Convert the Amlogic Meson IR remote control receiver bindings to dt-schema. Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> --- .../bindings/media/amlogic,meson6-ir.yaml | 43 ++++++++++++++++++++++ .../devicetree/bindings/media/meson-ir.txt | 20 ---------- 2 files changed, 43 insertions(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml new file mode 100644 index 000000000000..f8bc445b1f25 --- /dev/null +++ b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/amlogic,meson6-ir.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson IR remote control receiver + +maintainers: + - Neil Armstrong <neil.armstrong@xxxxxxxxxx> + +allOf: + - $ref: rc.yaml# + +properties: + compatible: + enum: + - amlogic,meson6-ir + - amlogic,meson8b-ir + - amlogic,meson-gxbb-ir + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + ir-receiver@c8100480 { + compatible = "amlogic,meson6-ir"; + reg = <0xc8100480 0x20>; + interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; + }; diff --git a/Documentation/devicetree/bindings/media/meson-ir.txt b/Documentation/devicetree/bindings/media/meson-ir.txt deleted file mode 100644 index efd9d29a8f10..000000000000 --- a/Documentation/devicetree/bindings/media/meson-ir.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Amlogic Meson IR remote control receiver - -Required properties: - - compatible : depending on the platform this should be one of: - - "amlogic,meson6-ir" - - "amlogic,meson8b-ir" - - "amlogic,meson-gxbb-ir" - - reg : physical base address and length of the device registers - - interrupts : a single specifier for the interrupt from the device - -Optional properties: - - linux,rc-map-name: see rc.txt file in the same directory. - -Example: - - ir-receiver@c8100480 { - compatible= "amlogic,meson6-ir"; - reg = <0xc8100480 0x20>; - interrupts = <0 15 1>; - }; -- b4 0.10.1
