Re: [RESEND PATCH RFC V4 2/3] PCI: Create device tree node for selected devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/1/22 13:12, Rob Herring wrote:
On Mon, Nov 21, 2022 at 08:43:03AM -0800, Lizhi Hou wrote:
The PCI endpoint device such as Xilinx Alveo PCI card maps the register
spaces from multiple hardware peripherals to its PCI BAR. Normally,
the PCI core discovers devices and BARs using the PCI enumeration process.
There is no infrastructure to discover the hardware peripherals that are
present in a PCI device, and which can be accessed through the PCI BARs.

For Alveo PCI card, the card firmware provides a flattened device tree to
describe the hardware peripherals on its BARs. The Alveo card driver can
load this flattened device tree and leverage device tree framework to
generate platform devices for the hardware peripherals eventually.

Apparently, the device tree framework requires a device tree node for the
PCI device. Thus, it can generate the device tree nodes for hardware
peripherals underneath. Because PCI is self discoverable bus, there might
not be a device tree node created for PCI devices. This patch is to add
support to generate device tree node for PCI devices.

Added a kernel option. When the option is turned on, the kernel will
generate device tree nodes for PCI bridges unconditionally.

Initially, the basic properties are added for the dynamically generated
device tree nodes.

Signed-off-by: Lizhi Hou <lizhi.hou@xxxxxxx>
Signed-off-by: Sonal Santan <sonal.santan@xxxxxxx>
Signed-off-by: Max Zhen <max.zhen@xxxxxxx>
Reviewed-by: Brian Xu <brian.xu@xxxxxxx>
---
  drivers/pci/Kconfig         |  12 ++
  drivers/pci/Makefile        |   1 +
  drivers/pci/bus.c           |   2 +
  drivers/pci/msi/irqdomain.c |   6 +-
  drivers/pci/of.c            |  71 ++++++++++
  drivers/pci/of_property.c   | 256 ++++++++++++++++++++++++++++++++++++
  drivers/pci/pci-driver.c    |   3 +-
  drivers/pci/pci.h           |  19 +++
  drivers/pci/remove.c        |   1 +
  9 files changed, 368 insertions(+), 3 deletions(-)
  create mode 100644 drivers/pci/of_property.c

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 55c028af4bd9..126c31b79718 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -198,6 +198,18 @@ config PCI_HYPERV
  	  The PCI device frontend driver allows the kernel to import arbitrary
  	  PCI devices from a PCI backend to support PCI driver domains.
+config PCI_DYNAMIC_OF_NODES
+	bool "Device tree node for PCI devices"
Create Devicetree nodes for PCI devices
Sure.

But as I've said before, making this a config option doesn't really work
except as something to experiment with. Once you add your driver and
want to do a 'select PCI_DYNAMIC_OF_NODES', you've affected everyone
else.

Do you mean we should remove PCI_DYNAMIC_OF_NODES and make

creating dynamic tree node default?

Based on the previous discussions, the approach I am implementing

is to create device tree nodes for all PCI bridges and devices defined

by pci quirks. I believe a PCI endpoint which is not defined by PCI quirks

should not to be affected because there is no device tree node is created

for it.

Are you fine with this approach?


+	depends on OF
+	select OF_DYNAMIC
+	help
+	  This option enables support for generating device tree nodes for some
+	  PCI devices. Thus, the driver of this kind can load and overlay
+	  flattened device tree for its downstream devices.
+
+	  Once this option is selected, the device tree nodes will be generated
+	  for all PCI bridges.
+
  choice
  	prompt "PCI Express hierarchy optimization setting"
  	default PCIE_BUS_DEFAULT
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 2680e4c92f0a..cc8b4e01e29d 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_P2PDMA)	+= p2pdma.o
  obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
  obj-$(CONFIG_VGA_ARB)		+= vgaarb.o
  obj-$(CONFIG_PCI_DOE)		+= doe.o
+obj-$(CONFIG_PCI_DYNAMIC_OF_NODES) += of_property.o
# Endpoint library must be initialized before its users
  obj-$(CONFIG_PCI_ENDPOINT)	+= endpoint/
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 3cef835b375f..8507cc32b61d 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -316,6 +316,8 @@ void pci_bus_add_device(struct pci_dev *dev)
  	 */
  	pcibios_bus_add_device(dev);
  	pci_fixup_device(pci_fixup_final, dev);
+	if (pci_is_bridge(dev))
+		of_pci_make_dev_node(dev);
  	pci_create_sysfs_dev_files(dev);
  	pci_proc_attach_device(dev);
  	pci_bridge_d3_update(dev);
diff --git a/drivers/pci/msi/irqdomain.c b/drivers/pci/msi/irqdomain.c
index e9cf318e6670..eeaf44169bfd 100644
--- a/drivers/pci/msi/irqdomain.c
+++ b/drivers/pci/msi/irqdomain.c
@@ -230,8 +230,10 @@ u32 pci_msi_domain_get_msi_rid(struct irq_domain *domain, struct pci_dev *pdev)
  	pci_for_each_dma_alias(pdev, get_msi_id_cb, &rid);
of_node = irq_domain_get_of_node(domain);
-	rid = of_node ? of_msi_map_id(&pdev->dev, of_node, rid) :
-			iort_msi_map_id(&pdev->dev, rid);
+	if (of_node && !of_node_check_flag(of_node, OF_DYNAMIC))
+		rid = of_msi_map_id(&pdev->dev, of_node, rid);
+	else
+		rid = iort_msi_map_id(&pdev->dev, rid);
I have no idea if this works. It looks kind of broken already if
!of_node calls iort_msi_map_id(). With a DT only system, I would think
we'd always call of_msi_map_id(). Have you tested MSIs?

With a mixed system, I have no idea what happens. That needs to be
understood for MSI, DMA, and interrupts.

Yes, I tested MSI in VM.

# cat /sys/devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/0000:09:00.0/0000:0a:00.0/msi_irqs/29

msi
# cat /proc/interrupts | grep 29
 29:          1          0       MSI 5242880 Edge      pciehp

The idea is to preserve the current behaviror.

      current: PCI device does not have dt node, thus iort_msi_map_id() is called.

      modified code: PCI device has dt node but with OF_DYNAMIC flag, thus  iort_msi_map_id() is called.

I was planning to take on of_msi_map_id() for dynamically generated dt node

in future when we see a real use case?


return rid;
  }
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index 196834ed44fe..fb60b04f0b93 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -469,6 +469,8 @@ static int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *
  		} else {
  			/* We found a P2P bridge, check if it has a node */
  			ppnode = pci_device_to_OF_node(ppdev);
+			if (of_node_check_flag(ppnode, OF_DYNAMIC))
+				ppnode = NULL;
  		}
/*
@@ -599,6 +601,75 @@ int devm_of_pci_bridge_init(struct device *dev, struct pci_host_bridge *bridge)
  	return pci_parse_request_of_pci_ranges(dev, bridge);
  }
+#if IS_ENABLED(CONFIG_PCI_DYNAMIC_OF_NODES)
+
+void of_pci_remove_node(struct pci_dev *pdev)
+{
+	struct device_node *dt_node;
node or np are the typical names.
Will fix this.

+
+	dt_node = pci_device_to_OF_node(pdev);
+	if (!dt_node || !of_node_check_flag(dt_node, OF_DYNAMIC))
+		return;
+	pdev->dev.of_node = NULL;
+
+	of_destroy_node(dt_node);
+}
+
+void of_pci_make_dev_node(struct pci_dev *pdev)
+{
+	struct device_node *parent, *dt_node = NULL;
+	const char *pci_type = "dev";
+	struct of_changeset *cset;
+	const char *full_name;
+	int ret;
+
+	/*
+	 * If there is already a device tree node linked to this device,
+	 * return immediately.
+	 */
+	if (pci_device_to_OF_node(pdev))
+		return;
+
+	/* Check if there is device tree node for parent device */
+	if (!pdev->bus->self)
+		parent = pdev->bus->dev.of_node;
+	else
+		parent = pdev->bus->self->dev.of_node;
+	if (!parent)
+		return;
+
+	if (pci_is_bridge(pdev))
+		pci_type = "pci";
What's the node name if not a bridge? I don't see how that would work.

It should depend on the device class if it has one.

pci_type is initialized with "dev"

+    const char *pci_type = "dev";

Do you mean I should use class instead of pci_is_bridge()?

if ((pdev->class >> 24) == PCI_BASE_CLASS_BRIDGE)
    pci_type = "pci";


+
+	full_name = kasprintf(GFP_KERNEL, "%pOF/%s@%x,%x", parent, pci_type,
+			      PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
'full_name' in the DT code is historical. It's not storing the full path
now. It's just 'name' with the unit-address. So why does
of_create_node() need the full path?

ok. I did not know full_name is historical. I will use 'name' next time.


+	if (!full_name)
+		goto failed;
+
+	dt_node = of_create_node(parent, full_name, &cset);
+	if (!dt_node)
+		goto failed;
+	kfree(full_name);
+
+	ret = of_pci_add_properties(pdev, cset, dt_node);
+	if (ret)
+		goto failed;
+
+	ret = of_changeset_apply(cset);
+	if (ret)
+		goto failed;
+
+	pdev->dev.of_node = dt_node;
+
+	return;
+
+failed:
+	if (dt_node)
+		of_destroy_node(dt_node);
+	kfree(full_name);
+}
+#endif
+
  #endif /* CONFIG_PCI */
/**
diff --git a/drivers/pci/of_property.c b/drivers/pci/of_property.c
new file mode 100644
index 000000000000..cc66fa7517e0
--- /dev/null
+++ b/drivers/pci/of_property.c
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0+
GPL-2.0-only
Got it. Thanks.

+/*
+ * Copyright (C) 2022, Advanced Micro Devices, Inc.
+ */
+
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include "pci.h"
+
+struct of_pci_addr_pair {
+	__be32		phys_hi;
+	__be32		phys_mid;
+	__be32		phys_lo;
+	__be32		size_hi;
+	__be32		size_lo;
+};
+
+struct of_pci_range {
+	__be32		child_addr_hi;
+	__be32		child_addr_mid;
+	__be32		child_addr_lo;
+	__be32		parent_addr_hi;
+	__be32		parent_addr_mid;
+	__be32		parent_addr_lo;
+	__be32		size_hi;
+	__be32		size_lo;
+};
+
+#define OF_PCI_ADDR_SPACE_CONFIG	0x0
+#define OF_PCI_ADDR_SPACE_IO		0x1
+#define OF_PCI_ADDR_SPACE_MEM32		0x2
+#define OF_PCI_ADDR_SPACE_MEM64		0x3
+
+#define OF_PCI_ADDR_FIELD_NONRELOC	BIT(31)
+#define OF_PCI_ADDR_FIELD_SS		GENMASK(25, 24)
+#define OF_PCI_ADDR_FIELD_PREFETCH	BIT(30)
+#define OF_PCI_ADDR_FIELD_BUS		GENMASK(23, 16)
+#define OF_PCI_ADDR_FIELD_DEV		GENMASK(15, 11)
+#define OF_PCI_ADDR_FIELD_FUNC		GENMASK(10, 8)
+#define OF_PCI_ADDR_FIELD_REG		GENMASK(7, 0)
+
+#define OF_PCI_ADDR_HI			GENMASK_ULL(63, 32)
+#define OF_PCI_ADDR_LO			GENMASK_ULL(31, 0)
+#define OF_PCI_SIZE_HI			GENMASK_ULL(63, 32)
+#define OF_PCI_SIZE_LO			GENMASK_ULL(31, 0)
+
+#define OF_PCI_ADDRESS_CELLS		3
+#define OF_PCI_SIZE_CELLS		2
+
+enum of_pci_prop_compatible {
+	PROP_COMPAT_PCI_VVVV_DDDD,
+	PROP_COMPAT_PCICLASS_CCSSPP,
+	PROP_COMPAT_PCICLASS_CCSS,
+	PROP_COMPAT_NUM,
+};
+
+static int of_pci_prop_device_type(struct pci_dev *pdev,
+				   struct of_changeset *ocs,
+				   struct device_node *np)
+{
+	return of_changeset_add_prop_string(ocs, np, "device_type", "pci");
+}
+
+static int of_pci_prop_address_cells(struct pci_dev *pdev,
+				     struct of_changeset *ocs,
+				     struct device_node *np)
+{
+	return of_changeset_add_prop_u32(ocs, np, "#address_cells",
+					 OF_PCI_ADDRESS_CELLS);
+}
+
+static int of_pci_prop_size_cells(struct pci_dev *pdev,
+				  struct of_changeset *ocs,
+				  struct device_node *np)
+{
+	return of_changeset_add_prop_u32(ocs, np, "#size_cells",
+					 OF_PCI_SIZE_CELLS);
+}
+
+static int of_pci_set_addr_flags(struct resource *res, u32 *addr_hi)
+{
+	u32 ss;
+
+	if (res->flags & IORESOURCE_IO)
+		ss = OF_PCI_ADDR_SPACE_IO;
+	else if (res->flags & IORESOURCE_MEM_64)
+		ss = OF_PCI_ADDR_SPACE_MEM64;
+	else if (res->flags & IORESOURCE_MEM)
+		ss = OF_PCI_ADDR_SPACE_MEM32;
+	else
+		return -EINVAL;
+
+	*addr_hi &= ~(OF_PCI_ADDR_FIELD_SS | OF_PCI_ADDR_FIELD_PREFETCH);
+	if (res->flags & IORESOURCE_PREFETCH)
+		*addr_hi |= OF_PCI_ADDR_FIELD_PREFETCH;
+
+	*addr_hi |= ss;
+
+	return 0;
+}
+
+static int of_pci_prop_ranges(struct pci_dev *pdev, struct of_changeset *ocs,
+			      struct device_node *np)
+{
+	struct of_pci_range rp[PCI_BRIDGE_RESOURCE_NUM];
+	struct resource *res;
+	int i = 0, j, ret;
+	u64 val64;
+	u32 val;
+
+	res = &pdev->resource[PCI_BRIDGE_RESOURCES];
+	for (j = 0; j < PCI_BRIDGE_RESOURCE_NUM; j++) {
+		if (!resource_size(&res[j]))
+			continue;
+
+		val = OF_PCI_ADDR_FIELD_NONRELOC;
+		if (of_pci_set_addr_flags(&res[j], &val))
+			continue;
+
+		rp[i].parent_addr_hi = cpu_to_be32(val);
+
+		val64 = res[j].start;
+		rp[i].parent_addr_mid =
+			cpu_to_be32(FIELD_GET(OF_PCI_ADDR_HI, val64));
+		rp[i].parent_addr_lo =
+			cpu_to_be32(FIELD_GET(OF_PCI_ADDR_LO, val64));
cpu_to_be64(res[j].start) would be simpler, but then you'll need
unaligned accessors.

This all could use some refactoring as you write 3 cell PCI addreses in
several places. Something like:

of_pci_set_address(__be32 *prop, u64 addr, u32 flags)
Ok. Thanks for pointing this out.

+
+		val64 = resource_size(&res[j]);
+		rp[i].size_hi = cpu_to_be32(FIELD_GET(OF_PCI_SIZE_HI, val64));
+		rp[i].size_lo = cpu_to_be32(FIELD_GET(OF_PCI_SIZE_LO, val64));
+
+		rp[i].child_addr_hi = rp[i].parent_addr_hi;
+		rp[i].child_addr_mid = rp[i].parent_addr_mid;
+		rp[i].child_addr_lo = rp[i].parent_addr_lo;
+		i++;
+	}
+
+	ret = of_changeset_add_prop_u32_array(ocs, np, "ranges", (u32 *)rp,
+					      i * sizeof(*rp) / sizeof(u32));
+
+	return ret;
+}
+
+static int of_pci_prop_reg(struct pci_dev *pdev, struct of_changeset *ocs,
+			   struct device_node *np)
+{
+	struct of_pci_addr_pair *reg;
+	int i = 1, resno, ret = 0;
+	u32 reg_val, base_addr;
+	resource_size_t sz;
+
+	reg = kzalloc(sizeof(*reg) * (PCI_STD_NUM_BARS + 1), GFP_KERNEL);
+	if (!reg)
+		return -ENOMEM;
+
+	reg_val = FIELD_PREP(OF_PCI_ADDR_FIELD_SS, OF_PCI_ADDR_SPACE_CONFIG) |
+		FIELD_PREP(OF_PCI_ADDR_FIELD_BUS, pdev->bus->number) |
+		FIELD_PREP(OF_PCI_ADDR_FIELD_DEV, PCI_SLOT(pdev->devfn)) |
+		FIELD_PREP(OF_PCI_ADDR_FIELD_FUNC, PCI_FUNC(pdev->devfn));
+	reg[0].phys_hi = cpu_to_be32(reg_val);
+
+	base_addr = PCI_BASE_ADDRESS_0;
+	for (resno = PCI_STD_RESOURCES; resno <= PCI_STD_RESOURCE_END;
+	     resno++, base_addr += 4) {
+		sz = pci_resource_len(pdev, resno);
+		if (!sz)
+			continue;
+
+		ret = of_pci_set_addr_flags(&pdev->resource[resno], &reg_val);
+		if (!ret)
+			continue;
+
+		reg_val &= ~OF_PCI_ADDR_FIELD_REG;
+		reg_val |= FIELD_PREP(OF_PCI_ADDR_FIELD_REG, base_addr);
+		reg[i].phys_hi = cpu_to_be32(reg_val);
+		reg[i].size_hi = cpu_to_be32(FIELD_GET(OF_PCI_SIZE_HI, sz));
+		reg[i].size_lo = cpu_to_be32(FIELD_GET(OF_PCI_SIZE_LO, sz));
+		i++;
+	}
+
+	ret = of_changeset_add_prop_u32_array(ocs, np, "reg", (u32 *)reg,
+					      i * sizeof(*reg) / sizeof(u32));
+	kfree(reg);
+
+	return ret;
+}
+
+static int of_pci_prop_compatible(struct pci_dev *pdev,
+				  struct of_changeset *ocs,
+				  struct device_node *np)
+{
+	const char *compat_strs[PROP_COMPAT_NUM] = { 0 };
+	int i, ret;
+
+	compat_strs[PROP_COMPAT_PCI_VVVV_DDDD] =
+		kasprintf(GFP_KERNEL, "pci%x,%x", pdev->vendor, pdev->device);
+	compat_strs[PROP_COMPAT_PCICLASS_CCSSPP] =
+		kasprintf(GFP_KERNEL, "pciclass,%06x", pdev->class);
+	compat_strs[PROP_COMPAT_PCICLASS_CCSS] =
+		kasprintf(GFP_KERNEL, "pciclass,%04x", pdev->class >> 8);
+
+	ret = of_changeset_add_prop_string_array(ocs, np, "compatible",
+						 compat_strs, PROP_COMPAT_NUM);
+	for (i = 0; i < PROP_COMPAT_NUM; i++)
+		kfree(compat_strs[i]);
+
+	return ret;
+}
+
+static int (*of_pci_endpoint_props[])(struct pci_dev *pdev,
+				      struct of_changeset *ocs,
+				      struct device_node *np) = {
+	of_pci_prop_reg,
+	of_pci_prop_compatible,
+	NULL
+};
+
+static int (*of_pci_bridge_props[])(struct pci_dev *pdev,
+				    struct of_changeset *ocs,
+				    struct device_node *np) = {
+	of_pci_prop_device_type,
+	of_pci_prop_address_cells,
+	of_pci_prop_size_cells,
+	of_pci_prop_ranges,
+	of_pci_prop_reg,
+	of_pci_prop_compatible,
+	NULL
+};
+
+int of_pci_add_properties(struct pci_dev *pdev, struct of_changeset *ocs,
+			  struct device_node *np)
+{
+	int (**prop_func)(struct pci_dev *pdev, struct of_changeset *ocs,
+			  struct device_node *np);
+	int i, ret;
+
+	if (pci_is_bridge(pdev))
+		prop_func = of_pci_bridge_props;
Skip all this indirection and just make everything direct function
calls.

ok


Thanks,

Lizhi


+	else
+		prop_func = of_pci_endpoint_props;
+
+	for (i = 0; prop_func[i]; i++) {
+		ret = prop_func[i](pdev, ocs, np);
+		if (ret) {
+			/*
+			 * The added properties will be released when the
+			 * changeset is destroyed.
+			 */
+			return ret;
+		}
+	}
+
+	return 0;
+}
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 49238ddd39ee..1540c4c9a770 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1628,7 +1628,8 @@ static int pci_dma_configure(struct device *dev)
  	bridge = pci_get_host_bridge_device(to_pci_dev(dev));
if (IS_ENABLED(CONFIG_OF) && bridge->parent &&
-	    bridge->parent->of_node) {
+	    bridge->parent->of_node &&
+	    !of_node_check_flag(bridge->parent->of_node, OF_DYNAMIC)) {
  		ret = of_dma_configure(dev, bridge->parent->of_node, true);
  	} else if (has_acpi_companion(bridge)) {
  		struct acpi_device *adev = to_acpi_device_node(bridge->fwnode);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 785f31086313..bd81dc4ca04f 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -678,6 +678,25 @@ static inline int devm_of_pci_bridge_init(struct device *dev, struct pci_host_br
#endif /* CONFIG_OF */ +struct of_changeset;
+
+#ifdef CONFIG_PCI_DYNAMIC_OF_NODES
+void of_pci_make_dev_node(struct pci_dev *pdev);
+void of_pci_remove_node(struct pci_dev *pdev);
+int of_pci_add_properties(struct pci_dev *pdev, struct of_changeset *ocs,
+			  struct device_node *np);
+#else
+static inline void
+of_pci_make_dev_node(struct pci_dev *pdev)
+{
+}
+
+static inline void
+of_pci_remove_node(struct pci_dev *pdev)
+{
+}
+#endif /* CONFIG_PCI_DYNAMIC_OF_NODES */
+
  #ifdef CONFIG_PCIEAER
  void pci_no_aer(void);
  void pci_aer_init(struct pci_dev *dev);
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index 4c54c75050dc..0eaa9d9a3609 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -23,6 +23,7 @@ static void pci_stop_dev(struct pci_dev *dev)
  		device_release_driver(&dev->dev);
  		pci_proc_detach_device(dev);
  		pci_remove_sysfs_dev_files(dev);
+		of_pci_remove_node(dev);
pci_dev_assign_added(dev, false);
  	}
--
2.17.1





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux