Hi Jesse, The following patch fixes a regression introduced when an SRIOV card is used as a PF in a 64k base page size configuration. Reference: https://lkml.org/lkml/2012/2/1/165 Please queue this bugfix patch for the current release cycle. Thanks, Vaidy --- pci: set pci sriov page size before reading SRIOV BAR For an SRIOV device, PCI_SRIOV_SYS_PGSIZE should be set before the PCI_SRIOV_BAR are queried. The sys pagesize defaults to 4k, so this change is required on powerpc box with 64k base page size. This is a regression caused due to moving SRIOV init to sriov_enable(). | commit afd24ece5c76af87f6fc477f2747b83a764f161c | Author: Ram Pai <linuxram@xxxxxxxxxx> | PCI: delay configuration of SRIOV capability | The SRIOV capability, namely page size and total_vfs of a device are | configured during enumeration phase of the device. This can potentially | interfere with the PCI operations of the platform, if the IOV capability | of the device is not enabled. Signed-off-by: Vaidyanathan Srinivasan <svaidy@xxxxxxxxxxxxxxxxxx> Acked-by: Ram Pai <linuxram@xxxxxxxxxx> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index 0321fa3..0dab5ec 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -347,8 +347,6 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) return rc; } - pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz); - iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE; pci_cfg_access_lock(dev); pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); @@ -466,6 +464,7 @@ found: return -EIO; pgsz &= ~(pgsz - 1); + pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz); nres = 0; for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
