On 2.01.2023 11:58, Manivannan Sadhasivam wrote:
> Both PCIe0 and PCIe1 controllers are capable of signalling the MSIs
> received from endpoint devices to the CPU using GIC-ITS MSI controller.
> Add support for it.
>
> Currently, BDF (0:0.0) and BDF (1:0.0) are enabled and with the
> msi-map-mask of 0xff00, all the 32 devices under these two busses can
> share the same Device ID.
>
> The GIC-ITS MSI implementation provides an advantage over internal MSI
> implementation using Locality-specific Peripheral Interrupts (LPI) that
> would allow MSIs to be targeted for each CPU core.
>
> It should be noted that the MSIs for BDF (1:0.0) only works with Device
> ID of 0x5980 and 0x5a00. Hence, the IDs are swapped.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> ---
Tested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> # Xperia 1 IV (WCN6855)
Konrad
> arch/arm64/boot/dts/qcom/sm8450.dtsi | 20 ++++++++++++++------
> 1 file changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 570475040d95..c4dd5838fac6 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -1733,9 +1733,13 @@ pcie0: pci@1c00000 {
> ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
> <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
>
> - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "msi";
> - #interrupt-cells = <1>;
> + /*
> + * MSIs for BDF (1:0.0) only works with Device ID 0x5980.
> + * Hence, the IDs are swapped.
> + */
> + msi-map = <0x0 &gic_its 0x5981 0x1>,
> + <0x100 &gic_its 0x5980 0x1>;
> + msi-map-mask = <0xff00>;
> interrupt-map-mask = <0 0 0 0x7>;
> interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> @@ -1842,9 +1846,13 @@ pcie1: pci@1c08000 {
> ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>,
> <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>;
>
> - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "msi";
> - #interrupt-cells = <1>;
> + /*
> + * MSIs for BDF (1:0.0) only works with Device ID 0x5a00.
> + * Hence, the IDs are swapped.
> + */
> + msi-map = <0x0 &gic_its 0x5a01 0x1>,
> + <0x100 &gic_its 0x5a00 0x1>;
> + msi-map-mask = <0xff00>;
> interrupt-map-mask = <0 0 0 0x7>;
> interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
