From: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
Continuing to use pci_host_common_probe() for the PCIe Root Complex on
PolarFire SoC was leading to an extremely large _init() function and
some unnatural code flow. Re-partition so some tasks are done in
a _probe() routine, which calls pci_host_common_probe() and then use a
much smaller _init() function, mainly to enable interrupts after address
translation tables are set up.
Signed-off-by: Daire McNamara <daire.mcnamara@xxxxxxxxxxxxx>
Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
drivers/pci/controller/pcie-microchip-host.c | 55 ++++++++++++++------
1 file changed, 38 insertions(+), 17 deletions(-)
diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c
index 9ff0fb04b953..c55911c48ec6 100644
--- a/drivers/pci/controller/pcie-microchip-host.c
+++ b/drivers/pci/controller/pcie-microchip-host.c
@@ -383,6 +383,8 @@ static struct {
static char poss_clks[][5] = { "fic0", "fic1", "fic2", "fic3" };
+static struct mc_pcie *port;
+
static void mc_pcie_fixup_ecam(struct mc_pcie *port, void __iomem *ecam)
{
struct mc_msi *msi = &port->msi;
@@ -1111,7 +1113,34 @@ static int mc_platform_init(struct pci_config_window *cfg)
{
struct device *dev = cfg->parent;
struct platform_device *pdev = to_platform_device(dev);
- struct mc_pcie *port;
+ void __iomem *bridge_base_addr =
+ port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
+ int ret;
+
+ /* Configure address translation table 0 for PCIe config space */
+ mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
+ cfg->res.start,
+ resource_size(&cfg->res));
+
+ /* Need some fixups in config space */
+ mc_pcie_fixup_ecam(port, cfg->win);
+
+ /* Configure non-config space outbound ranges */
+ ret = mc_pcie_setup_windows(pdev, port);
+ if (ret)
+ return ret;
+
+ /* Address translation is up; safe to enable interrupts */
+ ret = mc_init_interrupts(pdev, port);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mc_host_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
void __iomem *bridge_base_addr;
int ret;
u32 val;
@@ -1119,13 +1148,8 @@ static int mc_platform_init(struct pci_config_window *cfg)
port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
if (!port)
return -ENOMEM;
- port->dev = dev;
- ret = mc_pcie_init_clks(dev);
- if (ret) {
- dev_err(dev, "failed to get clock resources, error %d\n", ret);
- return -ENODEV;
- }
+ port->dev = dev;
port->axi_base_addr = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(port->axi_base_addr))
@@ -1150,16 +1174,13 @@ static int mc_platform_init(struct pci_config_window *cfg)
/* Pick vector address from design */
port->msi.vector_phy = readl_relaxed(bridge_base_addr + IMSI_ADDR);
- /* Configure Address Translation Table 0 for PCIe config space */
- mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start & 0xffffffff,
- cfg->res.start, resource_size(&cfg->res));
-
- ret = mc_pcie_setup_windows(pdev, port);
- if (ret)
- return ret;
+ ret = mc_pcie_init_clks(dev);
+ if (ret) {
+ dev_err(dev, "failed to get clock resources, error %d\n", ret);
+ return -ENODEV;
+ }
- /* Address translation is up; safe to enable interrupts */
- return mc_init_interrupts(pdev, port);
+ return pci_host_common_probe(pdev);
}
static const struct pci_ecam_ops mc_ecam_ops = {
@@ -1182,7 +1203,7 @@ static const struct of_device_id mc_pcie_of_match[] = {
MODULE_DEVICE_TABLE(of, mc_pcie_of_match);
static struct platform_driver mc_pcie_driver = {
- .probe = pci_host_common_probe,
+ .probe = mc_host_probe,
.driver = {
.name = "microchip-pcie",
.of_match_table = mc_pcie_of_match,
--
2.25.1
