possible */
> +	start_axi &= MC_ATT_MASK;
> +	start_pci &= MC_ATT_MASK;
> +
> +	/* Adjust size to take account of that change */
> +	size = end_axi - start_axi;
> +
> +	/* May need to adjust size up to the next largest power of 2 */
> +	if (size < 1ull << ilog2(size))
> +		size = 1ull << (ilog2(size) + 1);
> +
> +	window_size = 1ull << (ilog2(size) - 1);
> +
> +	/* Divide merged range into windows */
> +	i = 0;
> +	while (size > 0 && i < MC_MAX_NUM_INBOUND_WINDOWS) {
> +		port->inbound_windows[i].axi_addr = start_axi;
> +		port->inbound_windows[i].pci_addr = start_pci;
> +		port->inbound_windows[i].size = window_size;
> +
> +		size -= window_size;
> +		start_axi += window_size;
> +		start_pci += window_size;
> +		i++;
> +		port->num_inbound_windows = i;
> +	}
> +
> +	if (size < 0) {
> +		dev_err(dev, "insufficient windows to map inbound ranges\n");
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
>  static int mc_platform_init(struct pci_config_window *cfg)
>  {
>  	struct device *dev = cfg->parent;
> @@ -1180,6 +1336,11 @@ static int mc_platform_init(struct pci_config_window *cfg)
>  	if (ret)
>  		return ret;
>  
> +	/* And similarly, check for inbound address translation */
> +	ret = mc_check_for_parent_dma_range_handling(pdev, port);
> +	if (ret)
> +		return ret;
> +
>  	/* Configure address translation table 0 for PCIe config space */
>  	mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start - port->outbound_range_offset,
>  			     cfg->res.start - port->outbound_range_offset,
> @@ -1193,6 +1354,11 @@ static int mc_platform_init(struct pci_config_window *cfg)
>  	if (ret)
>  		return ret;
>  
> +	/* Configure inbound translation tables */
> +	ret = mc_pcie_setup_inbound_ranges(pdev, port);
> +	if (ret)
> +		return ret;
> +
>  	/* Address translation is up; safe to enable interrupts */
>  	ret = mc_init_interrupts(pdev, port);
>  	if (ret)
> -- 
> 2.25.1
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux