Hi Zhuo,
On Wed, Sep 28, 2022 at 06:59:45PM +0800, Zhuo Chen wrote:
> When state is pci_channel_io_frozen in pcie_do_recovery(), the
> severity is fatal and fatal error status should be cleared.
> So add pci_aer_clear_fatal_status().
>
> Signed-off-by: Zhuo Chen <chenzhuo.1@xxxxxxxxxxxxx>
> ---
> drivers/pci/pcie/err.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index f80b21244ef1..b46f1d36c090 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -241,7 +241,10 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
> pci_walk_bridge(bridge, report_resume, &status);
>
> pcie_clear_device_status(dev);
> - pci_aer_clear_nonfatal_status(dev);
> + if (state == pci_channel_io_frozen)
> + pci_aer_clear_fatal_status(dev);
> + else
> + pci_aer_clear_nonfatal_status(dev);
I'm confused. It seems like we certainly need to clear fatal errors
after they occur *somewhere*, and if we don't, surely this would be a
very obvious issue. But you didn't mention this being a bug fix, so I
assume it's more of a cleanup.
If it *is* a bug fix, please say that and give a hint about what the
bug looks like, e.g., what sort of messages a user might see.
If it's not a bug fix, I don't understand how AER fatal errors get
cleared today. The PCI_ERR_UNCOR_STATUS bits are sticky, so they're
not cleared by a reset. In the current tree, these are the only
places I see that clear AER fatal errors:
pci_init_capabilities
pci_aer_init # once at device enumeration
pci_aer_clear_status
pci_aer_raw_clear_status
pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, status)
aer_probe
aer_enable_rootport # once at Root Port enumeration
pci_write_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS, reg32)
dpc_process_error # after DPC triggered
pci_aer_clear_fatal_status
pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, status)
edr_handle_event # after EDR event
pci_aer_raw_clear_status
pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, status)
pci_restore_state # after reset or PM sleep/resume
pci_aer_clear_status
pci_aer_raw_clear_status
pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS, status)
The only one that could clear errors after an AER error (not DPC or
EDR), would be the pci_restore_state() in the reset path. If the
current code relies on that, I'd say that's a pretty non-obvious
dependency.
> pci_info(bridge, "device recovery successful\n");
> return status;
> --
> 2.30.1 (Apple Git-130)
>
