The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx> --- This patchset relies on the following patchset: https://lore.kernel.org/all/20230117224148.1914627-1-abel.vesa@xxxxxxxxxx/ The v4 of this patch is: https://lore.kernel.org/all/20230119140453.3942340-8-abel.vesa@xxxxxxxxxx/ Changes since v4: * none Changes since v3: * none Changes since v2: * none Changes since v1: * split all the offsets into separate patches, like Vinod suggested .../phy-qcom-qmp-qserdes-ln-shrd-v6.h | 32 +++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp.h | 1 + 2 files changed, 33 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h new file mode 100644 index 000000000000..86d7d796d5d7 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_ +#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_ + +#define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL 0xa0 +#define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES 0xb0 +#define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1 0xb4 +#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1 0xc4 +#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2 0xc8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0 0xd4 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1 0xd8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2 0xdc +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3 0xe0 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4 0xe4 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5 0xe8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6 0xec +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210 0xf0 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3 0xf4 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210 0xf8 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3 0xfc +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210 0x100 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3 0x104 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3 0x10c +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3 0x114 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3 0x11c +#define QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE 0x128 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index e5974e6caf51..148663ee713a 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -24,6 +24,7 @@ #include "phy-qcom-qmp-qserdes-com-v6.h" #include "phy-qcom-qmp-qserdes-txrx-v6.h" #include "phy-qcom-qmp-qserdes-txrx-v6_20.h" +#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h" #include "phy-qcom-qmp-qserdes-pll.h" -- 2.34.1
