Re: [PATCH v9 08/27] dmaengine: dw-edma: Add PCIe bus address getter to the remote EP glue-driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jan 13, 2023 at 08:13:50PM +0300, Serge Semin wrote:
> In general the Synopsys PCIe EndPoint IP prototype kit can be attached to
> a PCIe bus with any PCIe Host controller including to the one with
> distinctive from CPU address space. Due to that we need to make sure that
> the source and destination addresses of the DMA-slave devices are properly
> converted to the PCIe bus address space, otherwise the DMA transaction
> will not only work as expected, but may cause the memory corruption with
> subsequent system crash. Let's do that by introducing a new
> dw_edma_pcie_address() method defined in the dw-edma-pcie.c, which will
> perform the denoted translation by using the pcibios_resource_to_bus()
> method.
> 
> Fixes: 41aaff2a2ac0 ("dmaengine: Add Synopsys eDMA IP PCIe glue-logic")
> Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> Acked-by: Vinod Koul <vkoul@xxxxxxxxxx>
> 
> ---
> 
> Note this patch depends on the patch "dmaengine: dw-edma: Add CPU to PCIe
> bus address translation" from this series.
> ---
>  drivers/dma/dw-edma/dw-edma-pcie.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/dma/dw-edma/dw-edma-pcie.c b/drivers/dma/dw-edma/dw-edma-pcie.c
> index 04c95cba1244..f530bacfd716 100644
> --- a/drivers/dma/dw-edma/dw-edma-pcie.c
> +++ b/drivers/dma/dw-edma/dw-edma-pcie.c
> @@ -95,8 +95,23 @@ static int dw_edma_pcie_irq_vector(struct device *dev, unsigned int nr)
>  	return pci_irq_vector(to_pci_dev(dev), nr);
>  }
>  
> +static u64 dw_edma_pcie_address(struct device *dev, phys_addr_t cpu_addr)
> +{
> +	struct pci_dev *pdev = to_pci_dev(dev);
> +	struct pci_bus_region region;
> +	struct resource res = {
> +		.flags = IORESOURCE_MEM,
> +		.start = cpu_addr,
> +		.end = cpu_addr,
> +	};
> +
> +	pcibios_resource_to_bus(pdev->bus, &region, &res);
> +	return region.start;
> +}

This doesn't look DW-specific.  Do you expect other implementations
that are specific, or could this be a generic function that shares
some implementation with pci_bus_address()?

>  static const struct dw_edma_core_ops dw_edma_pcie_core_ops = {
>  	.irq_vector = dw_edma_pcie_irq_vector,
> +	.pci_address = dw_edma_pcie_address,
>  };
>  
>  static void dw_edma_pcie_get_vsec_dma_data(struct pci_dev *pdev,
> -- 
> 2.39.0
> 
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux